Recent Advances in Anionic Synthesis of Functionalized Elastomers Using Functionalized Alkyllithium Initiators

1996 ◽  
Vol 69 (3) ◽  
pp. 444-461 ◽  
Author(s):  
Roderic P. Quirk ◽  
Sung Hoon Jang ◽  
Jungahn Kim
Keyword(s):  
Molecular Weight ◽  
Molecular Weights ◽  
Hydrocarbon Solvents ◽  
Molecular Weight Distributions ◽  
Recent Advances ◽  
Anionic Synthesis ◽  
Weight Distributions ◽  
Technological Developments ◽  
Α Chain

Abstract The results described herein demonstrate the advantages of functionalized initiators with respect to the efficiency of α-chain-end functionalization and the ability to effect post-polymerization functionalization and linking reactions with the living ω-carbanionic chain ends. Not all functionalized initiators are useful, however, because either: (a) they are not soluble in hydrocarbon solvents; or (b) they are not reactive enough to initiate polymerization at rates which are competitive with propagation to prepare polymers with narrow molecular weight distributions and controlled molecular weights; or (c) they are either too difficult to prepare or too expensive to prepare to be readily available for commercial elastomer production. The advantages of using funcitonalized initiators, however, should encourage further scientific and technological developments in this area.

Environmentally Benign Adhesive Synthesized by Dispersion Copolymerization of Styrene and Butyl Acrylate

2006 ◽  
Vol 11-12 ◽  
pp. 757-760
Author(s):  
Jun Ying Zhang ◽  
Peng Dou
Keyword(s):  
Molecular Weight ◽  
Butyl Acrylate ◽  
Monomer Concentration ◽  
Environmentally Benign ◽  
Functional Monomer ◽  
Molecular Weights ◽  
Molecular Weight Distributions ◽  
Stabilizer Concentration ◽  
Ethanol Medium ◽  
Weight Distributions

Environmentally benign adhesive was synthesized by dispersion copolymerization of styrene(St) and butyl acrylate (BA) in an ethanol medium with benzoyl peroxide (BPO) as the initiator and poly(vinylpyrrolidone) as the stabilizer in the presence of acrylic acid(AA) as the functional monomer. The effect of the concentration of stabilizer, initiator and functional monomer on the conversions, molecular weights and molecular weight distributions was investigated. The results show that the conversions almost keep invariable with the increasing of stabilizer concentration, but the molecular weights increase and molecular weight distributions decrease. Conversions increase with the increasing of initiator concentration, but the molecular weights and molecular weight distributions decrease. However with the increasing of functional monomer concentration, conversions and molecular weight distributions increase but the molecular weights decrease.

scholarly journals Naturally-Derived Amphiphilic Polystyrenes Prepared by Aqueous Controlled/Living Cationic Polymerization and Copolymerization of Vinylguaiacol with R–OH/BF3·OEt2

Polymers ◽  
2018 ◽  
Vol 10 (12) ◽  
pp. 1404 ◽  
Author(s):  
Hisaaki Takeshima ◽  
Kotaro Satoh ◽  
Masami Kamigaito
Keyword(s):  
Molecular Weight ◽  
Ferulic Acid ◽  
Cationic Polymerization ◽  
Living Polymerization ◽  
Block Copolymerization ◽  
Molecular Weights ◽  
Molecular Weight Distributions ◽  
Living Cationic Polymerization ◽  
Naturally Occurring ◽  
Weight Distributions

In this study, we investigated direct-controlled/living cationic polymerization and copolymerization of 4-vinylguaiacol (4VG), i.e., 4-hydroxy-3-methoxystyrene, which can be derived from naturally-occurring ferulic acid, to develop novel bio-based amphiphilic polystyrenes with phenol functions. The controlled/living cationic polymerization of 4VG was achieved using the R–OH/BF3·OEt2 initiating system, which is effective for the controlled/living polymerization of petroleum-derived 4-vinylphenol in the presence of a large amount of water via reversible activation of terminal C–OH bond catalyzed by BF3·OEt2, to result in the polymers with controlled molecular weights and narrow molecular weight distributions. The random or block copolymerization of 4VG was also examined using p-methoxystyrene (pMOS) as a comonomer with an aqueous initiating system to tune the amphiphilic nature of the 4VG-derived phenolic polymers. The obtained polymer can be expected not only to be used as a novel styrenic bio-based polymer but also as a material with amphiphilic nature for some applications.

Relationships between Molecular Weights and Rheological Properties of Asphalts

1996 ◽  
Vol 1535 (1) ◽  
pp. 10-14 ◽  
Author(s):  
Jan F. B ranthaver ◽  
Raymond E. Robertson ◽  
John J. Duvall
Keyword(s):  
Molecular Weight ◽  
Rheological Properties ◽  
Size Exclusion Chromatography ◽  
Size Exclusion ◽  
Molecular Weights ◽  
Molecular Weight Distributions ◽  
Molecular Associations ◽  
Weight Distributions ◽  
Exclusion Chromatography ◽  
Microstructural Model

It is known that the rheological properties of mixtures of organic compounds are functions of molecular weight distributions. However, with respect to asphalts, which are composed of many different compounds and compound types, molecular weights are difficult to measure. This difficulty occurs because the molecular associations that form are held together by forces of varying strengths and are partly broken up by heat and solvents. In theory, the strongest molecular associations in asphalts should have the greatest influence on the rheological properties of asphalts. These associations would be expected to be the major contributors to the asphalt's behaving as if it were a relatively high molecular weight material. Asphalt molecular associations should be isolatable by means of size exclusion chromatography. Several fractions of varying molecular weights (measured by membrane osmometry and vapor phase osmometry) were isolated from Strategic Highway Research Program (SHRP) asphalt AAD-1 by preparative size exclusion chromatography. Molecular weights of these fractions ranged from approximately 2,000 daltons to over 40,000 daltons. When these fractions were independently mixed with asphalt AAD-1 solvent moiety, mixtures were obtained whose rheological properties were a function of the molecular weights and concentrations of the associated materials. These results support the microstructural model of asphalt proposed during SHRP. The results also suggest that the unusual rheological properties of some asphalts may be explained by measuring molecular weight distributions. This type of information may be useful for modification of asphalts to achieve desirable rheological properties.

Molecular Weight Determinations Of Low Molecular Weight (LMW) Heparins By Ultracentrifugation And High Pressure Liquid Chromatography

1981 ◽  
Author(s):  
Grant Barlow ◽  
N Sugisaka ◽  
F J Petracek
Keyword(s):  
Molecular Weight ◽  
High Pressure ◽  
Liquid Chromatography ◽  
High Pressure Liquid Chromatography ◽  
Low Molecular Weight ◽  
Analytical Ultracentrifuge ◽  
Molecular Weights ◽  
Molecular Weight Distributions ◽  
Weight Distributions ◽  
Heparin Fractions

Molecular weights were independently determined on nitrous acid depolymerized LMW heparin fractions ranging from 2-15 daltons using the analytical ultracentrifuge and high pressure liquid chromatography (HPLC).Sedimentation-diffusion equilibria were obtained in the analytical ultracentrifuge using speeds ranging from 20,000 to 56,000 rpm. Near theta conditions were obtained using 0.5M NaCl as the solvent. Calculations of molecular weight distributions and, from those figures, weight average molecular weights were made using the method described by Scholte (N.Y. Acad Sci. 164, 156, 1969). The results show that weight average values as low as 2,000 daltons can be determined.Sedimentation-diffusion equilibria were obtained in the analytical ultracentrifuge using speeds ranging from 20,000 to 56,000 rpm. Near theta conditions were obtained using 0.5M NaCl as the solvent. Calculations of molecular weight distributions and, from those figures, weight average molecular weights were made using the method described by Scholte (N.Y. Acad Sci. 164, 156, 1969). The results show that weight average values as low as 2,000 daltons can be determined.The HPLC results were obtained using previously described methods (Fed Proc. 36, 89, 1977) and a new highly efficient gel column (TSK gels). Fractionated dextrans were used as reference standards.

Mechanical and Viscoelastic Characterization of Hyperbranched Polyisobutylenes

2002 ◽  
Vol 75 (5) ◽  
pp. 853-864 ◽  
Author(s):  
Judit E. Puskas ◽  
Christophe Paulo ◽  
Volker Altstädt
Keyword(s):  
Molecular Weight ◽  
Butyl Rubber ◽  
Structure Property ◽  
Carbocationic Polymerization ◽  
Molecular Weights ◽  
Structure Property Relationships ◽  
Molecular Weight Distributions ◽  
Weight Distributions ◽  
Living Carbocationic Polymerization

Abstract Structure-property relationships were investigated in hyperbranched polyisobutylenes, in comparison with commercial linear butyl rubber. The gel-free, soluble hyperbranched polyisobutylenes, synthesized by living carbocationic polymerization, had molecular weights, Mw≈400,000 to 1,000,000 g/mol, molecular weight distributions, MWD ≈1.2 to 2.6, and branching frequencies, BR ≈ 4 to 60. The mechanical and viscoelastic characterization of these polymers revealed interesting properties, including the characteristics of crosslinked rubbers.

Structural studies of oligosilanes produced by catalytic dehydrogenative coupling of primary organosilanes

1987 ◽  
Vol 65 (8) ◽  
pp. 1804-1809 ◽  
Author(s):  
C. Aitken ◽  
J. F. Harrod ◽  
U. S. Gill
Keyword(s):  
Molecular Weight ◽  
Nuclear Magnetic Resonance ◽  
Gel Permeation Chromatography ◽  
Structural Studies ◽  
Molecular Weights ◽  
Molecular Weight Distributions ◽  
Dehydrogenative Coupling ◽  
Weight Distributions ◽  
Gel Permeation ◽  
End Groups

The structures of some poly(organosilylenes), [Formula: see text] (R = Ph, p-tolyl, n-hexyl, and benzyl), produced by catalytic dehydrogenative coupling of primary silanes have been studied by infrared, nuclear magnetic resonance, and mass spectroscopies. These results, combined with data on molecular weights and molecular weight distributions from vapour pressure osmometry and gel permeation chromatography, lead to the conclusion that the polymers are linear and have SiH2R end groups. The polymers all have degrees of polymerization of ca. 10 and very narrow molecular weight dipersions. Some possible features of the mechanism that gives rise to this behaviour are discussed.

Synthesis and Properties of Uniform Polyisoprene Networks. I. Synthesis and Characterization of α,ω-Dihydroxy-Polyisoprene

1976 ◽  
Vol 49 (2) ◽  
pp. 303-319 ◽  
Author(s):  
M. Morton ◽  
L. J. Fetters ◽  
J. Inomata ◽  
D. C. Rubio ◽  
R. N. Young
Keyword(s):  
Molecular Weight ◽  
Physical Properties ◽  
Soluble Fraction ◽  
Synthesis And Characterization ◽  
Molecular Weights ◽  
Molecular Weight Distributions ◽  
Weight Distributions ◽  
The Subject

Abstract The results of this study are the first to show that high-1,4 linear α,ω-dihydroxypolydienes can be synthesized with (a) predictable molecular weights, (b) narrow molecular weight distributions, and (c) high functionalities. Using the functionalized polyisoprenes prepared in this work, a series of networks was prepared with a purified triisocyanate as the chain linking agent. The soluble fraction in these networks ranged from 4.6 to 1.6 per cent. The characteristics and physical properties of these networks will be the subject of a forthcoming publication.

Sign in / Sign up

Export Citation Format

Share Document