scholarly journals INFLUENCE OF TEMPERATURE AND PH ON THE DECOMPOSITION KINETICS OF PERACETIC ACID IN AQUEOUS SOLUTIONS

2014 ◽  
Vol 44 (3) ◽  
pp. 195-201
Author(s):  
L. KUNIGK ◽  
S. P. GALIZIA ◽  
R.T. K. SHIKISHIMA ◽  
R. GEDRAITE ◽  
C. H. JURKIEWICZ
Keyword(s):  
Activation Energy ◽  
Aqueous Solutions ◽  
Peracetic Acid ◽  
Food Industry ◽  
Decomposition Kinetics ◽  
Order Reaction ◽  
Influence Of Temperature ◽  
First Order ◽  
All Solutions ◽  
Kinetics Of

Peracetic acid (PAA) is a strong oxidant used by the food industry as a sanitizer, in medical area as a disinfectant and by the textiles and paper industries as a bleacher. Its decomposition rate is an important parameter in these applications. The main purpose of this paper is to study the decomposition kinetics of PAA between 25 and 45 °C in solutions with pH 3.11, 5.0 and 7.0. The decomposition of PAA is a first-order reaction for all solutions and temperatures studied. The rate constants were between 2.08·10-3 and 9.44·10-3 h-1 (pH 3.11), between 2.61·10-3 and 16.69·10-3 h-1 (pH 5.0) and between 7.50·10-3 and 47.63·10-3 h-1 (pH 7.0). The activation energy of PAA decomposition in aqueous solutions are 58.36 and 72.89 kJ·mol-1 when pH was 3.11 and 5.0, respectively.

Pseudo-Homogenous Kinetics Model for the Synthesis of Dimethyl Carbonate from Urea and Methanol with Heterogeneous Catalyst

2011 ◽  
Vol 233-235 ◽  
pp. 481-486
Author(s):  
Wen Bo Zhao ◽  
Ning Zhao ◽  
Fu Kui Xiao ◽  
Wei Wei
Keyword(s):  
Experimental Data ◽  
Activation Energy ◽  
Dimethyl Carbonate ◽  
Side Reaction ◽  
Order Reaction ◽  
Zero Order ◽  
Kinetics Model ◽  
First Order ◽  
Zero Order Reaction ◽  
Kinetics Of

The synthesis of dimethyl carbonate (DMC) from urea and methanol includes two main reactions: one amino of urea is substituted by methoxy to produce the intermediate methyl carbamate (MC) which further converts to DMC via reaction with methanol again. In a stainless steel autoclave, the kinetics of these reactions was separately investigated without catalyst and with Zn-containing catalyst. Without catalyst, for the first reaction, the reaction kinetics can be described as first order with respect to the concentrations of methanol and methyl carbamate (MC), respectively. For the second reaction, the results exhibit characteristics of zero-order reaction. Over Zn-containing catalyst, the first reaction is neglected in the kinetics model since its rate is much faster than second reaction. After the optimization of reaction condition, the macro-kinetic parameters of the second reaction are obtained by fitting the experimental data to a pseudo-homogenous model, in which a side reaction of DMC synthesis is incorporated since it decreases the yield of DMC drastically at high temperature. The activation energy of the reaction from MC to DMC is 104 KJ/mol while that of the side reaction of DMC is 135 KJ/mol.

scholarly journals Kissinger Method in Kinetics of Materials: Things to Beware and Be Aware of

Molecules ◽  
2020 ◽  
Vol 25 (12) ◽  
pp. 2813 ◽  
Author(s):  
Sergey Vyazovkin
Keyword(s):  
Activation Energy ◽  
Isoconversional Methods ◽  
Single Step ◽  
Order Reaction ◽  
Kissinger Method ◽  
Scanning Calorimetry ◽  
First Order ◽  
Kinetics Of ◽  
Final Equation ◽  
Derivative Thermogravimetry

The Kissinger method is an overwhelmingly popular way of estimating the activation energy of thermally stimulated processes studied by differential scanning calorimetry (DSC), differential thermal analysis (DTA), and derivative thermogravimetry (DTG). The simplicity of its use is offset considerably by the number of problems that result from underlying assumptions. The assumption of a first-order reaction introduces a certain evaluation error that may become very large when applying temperature programs other than linear heating. The assumption of heating is embedded in the final equation that makes the method inapplicable to any data obtained on cooling. The method yields a single activation energy in agreement with the assumption of single-step kinetics that creates a problem with the majority of applications. This is illustrated by applying the Kissinger method to some chemical reactions, crystallization, glass transition, and melting. In the cases when the isoconversional activation energy varies significantly, the Kissinger plots tend to be almost perfectly linear that means the method fails to detect the inherent complexity of the processes. It is stressed that the Kissinger method is never the best choice when one is looking for insights into the processes kinetics. Comparably simple isoconversional methods offer an insightful alternative.

Studies on Metal Hydroxy Compounds. XIII. Thermal Analyses and Decomposition Kinetics of Hydroxystannates of Bivalent Metals

1971 ◽  
Vol 49 (17) ◽  
pp. 2813-2816 ◽  
Author(s):  
P. Ramamurthy ◽  
E. A. Secco
Keyword(s):  
Thermal Analyses ◽  
Decomposition Reaction ◽  
Decomposition Kinetics ◽  
Order Reaction ◽  
First Order ◽  
Calorimetric Measurements ◽  
Bivalent Metals ◽  
Hydroxy Compounds ◽  
Kinetics Of ◽  
Subsequent Decomposition

The thermal analyses of hexahydroxystannates of bivalent metals of the type Me[Sn(OH)6], where Me = Zn, Co, Cu, Ni, Mn, Ca, Mg, Cd, Sr, reveal that the primary mode of decomposition occurs by dehydroxylation and subsequent decomposition of the metastannate residue occurs in the Zn, Cu, Mn, Ca, and Mg compounds. Calorimetric measurements along with related enthalpic values for the decomposition reaction are given. The kinetics of thermal decomposition of all compounds studied, except the Cd and Mg analogues, follow first order reaction kinetics up to α ~ 0.9.

Pyrolysis of methylcyclohexane

1987 ◽  
Vol 52 (6) ◽  
pp. 1527-1544 ◽  
Author(s):  
Ulrika Králíková ◽  
Martin Bajus ◽  
Jozef Baxa
Keyword(s):  
Activation Energy ◽  
Coke Formation ◽  
Tubular Reactor ◽  
Frequency Factor ◽  
Order Reaction ◽  
The Other ◽  
First Order ◽  
Consecutive Reactions ◽  
Secondary Reactions ◽  
Kinetics Of

The kinetics of pyrolysis of methylcyclohexane was investigated from the viewpoint of coke formation in a steel tubular reactor (S/V = 6·65 cm-1) at 0·1 MPa, 700 to 820 °C and residence time 0·01 to 0·24 s. Decomposition of methylcyclohexane proceeds as a first order reaction with a frequency factor 6·31 . 1015 s-1 and activation energy 251·2 kJ mol-1. The course of secondary reactions associated with the formation of coke is discussed. Investigation of coke formation showed a greater tendency of methylcyclohexane to coking in comparison with heptane. A prominent role plays the course of dehydrogenation of cycloalkane radicals up to aromates, this being reflected by the overall conversion of methylcyclohexane, and, on the other hand the thus formed aromates enter the consecutive reactions leading to coke.

scholarly journals Temperature and pH effects on the kinetics of 2-aminophenol auto-oxidation in aqueous solution

2003 ◽  
Vol 1 (3) ◽  
pp. 233-241 ◽  
Author(s):  
Dumitru Oancea ◽  
Mihaela Puiu
Keyword(s):  
Experimental Data ◽  
Activation Energy ◽  
Aqueous Solution ◽  
Ph Effects ◽  
Influence Of Temperature ◽  
First Order ◽  
Incremental Methods ◽  
First Order Kinetics ◽  
Ph Range ◽  
Kinetics Of

AbstractThe kinetics of the auto-oxidation of 2-aminophenol (OAP) to 2-amino-phenoxazin-3-one (APX) was followed in air-saturated aqueous solutions and the influence of temperature and pH on the auto-oxidation rate was studied. The kinetic analysis was based on a spectrophotometric method following the increase of the absorbance of APX. The process follows first order kinetics according to the rate law—d[OAP]/dt=k′[OAP]. The experimental data, within the pH range 4–9.85, were analyzed using both differential and incremental methods. The temperature variation of the overall rate constant was studied at pH=9.85 within the range 25–50°C and the corresponding activation energy was evaluated.

scholarly journals The influence of temperature on the decomposition kinetics of peracetic acid in solutions

2001 ◽  
Vol 18 (2) ◽  
pp. 217-220 ◽  
Author(s):  
L. Kunigk ◽  
D.R. Gomes ◽  
F. Forte ◽  
K.P. Vidal ◽  
L.F. Gomes ◽  
...  
Keyword(s):  
Peracetic Acid ◽  
Decomposition Kinetics ◽  
Influence Of Temperature ◽  
Influence Of Temperature On ◽  
Kinetics Of

Thermal and kinetic behaviors of corn stover and polyethylene in catalytic co-pyrolysis

BioResources ◽  
2018 ◽  
Vol 13 (2) ◽  
pp. 4102-4117
Author(s):  
Shaoqing Wang ◽  
Xiaona Lin ◽  
Zhihe Li ◽  
Weiming Yi ◽  
Xueyuan Bai
Keyword(s):  
Activation Energy ◽  
Corn Stover ◽  
Compensation Effect ◽  
Kinetic Studies ◽  
Order Reaction ◽  
Kinetic Compensation Effect ◽  
Exponential Factor ◽  
First Order ◽  
Thermogravimetric Data ◽  
Kinetics Of

Thermal decomposition characteristics and kinetics of high-density polyethylene (HDPE), corn stover (CS), and their blended mixture (1:1 w/w ratio) during non-catalytic and catalytic co-pyrolysis were studied via thermogravimetric analysis (TGA). The results indicated synergetic interactions between the biomass and the plastics during co-pyrolysis as measured by weight loss (ΔW); this effect was attributed to radical interactions during co-pyrolysis. The pyrolysis catalysts with higher nickel loadings (5%, 10%, and 15%) appreciably diminished the solid residue. Kinetic studies indicated that the pyrolysis was a first-order reaction based on the fitted thermogravimetric data. The activation energy (E) and pre-exponential factor (A) ranged between 26.13 kJ/mol to 392.67 kJ/mol and between 156.24 min-1 to 9.19 x 1023 min-1, respectively. There was a kinetic compensation effect (KCE) observed among the two kinetic parameters. The activation energy (E) decreased for each pyrolysis stage with the presence of a catalyst. The results indicated that catalytic co-pyrolysis could provide great potential for reducing the pyrolysis energy input.

Vulcanization Kinetics of Natural Rubber Coagulated by Microorganisms with Use of a Vulcameter

2010 ◽  
Vol 160-162 ◽  
pp. 1181-1186 ◽  
Author(s):  
Zhi Feng Wang ◽  
Si Dong Li ◽  
Xiao Dong She
Keyword(s):  
Activation Energy ◽  
Natural Rubber ◽  
Rate Constants ◽  
Order Reaction ◽  
First Order Reaction ◽  
First Order ◽  
Second Stage ◽  
End Stage ◽  
Two Stages ◽  
Kinetics Of

Kinetics of vulcanization of natural rubber coagulated by microorganisms (NR-m) was studied with the use of a vulcameter. In the induction period of vulcanization, the time t0 of NR-m is shorter than that of natural rubber coagulated by acid (NR-a), and the rate constant k1/a of NR-m are greater than that of NR-a. Both the curing periods of NR-m and NR-a consist of two stages. The first stage follows first-order reaction. The rate constants k2 of NR-m in the first stage are greater than that of NR-a at the same temperature, and so are the activation energy E2. The second stage (end stage of the curing period) does not follow first-order reaction, and the calculated reaction order n of NR-m is in the range of 0.82-0.85, and that of NR-a is in the range of 0.64-0.72. The rate constants k3 of the second stage for NR -m are greater than that of NR-a at the same temperature, and so is the activation energy E3.

The Kinetics of Glucose Decomposition with Sulfate Reduction in the Anaerobic Fluidized Bed Reactor

1993 ◽  
Vol 28 (2) ◽  
pp. 135-144 ◽  
Author(s):  
S. Matsui ◽  
R. Ikemoto Yamamoto ◽  
Y. Tsuchiya ◽  
B. Inanc
Keyword(s):  
Sulfate Reduction ◽  
Fluidized Bed ◽  
Kinetic Equations ◽  
Fluidized Bed Reactor ◽  
Order Reaction ◽  
First Order Reaction ◽  
First Order ◽  
Glucose Decomposition ◽  
Reaction Equations ◽  
Kinetics Of

Using a fluidized bed reactor, experiments on glucose decomposition with and without sulfate reduction were conducted. Glucose in the reactor was mainly decomposed into lactate and ethanol. Lactate was mainly decomposed into propionate and acetate, while ethanol was decomposed into propionate, acetate, and hydrogen. Sulfate reduction was not involved in the decomposition of glucose, lactate, and ethanol, but was related to propionate and acetate decomposition. The stepwise reactions were modeled using either a Monod expression or first order reaction kinetics in respect to the reactions. The coefficients of the kinetic equations were determined experimentally. The modified Monod and first order reaction equations were effective at predicting concentrations of glucose, lactate, ethanol, propionate, acetate, and sulfate along the beight of the reactor. With sulfate reduction, propionate was decomposed into acetate, while without sulfate reduction, accumulation of propionate was observed in the reactor. Sulfate reduction accelerated propionate conversion into acetate by decreasing the hydrogen concentration.

Kinetics and Mechanism of Hexachloroiridate(IV) Oxidation of Arsenic(III) in Acidic Perchlorate Solutions

1992 ◽  
Vol 57 (7) ◽  
pp. 1451-1458 ◽  
Author(s):  
Refat M. Hassan
Keyword(s):  
Ionic Strength ◽  
Fractional Order ◽  
Activation Parameters ◽  
Order Reaction ◽  
First Order Reaction ◽  
Intermediate Complex ◽  
Constant Ionic Strength ◽  
Kinetics Of Oxidation ◽  
First Order ◽  
Kinetics Of

The kinetics of oxidation of arsenic(III) by hexachloroiridate(IV) at lower acid concentrations and at constant ionic strength of 1.0 mol dm-3 have been investigated spectrophotometrically. A first-order reaction in [IrCl62-] and fractional order with respect to arsenic(III) have been observed. A kinetic evidence for the formation of an intermediate complex between the hydrolyzed arsenic(III) species and the oxidant was presented. The results showed that decreasing the [H+] is accompanied by an appreciable acceleration of the rate of oxidation. The activation parameters have been evaluated and a mechanism consistent with the kinetic results was suggested.

Sign in / Sign up

Export Citation Format

Share Document