scholarly journals Benefit of microwave radiometer and cloud radar observations for data assimilation and fog process studies during the SOFOG3D experiment

2021 ◽  
Author(s):  
Pauline Martinet ◽  
Frédéric Burnet ◽  
Alistair Bell ◽  
Arthur Kremer ◽  
Matthias Letillois ◽  
...  
Keyword(s):  
Data Assimilation ◽  
Prediction Models ◽  
Weather Prediction ◽  
Ensemble Prediction ◽  
Initial State ◽  
Ensemble Prediction System ◽  
Radar Observations ◽  
Stratus Clouds ◽  
Cloud Radar ◽  
Physical Parameterizations

<p>Fog forecasts still remain quite inaccurate due to the complexity, non linearities and fine scale of the main physical processes driving the fog lifecycle. Additionally to the complex modelling of fog processes, current numerical weather prediction models are known to suffer from a lack of operational observations in the atmospheric boundary layer and more generally during cloudy-sky conditions. Continuous observations of both thermodynamics and microphysics during the fog lifecycle are thus essential to develop future operational networks with the aim of validating current physical parameterizations and improving the model initial state through data assimilation techniques. In this context, an international network of 8 ground-based microwave radiometers (MWRs) has been deployed at a regional-scale on a 300 x 300 km domain during the SOFOG3D (SOuth FOGs 3D experiment for fog processes study) that has been conducted from October 2019 to April 2020. The MWR network has been extended with ceilometers at all MWR sites and additional microphysical observations from the 95 GHz cloud radar BASTA at two major sites as well as wind measurements from a Doppler lidar deployed at the super-site. After an overview of the SOFOG3D objectives and experimental set-up, preliminary results exploiting mainly the MWR network and cloud radar observations will be presented. Firstly, the capability of MWRs to provide temperature and humidity retrievals within fog and stratus clouds will be evaluated and discussed against radiosoundings launched during intensive observation periods (IOPs). Secondly, first retrievals of liquid water content profiles within fog and stratus clouds derived from the synergy between MWRs and the BASTA cloud radar will be presented. To that end, a one dimensional variational approach (1D-Var) directly assimilating MWR brightness temperatures and cloud-radar reflectivities has been developed. 1D-Var retrievals will be validated through a dataset of simulated observations and real fog cases of the SOFOG3D experiment. The capability of MWR and cloud radar observations to improve the initial state of the AROME model during fog conditions will be discussed with a focus on selected case studies. Finally, the usefulness of ground-based remote sensing networks to improve our understanding of fog processes and to validate physical parameterizations will be illustrated using the operational AROME model and the AROME Ensemble Prediction System</p>

scholarly journals Assessing parametrization uncertainty associated with horizontal resolution in numerical weather prediction models

2014 ◽  
Vol 372 (2018) ◽  
pp. 20130284 ◽  
Author(s):  
Glenn Shutts ◽  
Alfons Callado Pallarès
Keyword(s):  
Prediction Models ◽  
Weather Prediction ◽  
Model Error ◽  
Horizontal Resolution ◽  
Phase Changes ◽  
Ensemble Prediction ◽  
Condensation Temperature ◽  
Ensemble Prediction System ◽  
The Mean ◽  
Temperature Tendency

The need to represent uncertainty resulting from model error in ensemble weather prediction systems has spawned a variety of ad hoc stochastic algorithms based on plausible assumptions about sub-grid-scale variability. Currently, few studies have been carried out to prove the veracity of such schemes and it seems likely that some implementations of stochastic parametrization are misrepresentations of the true source of model uncertainty. This paper describes an attempt to quantify the uncertainty in physical parametrization tendencies in the European Centre for Medium-Range Weather Forecasts (ECMWF) Integrated Forecasting System with respect to horizontal resolution deficiency. High-resolution truth forecasts are compared with matching target forecasts at much lower resolution after coarse-graining to a common spatial and temporal resolution. In this way, model error is defined and its probability distribution function is examined as a function of tendency magnitude. It is found that the temperature tendency error associated with convection parametrization and explicit water phase changes behaves like a Poisson process for which the variance grows in proportion to the mean, which suggests that the assumptions underpinning the Craig and Cohen statistical model of convection might also apply to parametrized convection. By contrast, radiation temperature tendency errors have a very different relationship to their mean value. These findings suggest that the ECMWF stochastic perturbed parametrization tendency scheme could be improved since it assumes that the standard deviation of the tendency error is proportional to the mean. Using our finding that the variance error is proportional to the mean, a prototype stochastic parametrization scheme is devised for convective and large-scale condensation temperature tendencies and tested within the ECMWF Ensemble Prediction System. Significant impact on forecast skill is shown, implying its potential for further development.

A Spectral Stochastic Kinetic Energy Backscatter Scheme and Its Impact on Flow-Dependent Predictability in the ECMWF Ensemble Prediction System

2009 ◽  
Vol 66 (3) ◽  
pp. 603-626 ◽  
Author(s):  
J. Berner ◽  
G. J. Shutts ◽  
M. Leutbecher ◽  
T. N. Palmer
Keyword(s):  
Kinetic Energy ◽  
Prediction Models ◽  
Positive Impact ◽  
Weather Prediction ◽  
Coarse Grained ◽  
Ensemble Prediction ◽  
Spectral Space ◽  
Prediction System ◽  
Ensemble Prediction System ◽  
Integration Schemes

Abstract Understanding model error in state-of-the-art numerical weather prediction models and representing its impact on flow-dependent predictability remains a complex and mostly unsolved problem. Here, a spectral stochastic kinetic energy backscatter scheme is used to simulate upscale-propagating errors caused by unresolved subgrid-scale processes. For this purpose, stochastic streamfunction perturbations are generated by autoregressive processes in spectral space and injected into regions where numerical integration schemes and parameterizations in the model lead to excessive systematic kinetic energy loss. It is demonstrated how output from coarse-grained high-resolution models can be used to inform the parameters of such a scheme. The performance of the spectral backscatter scheme is evaluated in the ensemble prediction system of the European Centre for Medium-Range Weather Forecasts. Its implementation in conjunction with reduced initial perturbations results in a better spread–error relationship, more realistic kinetic-energy spectra, a better representation of forecast-error growth, improved flow-dependent predictability, improved rainfall forecasts, and better probabilistic skill. The improvement is most pronounced in the tropics and for large-anomaly events. It is found that whereas a simplified scheme assuming a constant dissipation rate already has some positive impact, the best results are obtained for flow-dependent formulations of the unresolved processes.

scholarly journals The HARMONIE–AROME Model Configuration in the ALADIN–HIRLAM NWP System

2017 ◽  
Vol 145 (5) ◽  
pp. 1919-1935 ◽  
Author(s):  
Lisa Bengtsson ◽  
Ulf Andrae ◽  
Trygve Aspelien ◽  
Yurii Batrak ◽  
Javier Calvo ◽  
...  
Keyword(s):  
Short Range ◽  
Weather Prediction ◽  
Joint Modeling ◽  
Horizontal Resolution ◽  
Ensemble Prediction ◽  
Modeling Framework ◽  
Time Step ◽  
Ensemble Prediction System ◽  
Nwp Model ◽  
Physical Parameterizations

Abstract The aim of this article is to describe the reference configuration of the convection-permitting numerical weather prediction (NWP) model HARMONIE-AROME, which is used for operational short-range weather forecasts in Denmark, Estonia, Finland, Iceland, Ireland, Lithuania, the Netherlands, Norway, Spain, and Sweden. It is developed, maintained, and validated as part of the shared ALADIN–HIRLAM system by a collaboration of 26 countries in Europe and northern Africa on short-range mesoscale NWP. HARMONIE–AROME is based on the model AROME developed within the ALADIN consortium. Along with the joint modeling framework, AROME was implemented and utilized in both northern and southern European conditions by the above listed countries, and this activity has led to extensive updates to the model’s physical parameterizations. In this paper the authors present the differences in model dynamics and physical parameterizations compared with AROME, as well as important configuration choices of the reference, such as lateral boundary conditions, model levels, horizontal resolution, model time step, as well as topography, physiography, and aerosol databases used. Separate documentation will be provided for the atmospheric and surface data-assimilation algorithms and observation types used, as well as a separate description of the ensemble prediction system based on HARMONIE–AROME, which is called HarmonEPS.

scholarly journals W-band radar observations for fog forecast improvement: an analysis of model and forward operator errors

2021 ◽  
Vol 14 (7) ◽  
pp. 4929-4946
Author(s):  
Alistair Bell ◽  
Pauline Martinet ◽  
Olivier Caumont ◽  
Benoît Vié ◽  
Julien Delanoë ◽  
...  
Keyword(s):  
Data Assimilation ◽  
Time Window ◽  
Weather Prediction ◽  
Optimal Solution ◽  
Numerical Weather Prediction Model ◽  
Radar Observations ◽  
Cloud Radar ◽  
Fog Microphysics ◽  
Radar Measurements ◽  
Forward Operator

Abstract. The development of ground-based cloud radars offers a new capability to continuously monitor fog structure. Retrievals of fog microphysics are key for future process studies, data assimilation, or model evaluation and can be performed using a variational method. Both the one-dimensional variational retrieval method (1D-Var) or direct 3D/4D-Var data assimilation techniques rely on the combination of cloud radar measurements and a background profile weighted by their corresponding uncertainties to obtain the optimal solution for the atmospheric state. In order to prepare for the use of ground-based cloud radar measurements for future applications based on variational approaches, the different sources of uncertainty due to instrumental, background, and forward operator errors need to be properly treated and accounted for. This paper aims at preparing 1D-Var retrievals by analysing the errors associated with a background profile and a forward operator during fog conditions. For this, the background was provided by a high-resolution numerical weather prediction model and the forward operator by a radar simulator. Firstly, an instrumental dataset was taken from the SIRTA observatory near Paris, France, for winter 2018–2019 during which 31 fog events were observed. Statistics were calculated comparing cloud radar observations to those simulated. It was found that the accuracy of simulations could be drastically improved by correcting for significant spatio-temporal background errors. This was achieved by implementing a most resembling profile method in which an optimal model background profile is selected from a domain and time window around the observation location and time. After selecting the background profiles with the best agreement with the observations, the standard deviation of innovations (observations–simulations) was found to decrease significantly. Moreover, innovation statistics were found to satisfy the conditions needed for future 1D-Var retrievals (un-biased and normally distributed).

scholarly journals Impact of Resolution Degradation of the Initial Condition on Typhoon Track Forecasts

2010 ◽  
Vol 25 (5) ◽  
pp. 1568-1573 ◽  
Author(s):  
Takemasa Miyoshi ◽  
Takuya Komori ◽  
Hitoshi Yonehara ◽  
Ryota Sakai ◽  
Munenhiko Yamaguchi
Keyword(s):  
High Resolution ◽  
Data Assimilation ◽  
Initial Conditions ◽  
Global Analysis ◽  
Weather Prediction ◽  
Japan Meteorological Agency ◽  
Ensemble Prediction ◽  
Initial Condition ◽  
Ensemble Prediction System ◽  
Typhoon Track

Abstract The operational numerical weather prediction (NWP) systems at the Japan Meteorological Agency (JMA) indicated that the typhoon track forecasts made by the control member of the ensemble prediction system (EPS) tended to be worse than those made by the high-resolution global NWP. The control forecast of the EPS with horizontal triangular truncation at 319 wavenumbers and 60 vertical levels (T319/L60 resolution) was initialized by eliminating the higher-wavenumber components of the global analysis at T959/L60 resolution. When the data assimilation cycle was performed at the lower T319/L60 resolution, the forecast gave typhoon track forecasts closer to the high-resolution global NWP. Therefore, it stands to reason that the resolution transform of the initial condition must be responsible for the degradation of the typhoon track forecasts at least to considerable extent. To improve the low-resolution forecast, two approaches are tested in this study: 1) applying a smoother spectral truncation for the resolution transform and 2) performing noncycled lower-resolution data assimilation during preprocessing. Results from the single case study of Typhoon Nuri (2008) indicate almost no impact from the former approach, but a significant positive impact when using the latter approach. The results of this study illuminate the importance of considering a model’s resolving capability during data assimilation. Namely, if the initial conditions contain features caused by unresolved scales, degraded forecasts may result.

scholarly journals Prediction of Lake-Effect Snow Using Convection-Allowing Ensemble Forecasts and Regional Data Assimilation

2017 ◽  
Vol 32 (5) ◽  
pp. 1727-1744 ◽  
Author(s):  
Seth Saslo ◽  
Steven J. Greybush
Keyword(s):  
Data Assimilation ◽  
Great Lakes ◽  
Forecast Error ◽  
Weather Prediction ◽  
The United States ◽  
Ensemble Prediction ◽  
Great Lakes Region ◽  
Prediction System ◽  
Ensemble Prediction System ◽  
Lake Effect

Abstract Lake-effect snow (LES) is a cold-season mesoscale convective phenomenon that can lead to significant snowfall rates and accumulations in the Great Lakes region of the United States. While limited-area numerical weather prediction models have shown skill in prediction of warm-season convective storms, forecasting the sharp nature of LES precipitation timing, intensity, and location is difficult because of model error and initial and boundary condition uncertainties. Ensemble forecasting can incorporate and quantify some sources of forecast error, but ensemble design must be considered. This study examines the relative contributions of forecast uncertainties to LES forecast error using a regional convection-allowing data assimilation and ensemble prediction system. Ensembles are developed using various methods of perturbations to simulate a long-lived and high-precipitation LES event in December 2013, and forecast performance is evaluated using observations including those from the Ontario Winter Lake-Effect Systems (OWLeS) campaign. Model lateral boundary conditions corresponding to weather conditions beyond the Great Lakes region play an influential role in LES precipitation forecasts and their uncertainty, as evidenced by ensemble spread, particularly at lead times beyond one day. A strong forecast dependence on regional initial conditions was shown using data assimilation. This sensitivity impacts the timing and intensity of predicted precipitation, as well as band location and orientation assessed with an object-based verification approach, giving insight into the time scales of practical predictability of LES. Overall, an assimilation-cycling convection-allowing ensemble prediction system could improve future lake-effect snow precipitation forecasts and analyses and can help quantify and understand sources of forecast uncertainty.

scholarly journals W-band Radar Observations for Fog Forecast Improvement: an Analysis of Model and Forward Operator Errors

2021 ◽  
Author(s):  
Alistair Bell ◽  
Pauline Martinet ◽  
Olivier Caumont ◽  
Benoît Vié ◽  
Julien Delanoë ◽  
...  
Keyword(s):  
Data Assimilation ◽  
Time Window ◽  
Weather Prediction ◽  
Optimal Solution ◽  
Numerical Weather Prediction Model ◽  
Radar Observations ◽  
Cloud Radar ◽  
Fog Microphysics ◽  
Radar Measurements ◽  
Forward Operator

Abstract. The development of ground based cloud radars offers a new capability to continuously monitor the fog structure. Retrievals of fog microphysics is key for future process studies, data assimilation or model evaluation, and can be performed using a variational method. Both the one-dimensional variational retrieval method (1D-Var) or direct 3D/4D-Var data assimilation techniques rely on the combination of cloud radar measurements and a background profile weighted by their corresponding uncertainties to obtain the optimal solution for the atmospheric state. In order to prepare for the use of ground-based cloud radar measurements for future applications based on variational approaches, the different sources of uncertainty due to instrumental, background, and the forward operator errors need to be properly treated and accounted for. This paper aims at preparing 1D-Var retrievals by analysing the errors associated with a background profile and a forward operator during fog conditions. For this, the background was provided by a high-resolution numerical weather prediction model and the forward operator by a radar simulator. Firstly, an instrumental dataset was taken from the SIRTA observatory near Paris, France for winter 2018–19 during which 31 fog events were observed. Statistics were calculated comparing cloud radar observations to those simulated. It was found that the accuracy of simulations could be drastically improved by correcting for significant spatio-temporal background errors. This was achieved by implementing a most resembling profile method in which an optimal model background profile is selected from a domain and time window around the observation location and time. After selecting the best background profile a good agreement was found between observations and simulations. Moreover, observation minus simulation errors were found to satisfy the conditions needed for future 1D-var retrievals (un-biased and normally distributed).

scholarly journals Toward Real-Time Daily PQPF by an Analog Sorting Approach: Application to Flash-Flood Catchments

2012 ◽  
Vol 51 (3) ◽  
pp. 505-520 ◽  
Author(s):  
Renaud Marty ◽  
Isabella Zin ◽  
Charles Obled ◽  
Guillaume Bontron ◽  
Abdelatif Djerboua
Keyword(s):  
Heavy Rainfall ◽  
Prediction Models ◽  
Flash Flood ◽  
Weather Prediction ◽  
Ensemble Prediction ◽  
Limited Area ◽  
Ensemble Prediction System ◽  
Rainfall Events ◽  
Sorting Technique ◽  
Heavy Rainfall Events

AbstractHeavy-rainfall events are common in southern France and frequently result in devastating flash floods. Thus, an appropriate anticipation of future rainfall is required: for early flood warning, at least 12–24 h in advance; for alerting operational services, at least 2–3 days ahead. Precipitation forecasts are generally provided by numerical weather prediction models (NWP), and their associated uncertainty is generally estimated through an ensemble approach. Precipitation forecasts also have to be adapted to hydrological scales. This study describes an alternative approach to commonly used limited-area models. Probabilistic quantitative precipitation forecasts (PQPFs) are provided through an analog sorting technique, which directly links synoptic-scale NWP output to catchment-scale rainfall probability distributions. One issue concerns the latest developments in implementing a daily version of this technique into operational conditions. It is shown that the obtained PQPFs depend on the meteorological forecasts used for selecting analogous days and that the method has to be reoptimized when changing the source of synoptic forecasts, because of the NWP output uncertainties. Second, an evaluation of the PQPFs demonstrates that the analog technique performs well for early warning of heavy-rainfall events and provides useful information as potential input to a hydrological ensemble prediction system. It is shown that the obtained daily rainfall distributions can be unreliable. A statistical correction of the observed bias is proposed as a function of the no-rain frequency values, leading to a significant improvement in PQPF sharpness.

scholarly journals Predictability of Deep Convection in Idealized and Operational Forecasts: Effects of Radar Data Assimilation, Orography, and Synoptic Weather Regime

2019 ◽  
Vol 148 (1) ◽  
pp. 63-81 ◽  
Author(s):  
Kevin Bachmann ◽  
Christian Keil ◽  
George C. Craig ◽  
Martin Weissmann ◽  
Christian A. Welzbacher
Keyword(s):  
Data Assimilation ◽  
Deep Convection ◽  
Radar Data ◽  
Ensemble Prediction ◽  
Small Scale ◽  
Model Errors ◽  
Ensemble Prediction System ◽  
Beneficial Impact ◽  
The Impact ◽  
Radar Data Assimilation

Abstract We investigate the practical predictability limits of deep convection in a state-of-the-art, high-resolution, limited-area ensemble prediction system. A combination of sophisticated predictability measures, namely, believable and decorrelation scale, are applied to determine the predictable scales of short-term forecasts in a hierarchy of model configurations. First, we consider an idealized perfect model setup that includes both small-scale and synoptic-scale perturbations. We find increased predictability in the presence of orography and a strongly beneficial impact of radar data assimilation, which extends the forecast horizon by up to 6 h. Second, we examine realistic COSMO-KENDA simulations, including assimilation of radar and conventional data and a representation of model errors, for a convectively active two-week summer period over Germany. The results confirm increased predictability in orographic regions. We find that both latent heat nudging and ensemble Kalman filter assimilation of radar data lead to increased forecast skill, but the impact is smaller than in the idealized experiments. This highlights the need to assimilate spatially and temporally dense data, but also indicates room for further improvement. Finally, the examination of operational COSMO-DE-EPS ensemble forecasts for three summer periods confirms the beneficial impact of orography in a statistical sense and also reveals increased predictability in weather regimes controlled by synoptic forcing, as defined by the convective adjustment time scale.

Can the Direct Effect of Aerosols Improve Subseasonal Predictability?

2018 ◽  
Vol 146 (10) ◽  
pp. 3481-3498 ◽  
Author(s):  
Angela Benedetti ◽  
Frédéric Vitart
Keyword(s):  
Weather Prediction ◽  
Ensemble Prediction ◽  
Radiation Balance ◽  
Carbonaceous Aerosols ◽  
Madden Julian Oscillation ◽  
Reasonable Accuracy ◽  
Ensemble Prediction System ◽  
Radiative Fluxes ◽  
Aerosol Effect ◽  
Definite Proof

Abstract The fact that aerosols are important players in Earth’s radiation balance is well accepted by the scientific community. Several studies have shown the importance of characterizing aerosols in order to constrain surface radiative fluxes and temperature in climate runs. In numerical weather prediction, however, there has not been definite proof that interactive aerosol schemes are needed to improve the forecast. Climatologies are instead used that allow for computational efficiency and reasonable accuracy. At the monthly to subseasonal range, it is still worth investigating whether aerosol variability could afford some predictability, considering that it is likely that persisting aerosol biases might manifest themselves more over time scales of weeks to months and create a nonnegligible forcing. This paper explores this hypothesis using the ECMWF’s Ensemble Prediction System for subseasonal prediction with interactive prognostic aerosols. Four experiments are conducted with the aim of comparing the monthly prediction by the default system, which uses aerosol climatologies, with the prediction using radiatively interactive aerosols. Only the direct aerosol effect is considered. Twelve years of reforecasts with 50 ensemble members are analyzed on the monthly scale. Results indicate that the interactive aerosols have the capability of improving the subseasonal prediction at the monthly scales for the spring/summer season. It is hypothesized that this is due to the aerosol variability connected to the different phases of the Madden–Julian oscillation, particularly that of dust and carbonaceous aerosols. The degree of improvement depends crucially on the aerosol initialization. More work is required to fully assess the potential of interactive aerosols to increase predictability at the subseasonal scales.

Sign in / Sign up

Export Citation Format

Share Document