Wear of Metal by Rubber

1980 ◽  
Vol 53 (1) ◽  
pp. 176-185
Author(s):  
A. N. Gent ◽  
C. T. R. Pulford

Abstract Rates of wear have been determined for steel and bronze scrapers sliding over rubber surfaces. The wear rates were found to depend strongly upon the particular elastomer used, varying by orders of magnitude even though the other ingredients in the compound and the physical properties of the rubber were largely unchanged. In the absence of oxygen the metal scrapers were found to wear away much faster in general; by a factor of 5 to 50 times, depending upon the elastomer. Butyl rubber was anomalous in this respect, however, causing three times greater wear in air than in nitrogen. These diverse observations are attributed to the direct attack upon metals of free radical species generated by mechanical rupture of elastomer molecules during abrasion. The rate of metal wear is closely correlated with the stability of polymeric radicals formed in this way. When the radical is highly reactive it is thought to take part primarily in internal reactions and thus cause little wear of the scraper. On the other hand, relatively stable polymer radicals appear to attack metals vigorously.

2010 ◽  
Vol 2010 ◽  
pp. 1-6 ◽  
Author(s):  
Yih-Sheng Huang ◽  
Sheng-Haur Yu ◽  
Yea-Ru Sheu ◽  
Kuo-Shien Huang

This experiment aims to produce a free radical while annoying the oxidizing-reducing reagent of the ammonium persulfate and the sodium bisulfite under nitrogen, then trigger copolymerization between modified-mica and chitosan to prepare a variety of copolymers. This experiment also aims to study the related properties of these copolymer materials. The experimental data shows that the copolymer has more thermal stability and better absorption of UV than chitosan. But the above physical properties will be less if the mica ratio in copolymer is more than 8%. On the other hand, the SEM photo of the microstructure also shows that the modified mica distributes homogeneously on the surface of the film of the copolymer.


2021 ◽  
Vol 81 (4) ◽  
Author(s):  
Adrià Delhom ◽  
J. R. Nascimento ◽  
Gonzalo J. Olmo ◽  
A. Yu. Petrov ◽  
Paulo J. Porfírio

AbstractWe consider the metric-affine formulation of bumblebee gravity, derive the field equations, and show that the connection can be written as Levi-Civita of a disformally related metric in which the bumblebee field determines the disformal part. As a consequence, the bumblebee field gets coupled to all the other matter fields present in the theory, potentially leading to nontrivial phenomenological effects. To explore this issue we compute the post-Minkowskian, weak-field limit and study the resulting effective theory. In this scenario, we couple scalar and spinorial matter to the effective metric, and then we explore the physical properties of the VEV of the bumblebee field, focusing mainly on the dispersion relations and the stability of the resulting effective theory.


Author(s):  
Godfrey C. Hoskins ◽  
V. Williams ◽  
V. Allison

The method demonstrated is an adaptation of a proven procedure for accurately determining the magnification of light photomicrographs. Because of the stability of modern electrical lenses, the method is shown to be directly applicable for providing precise reproducibility of magnification in various models of electron microscopes.A readily recognizable area of a carbon replica of a crossed-line diffraction grating is used as a standard. The same area of the standard was photographed in Phillips EM 200, Hitachi HU-11B2, and RCA EMU 3F electron microscopes at taps representative of the range of magnification of each. Negatives from one microscope were selected as guides and printed at convenient magnifications; then negatives from each of the other microscopes were projected to register with these prints. By deferring measurement to the print rather than comparing negatives, correspondence of magnification of the specimen in the three microscopes could be brought to within 2%.


Alloy Digest ◽  
1960 ◽  
Vol 9 (7) ◽  

Abstract HAYNES STELLITE 98M2 Alloy is a cobalt-base alloy having higher compressive strength and higher hardness than all the other cobalt-base alloys at room temperature and in the red heat range. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on heat treating, machining, and joining. Filing Code: Co-22. Producer or source: Haynes Stellite Company.


2020 ◽  
Vol 12 (7) ◽  
pp. 2767 ◽  
Author(s):  
Víctor Yepes ◽  
José V. Martí ◽  
José García

The optimization of the cost and CO 2 emissions in earth-retaining walls is of relevance, since these structures are often used in civil engineering. The optimization of costs is essential for the competitiveness of the construction company, and the optimization of emissions is relevant in the environmental impact of construction. To address the optimization, black hole metaheuristics were used, along with a discretization mechanism based on min–max normalization. The stability of the algorithm was evaluated with respect to the solutions obtained; the steel and concrete values obtained in both optimizations were analyzed. Additionally, the geometric variables of the structure were compared. Finally, the results obtained were compared with another algorithm that solved the problem. The results show that there is a trade-off between the use of steel and concrete. The solutions that minimize CO 2 emissions prefer the use of concrete instead of those that optimize the cost. On the other hand, when comparing the geometric variables, it is seen that most remain similar in both optimizations except for the distance between buttresses. When comparing with another algorithm, the results show a good performance in optimization using the black hole algorithm.


2021 ◽  
Vol 5 (2) ◽  
pp. 32
Author(s):  
Esmehan Uçar ◽  
Sümeyra Uçar ◽  
Fırat Evirgen ◽  
Necati Özdemir

It is possible to produce mobile phone worms, which are computer viruses with the ability to command the running of cell phones by taking advantage of their flaws, to be transmitted from one device to the other with increasing numbers. In our day, one of the services to gain currency for circulating these malignant worms is SMS. The distinctions of computers from mobile devices render the existing propagation models of computer worms unable to start operating instantaneously in the mobile network, and this is particularly valid for the SMS framework. The susceptible–affected–infectious–suspended–recovered model with a classical derivative (abbreviated as SAIDR) was coined by Xiao et al., (2017) in order to correctly estimate the spread of worms by means of SMS. This study is the first to implement an Atangana–Baleanu (AB) derivative in association with the fractional SAIDR model, depending upon the SAIDR model. The existence and uniqueness of the drinking model solutions together with the stability analysis are shown through the Banach fixed point theorem. The special solution of the model is investigated using the Laplace transformation and then we present a set of numeric graphics by varying the fractional-order θ with the intention of showing the effectiveness of the fractional derivative.


Games ◽  
2021 ◽  
Vol 12 (3) ◽  
pp. 53
Author(s):  
Roberto Rozzi

We consider an evolutionary model of social coordination in a 2 × 2 game where two groups of players prefer to coordinate on different actions. Players can pay a cost to learn their opponent’s group: if they pay it, they can condition their actions concerning the groups. We assess the stability of outcomes in the long run using stochastic stability analysis. We find that three elements matter for the equilibrium selection: the group size, the strength of preferences, and the information’s cost. If the cost is too high, players never learn the group of their opponents in the long run. If one group is stronger in preferences for its favorite action than the other, or its size is sufficiently large compared to the other group, every player plays that group’s favorite action. If both groups are strong enough in preferences, or if none of the groups’ sizes is large enough, players play their favorite actions and miscoordinate in inter-group interactions. Lower levels of the cost favor coordination. Indeed, when the cost is low, in inside-group interactions, players always coordinate on their favorite action, while in inter-group interactions, they coordinate on the favorite action of the group that is stronger in preferences or large enough.


Of the commoner mineral acids the chemical changes of Nitric Acid, from their evident complexity, have formed the subject of numerous memoirs, while those of sulphuric acid, from their assumed simplicity, have been to some degree neglected; on the other hand, the physical properties of the latter have been studied with considerable elaboration, while those of the former have been passed over, doubtless on account of the corrosive nature of the acid and the difficulty of preparing and preserving it in a reasonable degree of purity. Further, with certain exceptions, the alterations in physical properties induced by the products of reduction, be they nitrogen peroxide or nitrous acid, either singly or conjointly, have attracted but little attention, though it is a common matter of observation that the current intensity of a Grove’s or other cell containing nitric acid remains constant, even though the fuming acid, originally colourless or red, has become of a deep green tint. It is more than probable that of the factors of Ohm’s law, both the E. M. F. and internal resistance are continually varying. At the earliest stages of the enquiry it was found that the passage of a few bubbles of nitric oxide gas into a considerable volume of nitric acid produced an alteration of one percent, in the resistance, and the same result could be effected to a less degree by exposure to sunlight, and to a still less degree by exposure to artificial illumination. Therefore, we determined to investigate the alterations of conductivity produced by changes of concentration and temperature in samples of acid purified with necessary precautions, more especially as former workers upon the subject have either used samples of acid confessedly impure, or have been silent as to any method of purification, or have adopted no special care in dealing with a substance so susceptible of polarisation.


1906 ◽  
Vol 1 (4) ◽  
pp. 454-469 ◽  
Author(s):  
H. M. Leake

In a stretch of arable lands like those of the Ganges Valley, although damage may be caused by occasional floods, which are sudden and of short duration, the more general, and by far the most serious loss is due to deficiency of moisture of the soil: thus the relation of the soil to soil moisture becomes of more than ordinary importance. Dr Voelcker, in his Report on Indian Agriculture, remarks: “In India the relation of soils to moisture acquires a greater significance than almost anywhere else.......” This relation is fundamental, for on it depends the methods for the conservation of soil moisture, for the economical application of irrigation water, and for the treatment of barren and salt lands—all problems of direct interest to agriculturists in the plains of Northern India. The methods for dealing with these problems must be largely—if not entirely—empirical until such time as the behaviour of the soil in its relation to moisture is investigated. The problem in all its various branches is enormous, and in a country in which the seasons follow each other with such rapidity, and vary the one from the other in so marked a manner, it frequently happens that a particular point, if not determined within a period of a few days, must await solution until the following year.


Sign in / Sign up

Export Citation Format

Share Document