scholarly journals Monitoring the stability of fortified cold-pressed sunflower oil under different storage conditions

10.5219/1348 ◽  
2020 ◽  
Vol 14 ◽  
pp. 887-892
Author(s):  
Dani Dordevic ◽  
Simona Jancikova ◽  
Alexandra Lankovova ◽  
Bohuslava Tremlova
Keyword(s):  
Product Development ◽  
Peroxide Value ◽  
Sunflower Oil ◽  
Oxidation Stability ◽  
Storage Conditions ◽  
Human Consumption ◽  
Primary Products ◽  
Oil Mixtures ◽  
The Stability ◽  
Cold Pressed

The aim of the study was to evaluate the stability of cold-pressed sunflower oil mixed with different seeds and herb. The seeds and herb were added at 1% and 5% concentrations; samples were divided into 2 groups: stored in the dark and light. The primary products of oxidation and chlorophyll content were monitored during 3 months of storage. The results showed very low oxidation stability of experimentally produced cold-pressed oil mixtures/dressings, especially during storage on the light. The samples with 5% of hemp herb addition showed the best stability since they have peroxide value under 20 mekv O2.kg-1, both in the dark and on the light. Other samples, both stored in the dark and on light, were declared as not for human consumption due to high oxidative product development. The research represents an important storability evaluation of products that can be found on the market and that can be found very attractive for consumers.

Stability of Grape Seed Oil and its Antioxidant Tocotrienols

2014 ◽  
Vol 1030-1032 ◽  
pp. 370-373 ◽  
Author(s):  
Jaromír Lachman ◽  
Alena Hejtmánková ◽  
Zora Kotíková ◽  
Martin Dědina ◽  
Radomíra Střalková ◽  
...  
Keyword(s):  
Peroxide Value ◽  
Room Temperature ◽  
Seed Oil ◽  
Grape Seed ◽  
Storage Conditions ◽  
Oxidation Products ◽  
Light Conditions ◽  
Grape Seed Oil ◽  
The Stability ◽  
Primary Oxidation

For the experiment three different storage conditions were chosen: storage at room temperature of 22 °C in the light and in the dark and in the dark in a refrigerator at 4 °C. Parameters monitored were: peroxide value and changes in the content of α-, γ-and δ-tocotrienols and α - and γ-tocopherols during storage for 210 days (30 weeks). The peroxide value is an indicator of the content of primary oxidation products of oils. From analytical analyses results that the greatest destruction of grape oil occurs during storage at room temperature and access of light, where a peroxide value increased up to 484 meq. O2/kg oil). The least intrusive method of storage was in terms of temperature refrigerator (4 °C) in the dark, when during 30 days of storage peroxide value had risen only to 71.9 meq. O2/kg oil. Between these values ​​were values stored at room temperature in the dark (after 30 weeks storage 196 meq. O2/kg oil). From these parameters is clearly showed that to the stability of oil contribute significantly both factors - temperature and light conditions. The same trend was also found in tocotrienols. At room temperature and access of light was complete decomposition of α-tocotrienol in the 9th week of storage, γ-tocotrienol at 30 weeks of storage and δ-tocotrienol in the 18th week of storage. The most stable seems γ-tocotrienol > δ-tocotrienol > α-tocotrienol. When stored in the refrigerator in the dark, there was practically no decomposition of α-, γ-and δ-tocotrienols whose contents remained completely unchanged.

scholarly journals Assessment of the Properties of Rapeseed Oil Enriched with Oils Characterized by High Content of α-linolenic Acid

2019 ◽  
Vol 11 (20) ◽  
pp. 5638 ◽  
Author(s):  
Agnieszka Sagan ◽  
Agata Blicharz-Kania ◽  
Marek Szmigielski ◽  
Dariusz Andrejko ◽  
Paweł Sobczak ◽  
...  
Keyword(s):  
Erucic Acid ◽  
Oxidative Stability ◽  
Linolenic Acid ◽  
Peroxide Value ◽  
Rapeseed Oil ◽  
Raw Materials ◽  
Acid Value ◽  
Oil Mixtures ◽  
Lower Ratio ◽  
Cold Pressed

Functional foods include cold-pressed oils, which are a rich source of antioxidants and bioactive n-3 and n-6 polyunsaturated fatty acids. The aim of this study was to assess the quality of rapeseed oils supplemented with Spanish sage and cress oils. Seven oil mixtures consisting of 70% of rapeseed oil and 30% of sage and/or cress oil were prepared for the analyses. The oil mixtures were analyzed to determine their acid value, peroxide value, oxidative stability, and fatty acid composition. In terms of the acid value and the peroxide value, all mixtures met the requirements for cold-pressed vegetable oils. The enrichment of the rapeseed oil with α-linolenic acid-rich fats resulted in a substantially lower ratio of n-6 to n-3 acids in the mixtures than in the rapeseed oil. The mixture of the rapeseed oil with the sage and cress oils in a ratio of 70:10:20 exhibited higher oxidative stability than the raw materials used for enrichment and a nearly 20% α-linolenic acid content. The oils proposed in this study can improve the ratio of n-6:n-3 acids in modern diets. Additionally, mixing the cress seed oils with rapeseed oil and chia oil resulted in a reduction in the content of erucic acid in the finished product. This finding indicates that cress seeds, despite their high content of erucic acid, can be used as food components. The production of products with a positive effect on human health is one of the most important factors in the sustainable development of agriculture.

Evaluation of Microbial Load from Canned Soya Milk Drinks in Malaysia

2016 ◽  
Vol 2 (1) ◽  
pp. 22-25
Author(s):  
Nur Amalina binti Mustafa ◽  
Muhammad Ashraf bin Redzuan ◽  
Muhamad Hazim bin Zuraimi ◽  
Muhamad Shuhaimi bin Shuib ◽  
Shahnaz Majeed ◽  
...  
Keyword(s):  
Culture Media ◽  
Storage Condition ◽  
Storage Conditions ◽  
Nutrient Agar ◽  
Microbial Load ◽  
Blood Agar ◽  
Human Consumption ◽  
Processing Unit ◽  
Soya Milk ◽  
Two Samples

Objective: Owing to the habit of consuming ready food among the citizens of Malaysia a study was conducted to evaluate 20 samples of canned soya milk for the presence of possible microbial content. The samples were collected randomly from shopping malls, restaurants and kiosk in Ipoh Malaysia. Methods: All samples collected across Ipoh, were subjected to test for presence bacteria in nutrient agar, blood agar and macConkey media. The possible microbial load was swapped from surface and soya milk content with a sterile cotton and streaked on nutrient agar, blood agar and macConkey culture media. The streaked petri plates were incubated for 48 hours at 37oC. Results: The study revealed negative microbial growth in all except two samples from the surface and soya milk content collected from a restaurant in nutrient agar and blood agar medium. The presence of microbes was conformed as gram positive staphylococcus sp. through gram staining. The positive growth may be imputed to poor storage condition at the restaurant. Conclusion: It can be computed from the study that the majority of the samples were free from bacterial growth, suggesting strong in house quality control mechanism at the processing unit and exquisite storage conditions in malls and kiosk suggesting that soya milk available in malls and kiosk are fit for human consumption.

FORMULATION AND DEVELOPMENT OF FAST DISSOLVING TABLET OF METOCLOPRAMIDE: AN ANTI-EMETIC DRUG

2019 ◽  
Vol 8 (6) ◽  
Author(s):  
Avilash Carpenter ◽  
M.K. Gupta ◽  
Neetesh Kumar Jain ◽  
Urvashi Sharma ◽  
Rahul Sisodiya
Keyword(s):  
Mechanical Strength ◽  
Standard Procedure ◽  
Flow Property ◽  
Storage Conditions ◽  
Angle Of Repose ◽  
Dissolution Time ◽  
Disintegration Time ◽  
Powder Blend ◽  
Standard Curve ◽  
The Stability

Aim: The main of the study is to formulate and develop orally disintegrating fast dissolving tablet of Metoclopramide hydrochloride. Material & Methods: Before formulation and development of selected drug, the standard curve in buffer was prepared and absorbance at selected maxima was taken. Then two different disintegrating agents were selected and drug was mixed with disintegrating agents in different ratio. Various Preformulation parameters and evaluation of tablet i.e. disintegration time, dissolution time, friability, hardness, thickness were measured by standard procedure. Result & Discussion: The angle of repose for all the batches prepared. The values were found to be in the range of 30.46 to 36.45, which indicates good flow property for the powder blend according to the USP. The bulk density and tapped density for all the batches varied from 0.49 to 0.54 g/mL and 0.66 to 0.73, respectively. Carr’s index values were found to be in the range of 23.33 to 25.88, which is satisfactory for the powders as well as implies that the blends have good compressibility. Hausner ratio values obtained were in the range of 1.22 to 1.36, which shows a passable flow property for the powder blend based on the USP. The results for tablet thickness and height for all batches was found to range from 4.45 to 4.72 mm and 3.67 to 3.69 mm, respectively. Hardness or breaking force of tablets for all batches was found to range from 32.8 to 36.2 N. Tablet formulations must show good mechanical strength with sufficient hardness in order to handle shipping and transportation. Friability values for all the formulations were found to be in the range of 0.22 % to 0.30 %. Conclusion: Orally disintegrating tablets were compressed in order to have sufficient mechanical strength and integrity to withstand handling, shipping and transportation. The formulation was shown to have a rapid disintegration time that complied with the USP (less than one minute). The data obtained from the stability studies indicated that the orally disintegrating mini-tablets of MTH were stable under different environmental storage conditions. Keywords: Formulation & Development, Fast Dissolving Tablet, Metoclopramide, Anti-Emetic Drug, Oral Disintegrating Tablet

scholarly journals The Effects of Storage Conditions on the Stability of House Dust Mite Extracts

2013 ◽  
Vol 5 (6) ◽  
pp. 397 ◽  
Author(s):  
Kyoung Yong Jeong ◽  
Soo-Young Choi ◽  
In-Soo Han ◽  
Jae-Hyun Lee ◽  
Joo-Shil Lee ◽  
...  
Keyword(s):  
House Dust ◽  
House Dust Mite ◽  
Storage Conditions ◽  
Dust Mite ◽  
The Stability

scholarly journals Insufficient Stability of Clavulanic Acid in Widely Used Child-Appropriate Formulations

Antibiotics ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 225
Author(s):  
Ines Mack ◽  
Mike Sharland ◽  
Janneke M. Brussee ◽  
Sophia Rehm ◽  
Katharina Rentsch ◽  
...  
Keyword(s):  
Ambient Temperature ◽  
Clavulanic Acid ◽  
Storage Conditions ◽  
Essential Medicines ◽  
Active Components ◽  
Middle Income ◽  
Ambient Temperatures ◽  
Essential Medicines List ◽  
Dispersible Tablets ◽  
The Stability

Amoxicillin-clavulanic acid (AMC) belongs to the WHO Essential Medicines List for children, but for optimal antimicrobial effectiveness, reconstituted dry powder suspensions need to be stored in a refrigerated environment. Many patients in low- and middle-income countries who are sold AMC suspensions would be expected not to keep to the specified storage conditions. We aimed to assess the stability of both ingredients in liquid formulations and dispersible tablets, combined with nationally representative data on access to appropriate storage. Degradation of amoxicillin (AMX) and clavulanic-acid (CLA) was measured in suspensions and dispersible tablets commercially available in Switzerland at different ambient temperatures (8 °C vs. 28 °C over 7 days, and 23 °C vs. 28 °C over 24 h, respectively). Data on access to refrigeration and electricity were assessed from the USAID-funded Demographic and Health Survey program. In suspensions, CLA degraded to a maximum of 12.9% (95% CI −55.7%, +29.9%) at 8°C and 72.3% (95% CI −82.8%, −61.8%) at a 28 °C ambient temperature during an observation period of 7 days. Dispersible tablets were observed during 24 h and CLA degraded to 15.4% (95% CI −51.9%, +21.2%) at 23 °C and 21.7% (−28.2%, −15.1%) at a 28 °C ambient temperature. There is relevant degradation of CLA in suspensions during a 7-day course. To overcome the stability challenges for all active components, durable child-appropriate formulations are needed. Until then, prescribers of AMC suspensions or pharmacists who sell the drug need to create awareness for the importance of proper storage conditions regarding effectiveness of both antibiotics and this recommendation should be reflected in the WHO Essential Medicines List for children.

Effect of pH and temperature on the infectivity of human coronavirus 229E

1989 ◽  
Vol 35 (10) ◽  
pp. 972-974 ◽  
Author(s):  
Alain Lamarre ◽  
Pierre J. Talbot
Keyword(s):  
Incubation Period ◽  
Storage Conditions ◽  
Viral Infectivity ◽  
Human Coronavirus ◽  
Virus Growth ◽  
The Stability ◽  
And Storage ◽  
Influence Of Ph ◽  
Human Coronavirus 229E

The stability of human coronavirus 229E infectivity was maximum at pH 6.0 when incubated at either 4 or 33 °C. However, the influence of pH was more pronounced at 33 °C. Viral infectivity was completely lost after a 14-day incubation period at 22, 33, or 37 °C but remained relatively constant at 4 °C for the same length of time. Finally, the infectious titer did not show any significant reduction when subjected to 25 cycles of thawing and freezing. These studies will contribute to optimize virus growth and storage conditions, which will facilitate the molecular characterization of this important pathogen.Key words: coronavirus, pH, temperature, infectivity, human coronavirus.

scholarly journals Pre-Drawn Syringes of Comirnaty for an Efficient COVID-19 Mass Vaccination: Demonstration of Stability

Pharmaceutics ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 1029
Author(s):  
Francesca Selmin ◽  
Umberto M. Musazzi ◽  
Silvia Franzè ◽  
Edoardo Scarpa ◽  
Loris Rizzello ◽  
...  
Keyword(s):  
Mechanical Stress ◽  
Real Life ◽  
Storage Conditions ◽  
Lipid Nanoparticles ◽  
Mass Vaccination ◽  
Hydrodynamic Diameter ◽  
The Us ◽  
Real Mass ◽  
The Stability ◽  
And Storage

Moving towards a real mass vaccination in the context of COVID-19, healthcare professionals are required to face some criticisms due to limited data on the stability of a mRNA-based vaccine (Pfizer-BioNTech COVID-19 Vaccine in the US or Comirnaty in EU) as a dose in a 1 mL-syringe. The stability of the lipid nanoparticles and the encapsulated mRNA was evaluated in a “real-life” scenario. Specifically, we investigated the effects of different storing materials (e.g., syringes vs. glass vials), as well as of temperature and mechanical stress on nucleic acid integrity, number, and particle size distribution of lipid nanoparticles. After 5 h in the syringe, lipid nanoparticles maintained the regular round shape, and the hydrodynamic diameter ranged between 80 and 100 nm with a relatively narrow polydispersity (<0.2). Samples were stable independently of syringe materials and storage conditions. Only strong mechanical stress (e.g., shaking) caused massive aggregation of lipid nanoparticles and mRNA degradation. These proof-of-concept experiments support the hypothesis that vaccine doses can be safely prepared in a dedicated area using an aseptic technique and transferred without affecting their stability.

THE DEVELOPMENT OF A METHOD FOR DIRECT MASS SPECTROMETRIC ANALYSIS OF BIOLOGICAL SAMPLES USING POROUS SAMPLERS

2021 ◽  
Vol 55 (1) ◽  
pp. 99-103
Author(s):  
R.E. Levin ◽  
◽  
M.A. Shamraeva ◽  
I.M. Larina ◽  
D.S. Bormotov ◽  
...  
Keyword(s):  
Biological Samples ◽  
Biological Fluids ◽  
Storage Conditions ◽  
Spectrometric Analysis ◽  
Sample Collection ◽  
Mucous Membranes ◽  
The Status ◽  
Direct Mass Spectrometry ◽  
The Stability ◽  
Blood Spot

The paper presents a method for rapid multi-omics investigation of biological samples using polypropylene bulk porous samplers. The use of porous samplers makes it easy to collect samples from the surface of the skin, mucous membranes, and biological fluids even in a field, and the surfaces of wounds and injuries. Collected samples do not require special storage conditions, and the samplers are lightweight and very compact. They can be used to monitor the condition of cosmonauts before, during, and after the spaceflight with the same sample collection method. The analysis of biomaterial applied to the sampler is performed using direct mass spectrometry methods, similar to the dried blood spot technique that is already used in clinical practice. However, bulk porous samplers allow expanding the range of analytes ionization conditions, which increases the stability and reliability of the ionization process, which expands the variety of analyzed molecules. The proposed method can be used to study compounds of various classes, including proteins, lipids, and metabolites, to systematically monitor the status of people in extreme conditions (athletes, astronauts), or to study the condition of patients in the clinic.

scholarly journals Effect of storage conditions on the stability of recombinant human MCP-1/CCL2

Biologicals ◽  
2011 ◽  
Vol 39 (1) ◽  
pp. 29-32 ◽  
Author(s):  
Krisada Leemasawatdigul ◽  
Heather Gappa-Fahlenkamp
Keyword(s):  
Storage Conditions ◽  
The Stability
Sign in / Sign up

Export Citation Format

Share Document