Infrared Absorption Spectra of Alternating Copolymers of Butadiene with Acrylonitrile and Deuterated Analogs

1975 ◽  
Vol 48 (4) ◽  
pp. 719-727
Author(s):  
J. Furukawa ◽  
E. Kobatashi ◽  
K. Uratani ◽  
Y. Iseda ◽  
J. Umemura ◽  
...  

Abstract Random copolymers consisting of various amounts of butadiene and acrylonitrile have been prepared by conventional radical initiators or Ziegler—Natta catalysts. Recently, a novel alternating copolymer of butadiene with acrylonitrile was successfully prepared by the authors using a system of organoaluminum halide—transition metal compound as a catalyst. The NMR and x-ray analyses of the alternating copolymer indicated a high alternating regularity and trans regularity of the butadiene unit. Studies of mechanical properties of the copolymer suggested that the alternating copolymer was more flexible and stronger than the random copolymers. This report deals with a study of the ir spectra under stretching of the alternating copolymer influenced by the regularity of the molecular structure. The ir spectra of trans-1,4-polybutadiene have been studied by several authors and the assignments of the absorption bands of polyacrylonitrile have been given by Liang and Tadokoro et al. Tentative assignments of the absorption bands of the alternating copolymer were attempted on the basis of ir spectra and ir dichroism of partially deuterated copolymers and correlations with the results obtained on the above-mentioned homopolymers.

1973 ◽  
Vol 46 (4) ◽  
pp. 1068-1076 ◽  
Author(s):  
M. Hirooka ◽  
K. Mashita ◽  
S. Imai ◽  
T. Kato

Abstract There have been few studies on how the nature of copolymers is affected by their sequential structure. This is because, in the past, the sequential structure of most copolymers could not be controlled at will. However, such studies have been realized since it was found that alternating sequential regulation can be attained from many monomer combinations, from which only random copolymers had been obtained previously, provided the copolymerization was carried out in the presence of a Lewis acid, such as an alkylaluminum halide. This kind of reaction is termed complexed copolymerization, as distinguished from the conventional alternating copolymerization. Furukawa and coworkers indicated that alternating butadiene—acrylonitrile copolymer is superior in various properties to the corresponding 1:1 random copolymer. Yabumoto and coworkers noticed that 1:1 styrene—acrylonitrile copolymer obtained in the presence of zinc chloride had a higher glass transition temperature than that of the corresponding 1:1 random copolymer made by radical copolymerization. Moreover, the former was hardly colored due to substantial absence of acrylonitrile—acrylonitrile bonds. Thus, it is very interesting how the properties of eopolymers are affected by sequential structure. The present paper describes various properties of alternating copolymers. The first part of this paper introduces a newly developed alternating copolymer of isobutylene and an acrylic ester and compares it with the corresponding homo-polymers. The latter part deals with comparison of alternating and random copolymers. Equimolar copolymers of styrene and acrylonitrile are compared in physical and mechanical properties. Glass transition temperatures of equimolar alternating and random copolymers of various vinyl compounds are compared. An interesting correlation is shown and discussed on the basis of a thermodynamic treatment.


2015 ◽  
Vol 642 ◽  
pp. 259-263
Author(s):  
Hirotomo Watanabe ◽  
Chiharu Tadokoro ◽  
Shinya Sasaki

To understand the effects of tribo-film formation derived from ZnDTP (zinc dialkyl ditio phosphate) on friction behavior, friction tests were carried out with varying sliding time. The sliding surfaces were analyzed using Fourier transform infrared spectroscopy (FT-IR) and X-ray Photoelectron Spectroscopy (XPS). On the basis of the surface analytical results of the tribo-film, the absorption bands in the region of 1300-1000 cm-1 assigned as polyphosphate appeared in all IR spectra after the sliding. The friction behavior of ZnDTP was related to the intensity change of the IR spectra peak at 1200 cm-1.


Author(s):  
Yuliya N. Kul’pina ◽  
Valery Yu. Prokof’ev ◽  
Natalia E. Gordina ◽  
Olga E. Khmylova ◽  
Nina V. Petukhova ◽  
...  

A brief description of the low-modulus zeolites structure is given. Constructions of "building" units were discussed. Namely, the structures of TO4 tetrahedron, a simple four-membered ring (S4R), a double four-membered ring (D4R), a simple six-membered ring (S6R), a double six-membered ring (D6R), α-cell and β-cell were described in details. IR spectroscopy and X-ray diffraction were used to study the structure of zeolites. The types of interatomic bonds vibrations (stretching and deformation) were represented. The reasons of the absorption bands appearance in the IR spectra were described. The literature data for IR spectroscopy studies of zeolites structure were summarized. The ranges of localization of absorption bands on IR spectra for aluminosilicate frameworks as well as for OH groups and molecular water were identified. The absorption bands which correspond to the stretching and deformation vibrations of TO4, S4R, D4R, S6R and D6R were revealed. The examples of X-ray patterns and infrared spectra for the LTA and SOD samples were given. These samples were prepared from mixtures of metakaolin and sodium hydroxide with an atomic ratio Si: Al equals to 1: 1 and 1: 1⅓ using mechanochemical activation or ultrasonic treatment and calcined at various temperatures. It was shown that in the IR spectrum of SOD, absorption bands of TO4 and S4R were distinctly identified. The effect of mechanochemical and ultrasonic treatment of raw ingredients on the intensity of absorption bands was established. Also, the change in the IR spectrum of the LTA zeolite after calcination was demonstrated. It was found that with increasing calcination temperature, the intensity of the absorption bands of S4R, D4R decreases, which indicates the destruction of the zeolite framework.For citation:Kul’pina Yu.N., Prokof’ev V.Yu., Gordina N.E., Khmylova O.E., Petukhova N.V., Gazakhova S.I. Use of ir spectroscopy for study of structure of low-modulus zeolites. Izv. Vyssh. Uchebn. Zaved. Khim. Khim. Tekhnol. 2017. V. 60. N 5. P. 44-50.


Author(s):  
Afzana Anwer ◽  
S. Eilidh Bedford ◽  
Richard J. Spontak ◽  
Alan H. Windle

Random copolyesters composed of wholly aromatic monomers such as p-oxybenzoate (B) and 2,6-oxynaphthoate (N) are known to exhibit liquid crystalline characteristics at elevated temperatures and over a broad composition range. Previous studies employing techniques such as X-ray diffractometry (XRD) and differential scanning calorimetry (DSC) have conclusively proven that these thermotropic copolymers can possess a significant crystalline fraction, depending on molecular characteristics and processing history, despite the fact that the copolymer chains possess random intramolecular sequencing. Consequently, the nature of the crystalline structure that develops when these materials are processed in their mesophases and subsequently annealed has recently received considerable attention. A model that has been consistent with all experimental observations involves the Non-Periodic Layer (NPL) crystallite, which occurs when identical monomer sequences enter into register between adjacent chains. The objective of this work is to employ electron microscopy to identify and characterize these crystallites.


MRS Advances ◽  
2020 ◽  
Vol 5 (62) ◽  
pp. 3273-3282
Author(s):  
I. Cosme-Torres ◽  
M.G. Macedo-Miranda ◽  
S.M. Martinez-Gallegos ◽  
J.C. González-Juárez ◽  
G. Roa-Morales ◽  
...  

AbstractThe heterogeneous catalyst HTCMgFe was used in the degradation of the IC, through the heterogeneous photo-fenton treatment, this material in combination with H2O2 and UV light degraded the dye in 30 min at pH 3. As the amount of HTCMgFe increases the degradation it was accelerated because there are more active catalytic sites of Fe2+ on the surface of the material, which generates a greater amount of •OH radicals. The HTCMgFe was characterized by infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and X-ray energy dispersive elemental analysis (EDS). The UV-vis spectrum shows that the absorption bands belonging to the chromophore group of the IC disappear as the treatment time passes, indicating the degradation of the dye.


2020 ◽  
Vol 11 (47) ◽  
pp. 7497-7505
Author(s):  
Jiannan Cheng ◽  
Kai Tu ◽  
Enjie He ◽  
Jinying Wang ◽  
Lifen Zhang ◽  
...  

A novel strategy for preparing block copolymers with semifluorinated alternating copolymers as macroinitiators was established by photocontrolled iodine-mediated RDRP under irradiation with blue LED light at room temperature.


Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2160
Author(s):  
Alexander Bogdanov ◽  
Ekaterina Kaneva ◽  
Roman Shendrik

Elpidite belongs to a special group of microporous zirconosilicates, which are of great interest due to their capability to uptake various molecules and ions, e.g., some radioactive species, in their structural voids. The results of a combined electron probe microanalysis and single-crystal X-ray diffraction study of the crystals of elpidite from Burpala (Russia) and Khan-Bogdo (Mongolia) deposits are reported. Some differences in the chemical compositions are observed and substitution at several structural positions within the structure of the compounds are noted. Based on the obtained results, a detailed crystal–chemical characterization of the elpidites under study was carried out. Three different structure models of elpidite were simulated: Na2ZrSi6O15·3H2O (related to the structure of Russian elpidite), partly Ca-replaced Na1.5Ca0.25ZrSi6O15·2.75H2O (close to elpidite from Mongolia), and a hypothetical CaZrSi6O15·2H2O. The vibration spectra of the models were obtained and compared with the experimental one, taken from the literature. The strong influence of water molecule vibrations on the shape of IR spectra of studied structural models of elpidite is discussed in the paper.


2012 ◽  
Vol 217-219 ◽  
pp. 733-736
Author(s):  
Xiu Mei Han ◽  
Shu Ai Hao ◽  
Ying Ling Wang ◽  
Gui Fang Sun ◽  
Xi Wei Qi

Zn2SiO4:Eu3+, Dy3+ phosphors have been prepared through the sol-gel process. X-ray diffraction (XRD), thermogravimetric and ddifferential thermal analysis (TG-DTA), FT-IR spectra and photoluminescence spectra were used to characterize the resulting phosphors. The results of XRD indicated that the phosphors crystallized completely at 1000oC. In Zn2SiO4:Eu3+,Dy3+ phosphors, the Eu3+ and Dy3+ show their characteristic red(613nm, 5D0-7F2), blue (481nm, 4F9/2–6H15/2) and yellow (577nm, 4F9/2–6H13/2) emissions.


2022 ◽  
Vol 1049 ◽  
pp. 218-223
Author(s):  
Aleksandr S. Kazachenko ◽  
Yuriy N. Malyar ◽  
Anna S. Kazachenko

Sulfated derivatives of polysaccharides have anticoagulant, hypolipedimic and other biological activity. In this work, a complex mixed ester of galactomannan, its sulfate-citrate, was obtained for the first time. The introduction of citrate and sulfate groups was proved by FTIR spectroscopy by the appearance of corresponding absorption bands. It was shown by X-ray diffraction that the introduction of the citrate group leads to the amorphization of the galactomannan structure.


2021 ◽  
Vol 43 (3) ◽  
pp. 198-203
Author(s):  
S.M. KUZMENKO ◽  
◽  
E.O. SPORYAGIN ◽  
O.M. KUZMENKO ◽  
A.YA. PUZENKO ◽  
...  

The paper describes the synthesis, the reaction of a mixture of isomers (2,4–2,6) of toluilendiisocyanate with a double molar excess of aliphatic individual or oligomeric diols, a number of previously unknown oligodiuretanediols and their physicochemical constants. It is shown that with an increase in the synthesis temperature from 50 to 70 °C, the reaction time to complete depletion in the mixture of free NCO-groups decreases from 8–9 hours to 3–4 hours. The reaction temperature of 70–2 °С should be considered optimal, because at higher temperatures side reactions of free NCO-groups with already formed urethane ones are possible. Because the presence of even a small amount of moisture in the diols can provoke side effects during the urethane formation reaction, all of the above diols were dried from the adsorbed moisture by azeotropic distillation with toluene before use in the reaction. Since the final products are even at the synthesis temperature (68–70 °C) viscous liquids, and there are difficulties with the homogenization of the reaction mass during synthesis, and when unloading the finished product from the reaction plant, in all cases, the synthesis was performed in solution cyclohexanone by 50 % by weight of the final product. Control of the reaction was performed by changing the % wt. free NCO-groups in time. The reaction was considered complete if the measured % wt. free NCO-groups in the reaction mixture for at least one hour twice showed zero. The isolated oligodiuretanediols range from solid at room temperature to very viscous products, which significantly depends on the molecular weight of the diol used in the reaction (ie the concentration of urethane groups formed). They are homogeneous, transparent compounds that are readily soluble in esters, ethers, aromatic and halide-containing, aprotic solvents, ketones, poorly or completely insoluble in aliphatic saturated hydrocarbons. The structure of the synthesized oligomeric products is confirmed by functional analysis, IR–spectra. In the IR-spectra of each of the synthesized oligodiuretanediols there are no absorption bands in the region of 2270 cm-1, which confirms the complete completion of the reaction of urethane formation according to the scheme. At the same time, the absorption bands in the region of 3450 cm-1, 1720 cm-1, 1540 cm-1 are fixed, which are characteristic of the presence of urethane groups in the structure of the target products. As the chain length of the diol component –R– increases in the target product (which synchronously leads to an increase in molecular weight), the intensity of these absorption bands decreases, which is associated with a decrease in the concentration of formed urethane groups in the structure of oligodiuretanediols. The refractive index also decreases synchronously. Synthesized series of oligodiuretanediols can be used for synthesis on its basis of other classes of oligomers with the simultaneous presence in the structure of urethane groups. The ability of such compounds to be soluble in solvents of different nature has been studied, which provides information for the directions of their further use (varnishes, enamels, primers).


Sign in / Sign up

Export Citation Format

Share Document