scholarly journals Incorporating remote sensing ET into Community Land Model version 4.5

2017 ◽  
Author(s):  
Dagang Wang ◽  
Guiling Wang ◽  
Dana T. Parr ◽  
Weilin Liao ◽  
Youlong Xia ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Land Surface ◽  
Correction Method ◽  
Energy Budgets ◽  
Land Surface Models ◽  
Community Land Model ◽  
Model Version ◽  
Surface Models ◽  
Time Invariant ◽  
The Relationship

Abstract. Land surface models bear substantial biases in simulating surface water and energy budgets despite of the continuous development and improvement of model parameterizations. To reduce model biases, Parr et al. (2015) proposed a method incorporating satellite-based evapotranspiration (ET) products into land surface models. Here we apply this method to the Community Land Model version 4.5 (CLM4.5) and test its performance over the conterminous US (CONUS). We first calibrate a relationship between the observational ET from the Global Land Evaporation Amsterdam Model (GLEAM) product and the model ET from CLM4.5, and assume that this relationship holds beyond the calibration period. During the validation or application period, a simulation using the default CLM4.5 (CLM) is conducted first, and its output is combined with the calibrated observational-vs-model ET relationship to derive a corrected ET; an experiment (CLMET) is then conducted in which the model-generated ET is overwritten using the corrected ET. Using the observations of ET, runoff, and soil moisture content as benchmarks, we demonstrate that CLMET greatly reduces the biases existing in CLM. The improvement differs with region, being more significant in eastern CONUS than western CONUS, with the most striking improvement over the southeast CONUS. This regional dependence reflects primarily the regional dependence in the degree to which the relationship between observational and model ET remains time-invariant (a fundamental hypothesis of the Parr et al. method). The bias correction method provides an alternative way to improve the performance of land surface models, which could lead to more realistic drought evaluations with improved ET and soil moisture estimates.

scholarly journals Incorporating remote sensing-based ET estimates into the Community Land Model version 4.5

2017 ◽  
Vol 21 (7) ◽  
pp. 3557-3577 ◽  
Author(s):  
Dagang Wang ◽  
Guiling Wang ◽  
Dana T. Parr ◽  
Weilin Liao ◽  
Youlong Xia ◽  
...  
Keyword(s):  
Bias Correction ◽  
Land Surface ◽  
Correction Method ◽  
Limiting Factor ◽  
Development Effort ◽  
Land Surface Models ◽  
Community Land Model ◽  
Bias Correction Method ◽  
Model Version ◽  
Surface Models

Abstract. Land surface models bear substantial biases in simulating surface water and energy budgets despite the continuous development and improvement of model parameterizations. To reduce model biases, Parr et al. (2015) proposed a method incorporating satellite-based evapotranspiration (ET) products into land surface models. Here we apply this bias correction method to the Community Land Model version 4.5 (CLM4.5) and test its performance over the conterminous US (CONUS). We first calibrate a relationship between the observational ET from the Global Land Evaporation Amsterdam Model (GLEAM) product and the model ET from CLM4.5, and assume that this relationship holds beyond the calibration period. During the validation or application period, a simulation using the default CLM4.5 (CLM) is conducted first, and its output is combined with the calibrated observational-vs.-model ET relationship to derive a corrected ET; an experiment (CLMET) is then conducted in which the model-generated ET is overwritten with the corrected ET. Using the observations of ET, runoff, and soil moisture content as benchmarks, we demonstrate that CLMET greatly improves the hydrological simulations over most of the CONUS, and the improvement is stronger in the eastern CONUS than the western CONUS and is strongest over the Southeast CONUS. For any specific region, the degree of the improvement depends on whether the relationship between observational and model ET remains time-invariant (a fundamental hypothesis of the Parr et al. (2015) method) and whether water is the limiting factor in places where ET is underestimated. While the bias correction method improves hydrological estimates without improving the physical parameterization of land surface models, results from this study do provide guidance for physically based model development effort.

scholarly journals Evaluating the value of a network of cosmic-ray probes for improving land surface modelling

2016 ◽  
Author(s):  
R. Baatz ◽  
Harrie-Jan Hendricks Franssen ◽  
Xujun Han ◽  
Tim Hoar ◽  
Heye R. Bogena ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Land Surface ◽  
Cosmic Ray ◽  
Land Surface Models ◽  
Lower Boundary Condition ◽  
Soil Map ◽  
Community Land Model ◽  
Verification Period ◽  
Surface Models ◽  
Soil Hydraulic

Abstract. Land surface models can model matter and energy fluxes between the land surface and atmosphere, and provide a lower boundary condition to atmospheric circulation models. For these applications, accurate soil moisture quantification is highly desirable but not always possible given limited observations and limited subsurface data accuracy. Cosmic-ray probes (CRPs) offer an interesting alternative to indirectly measure soil moisture and provide an observation that can be assimilated into land surface models for improved soil moisture prediction. Synthetic studies have shown the potential to estimate subsurface parameters of land surface models with the assimilation of CRP observations. In this study, the potential of a network of CRPs for estimating subsurface parameters and improved soil moisture states is tested in a real-world case scenario using the local ensemble transform Kalman filter with the Community Land Model. The potential of the CRP network was tested by assimilating CRP-data for the years 2011 and 2012 (with or without soil hydraulic parameter estimation), followed by the verification year 2013. This was done using (i) the regional soil map as input information for the simulations, and (ii) an erroneous, biased soil map. For the regional soil map, soil moisture characterization was only improved in the assimilation period but not in the verification period. For the biased soil map, soil moisture characterization improved in both periods strongly from a ERMS of 0.11 cm3/cm3 to 0.03 cm3/cm3 (assimilation period) and from 0.12 cm3/cm3 to 0.05 cm3/cm3 (verification period) and the estimated soil hydraulic parameters were after assimilation closer to the ones of the regional soil map. Finally, the value of the CRP network was also evaluated with jackknifing data assimilation experiments. It was found that the CRP network is able to improve soil moisture estimates at locations between the assimilation sites from a ERMS of 0.12 cm3/cm3 to 0.06 cm3/cm3 (verification period), but again only if the initial soil map was biased.

scholarly journals Coupling the Community Land Model version 5.0 to the parallel data assimilation framework PDAF: Description and applications

2021 ◽  
Author(s):  
Lukas Strebel ◽  
Heye Bogena ◽  
Harry Vereecken ◽  
Harrie-Jan Hendricks Franssen
Keyword(s):  
Data Assimilation ◽  
Water Content ◽  
Soil Water ◽  
Soil Water Content ◽  
Land Surface ◽  
Land Surface Models ◽  
Community Land Model ◽  
Model Version ◽  
Parallel Data ◽  
Surface Models

Abstract. Land surface models are important for improving our understanding of the earth system. They are continuously improving and becoming more accurate in describing the varied surface processes, e.g. the Community Land Model version 5 (CLM5). Similarly, observational networks and remote sensing operations are increasingly providing more and higher quality data. For the optimal combination of land surface models and observation data, data assimilation techniques have been developed in the past decades that incorporate observations to update modeled states and parameters. The Parallel Data Assimilation Framework (PDAF) is a software environment that enables ensemble data assimilation and simplifies the implementation of data assimilation systems in numerical models. In this paper, we present the further development of the PDAF to enable its application in combination with CLM5. This novel coupling adapts the optional CLM5 ensemble mode to enable integration of PDAF filter routines while keeping changes to the pre-existing parallel communication infrastructure to a minimum. Soil water content observations from an extensive in-situ measurement network in the Wüstebach catchment in Germany are used to illustrate the application of the coupled CLM5+PDAF system. The results show overall reductions in root mean square error of soil water content from 7 % up to 35 % compared to simulations without data assimilation. We expect the coupled CLM5+PDAF system to provide a basis for improved regional to global land surface modelling by enabling the assimilation of globally available observational data.

scholarly journals The Use of Remote Sensing-Based ET Estimates to Improve Global Hydrological Simulations in the Community Land Model Version 5.0

2021 ◽  
Vol 13 (21) ◽  
pp. 4460
Author(s):  
Dayang Wang ◽  
Dagang Wang ◽  
Chongxun Mo
Keyword(s):  
Remote Sensing ◽  
Water Supply ◽  
Bias Correction ◽  
Land Surface ◽  
Land Surface Models ◽  
Community Land Model ◽  
Model Version ◽  
Correction Effect ◽  
Surface Models ◽  
Global Land

Terrestrial evapotranspiration (ET) is a critical component of water and energy cycles, and improving global land evapotranspiration is one of the challenging works in the development of land surface models (LSMs). In this study, we apply a bias correction approach into the Community Land Model version 5.0 (CLM5) globally by utilizing the remote sensing-based ET dataset. Results reveal that the correction approach can alleviate both overestimation and underestimation of ET by CLM5 over the globe. The adjustment to overestimation is generally effective, whereas the effectiveness for underestimation is determined by the ET regime, namely water-limited or energy-limited. In the areas with abundant precipitation, the underestimation is effectively corrected by increasing ET without the water supply limit. In areas with rare precipitation, however, increasing ET is limited by water supply, which leads to an undesirable correction effect. Compared with the ET simulated by CLM5, the bias correction approach can reduce the global-averaged relative bias (RB) and the root mean square error (RMSE) by 51.8% and 65.9% against Global Land Evaporation Amsterdam Model (GLEAM) ET data, respectively. Meanwhile, the correlation coefficient (CC) can also be improved from 0.93 to 0.98. Continentally, the most substantial ET improvement occurs in Asia, with the RB and RMSE decreased by 69.7% (from 7.04% to 2.14%) and 70.2% (from 0.312 mm day−1 to 0.093 mm day−1, equivalent to from 114 mm year−1 to 34 mm year−1), and the CC increased from 0.92 to 0.99, respectively. Consequently, benefiting from the improvement of ET, the simulations of runoff and soil moisture are also improved over the globe and each of the six continents, and the improvement varies with region. This study demonstrates that the use of satellite-based ET products is beneficial to hydrological simulations in land surface models over the globe.

scholarly journals Using satellite-based estimates of evapotranspiration and groundwater changes to determine anthropogenic water fluxes in land surface models

2015 ◽  
Vol 8 (10) ◽  
pp. 3021-3031 ◽  
Author(s):  
R. G. Anderson ◽  
M.-H. Lo ◽  
S. Swenson ◽  
J. S. Famiglietti ◽  
Q. Tang ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Land Surface ◽  
Climate Models ◽  
Management Practice ◽  
Water Volume ◽  
Land Surface Models ◽  
Community Land Model ◽  
Irrigation Intensity ◽  
Surface Models ◽  
Data Latency

Abstract. Irrigation is a widely used water management practice that is often poorly parameterized in land surface and climate models. Previous studies have addressed this issue via use of irrigation area, applied water inventory data, or soil moisture content. These approaches have a variety of drawbacks including data latency, accurately prescribing irrigation intensity, and a lack of conservation of water volume for models using a prescribed soil moisture approach. In this study, we parameterize irrigation fluxes using satellite observations of evapotranspiration (ET) compared to ET from a suite of land surface models without irrigation. We then incorporate the irrigation flux into the Community Land Model (CLM) and use a systematic trial-and-error procedure to determine the ground- and surface-water withdrawals that are necessary to balance the new irrigation flux. The resulting CLM simulation with irrigation produces ET that matches the magnitude and seasonality of observed satellite ET well, with a mean difference of 6.3 mm month−1 and a correlation of 0.95. Differences between the new CLM ET values and satellite-observed ET values are always less than 30 mm month−1 and the differences show no pattern with respect to seasonality. The results reinforce the importance of accurately parameterizing anthropogenic hydrologic fluxes into land surface and climate models to assess environmental change under current and future climates and land management regimes.

scholarly journals State and parameter estimation of two land surface models using the ensemble Kalman filter and the particle filter

2017 ◽  
Vol 21 (9) ◽  
pp. 4927-4958 ◽  
Author(s):  
Hongjuan Zhang ◽  
Harrie-Jan Hendricks Franssen ◽  
Xujun Han ◽  
Jasper A. Vrugt ◽  
Harry Vereecken
Keyword(s):  
Soil Moisture ◽  
Data Assimilation ◽  
Land Surface ◽  
Model Parameters ◽  
Land Surface Models ◽  
Evaluation Period ◽  
Community Land Model ◽  
Surface Models ◽  
State Augmentation ◽  
Dual Estimation

Abstract. Land surface models (LSMs) use a large cohort of parameters and state variables to simulate the water and energy balance at the soil–atmosphere interface. Many of these model parameters cannot be measured directly in the field, and require calibration against measured fluxes of carbon dioxide, sensible and/or latent heat, and/or observations of the thermal and/or moisture state of the soil. Here, we evaluate the usefulness and applicability of four different data assimilation methods for joint parameter and state estimation of the Variable Infiltration Capacity Model (VIC-3L) and the Community Land Model (CLM) using a 5-month calibration (assimilation) period (March–July 2012) of areal-averaged SPADE soil moisture measurements at 5, 20, and 50 cm depths in the Rollesbroich experimental test site in the Eifel mountain range in western Germany. We used the EnKF with state augmentation or dual estimation, respectively, and the residual resampling PF with a simple, statistically deficient, or more sophisticated, MCMC-based parameter resampling method. The performance of the calibrated LSM models was investigated using SPADE water content measurements of a 5-month evaluation period (August–December 2012). As expected, all DA methods enhance the ability of the VIC and CLM models to describe spatiotemporal patterns of moisture storage within the vadose zone of the Rollesbroich site, particularly if the maximum baseflow velocity (VIC) or fractions of sand, clay, and organic matter of each layer (CLM) are estimated jointly with the model states of each soil layer. The differences between the soil moisture simulations of VIC-3L and CLM are much larger than the discrepancies among the four data assimilation methods. The EnKF with state augmentation or dual estimation yields the best performance of VIC-3L and CLM during the calibration and evaluation period, yet results are in close agreement with the PF using MCMC resampling. Overall, CLM demonstrated the best performance for the Rollesbroich site. The large systematic underestimation of water storage at 50 cm depth by VIC-3L during the first few months of the evaluation period questions, in part, the validity of its fixed water table depth at the bottom of the modeled soil domain.

scholarly journals Using satellite-based estimates of evapotranspiration and groundwater changes to determine anthropogenic water fluxes in land surface models

2015 ◽  
Vol 8 (4) ◽  
pp. 3565-3592 ◽  
Author(s):  
R. G. Anderson ◽  
M.-H. Lo ◽  
S. Swenson ◽  
J. S. Famiglietti ◽  
Q. Tang ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Land Surface ◽  
Climate Models ◽  
Management Practice ◽  
Water Flux ◽  
Water Volume ◽  
Land Surface Models ◽  
Community Land Model ◽  
Irrigation Intensity ◽  
Surface Models

Abstract. Irrigation is a widely used water management practice that is often poorly parameterized in land surface and climate models. Previous studies have addressed this issue via use of irrigation area, applied water inventory data, or soil moisture content. These approaches have a variety of drawbacks including data latency, accurately prescribing irrigation intensity, and conservation of water volume for soil moisture approach. In this study, we parameterize irrigation fluxes using satellite observations of evapotranspiration (ET) against ET from a suite of land surface models without irrigation. We then apply this water flux into the Community Land Model (CLM) and use an iterative approach to estimate groundwater recharge and partition the water flux between groundwater and surface water. The ET simulated by CLM with irrigation matches the magnitude and seasonality of observed satellite ET well, with a mean difference of 6.3 mm month−1 and a correlation of 0.95. Differences between the new CLM ET values and observed ET values are always less than 30 mm month−1 and the differences show no pattern with respect to seasonality. The results reinforce the importance of accurately parameterizing anthropogenic hydrologic fluxes into land surface and climate models to assess environmental change under current and future climates and land management regimes.

scholarly journals Modeled Land Atmosphere Coupling Response to Soil Moisture Changes with Different Generations of Land Surface Models

Water ◽  
2019 ◽  
Vol 12 (1) ◽  
pp. 46 ◽  
Author(s):  
Prabhakar Shrestha ◽  
Clemens Simmer
Keyword(s):  
Soil Moisture ◽  
Surface Energy ◽  
Energy Flux ◽  
Land Surface ◽  
Small Scale ◽  
Land Surface Models ◽  
Surface Energy Flux ◽  
Community Land Model ◽  
Flux Partitioning ◽  
Surface Models

An idealized study with two land surface models (LSMs): TERRA-Multi Layer (TERRA-ML) and Community Land Model (CLM) alternatively coupled to the same atmospheric model COSMO (Consortium for Small-Scale Modeling), reveals differences in the response of the LSMs to initial soil moisture. The bulk parameterization of evapotranspiration pathways, which depends on the integrated soil moisture of active layers rather than on each discrete layer, results in a weaker response of the surface energy flux partitioning to changes in soil moisture for TERRA-ML, as compared to CLM. The difference in the resulting surface energy flux partitioning also significantly affects the model response in terms of the state of the atmospheric boundary layer. For vegetated land surfaces, both models behave quite differently for drier regimes. However, deeper reaching root fractions in CLM align both model responses with each other. In general, differences in the parameterization of the available root zone soil moisture, evapotranspiration pathways, and the soil-vegetation structure in the two LSMs are mainly responsible for the diverging tendencies of the simulated land atmosphere coupling responses.

scholarly journals On the utility of land surface models for agricultural drought monitoring

2012 ◽  
Vol 16 (9) ◽  
pp. 3451-3460 ◽  
Author(s):  
W. T. Crow ◽  
S. V. Kumar ◽  
J. D. Bolten
Keyword(s):  
Soil Moisture ◽  
Land Surface ◽  
Cross Correlation ◽  
Root Zone ◽  
Vegetation Indices ◽  
Agricultural Drought ◽  
Drought Monitoring ◽  
Global Evaluation ◽  
Land Surface Models ◽  
Surface Models

Abstract. The lagged rank cross-correlation between model-derived root-zone soil moisture estimates and remotely sensed vegetation indices (VI) is examined between January 2000 and December 2010 to quantify the skill of various soil moisture models for agricultural drought monitoring. Examined modeling strategies range from a simple antecedent precipitation index to the application of modern land surface models (LSMs) based on complex water and energy balance formulations. A quasi-global evaluation of lagged VI/soil moisture cross-correlation suggests, when globally averaged across the entire annual cycle, soil moisture estimates obtained from complex LSMs provide little added skill (< 5% in relative terms) in anticipating variations in vegetation condition relative to a simplified water accounting procedure based solely on observed precipitation. However, larger amounts of added skill (5–15% in relative terms) can be identified when focusing exclusively on the extra-tropical growing season and/or utilizing soil moisture values acquired by averaging across a multi-model ensemble.

Sign in / Sign up

Export Citation Format

Share Document