scholarly journals Recent Applications and Advances of Numerical Modeling and Wavefield Inversion in Nondestructive Testing

2005 ◽  
Vol 3 ◽  
pp. 167-174 ◽  
Author(s):  
R. Marklein ◽  
K. J. Langenberg ◽  
K. Mayer ◽  
J. Miao ◽  
A. Shlivinski ◽  
...  
Keyword(s):  
Nondestructive Testing ◽  
Time Domain ◽  
Linear Time ◽  
Synthetic Aperture ◽  
Diffraction Tomography ◽  
Nonlinear Inversion ◽  
Nonlinear Frequency ◽  
Source Inversion ◽  
Wavefield Inversion ◽  
Domain Inversion

Abstract. This paper presents recent advances and future challenges of the application of different linear and nonlinear inversion algorithms in acoustics, electromagnetics, and elastodynamics. The presented material can be understood as an extension of our previous work on this topic. The inversion methods considered in this presentation vary from linear schemes, like the Synthetic Aperture Radar (SAR) applied electromagnetics and the Synthetic Aperture Focussing Technique (SAFT) as its counterpart in ultrasonics, and the linearized Diffraction Tomography (DT), to nonlinear schemes, like the Contrast Source Inversion (CSI) combined with different regularization approaches. Inversion results of the above mentioned inversion schemes are presented and compared for instance for time-domain ultrasonic data from the Fraunhofer-Institute for Nondestructive Testing (IZFP, Saarbrücken, Germany). Convenient tools for nondestructive evaluation of solids can be electromagnetic and/or elastodynamic waves; since their governing equations, including acoustics, exhibit strong structural similarities, the same inversion concepts apply. In particular, the heuristic SAFT algorithm can be and has been utilized for all kinds of waves, once a scalar approximation can be justified. Relating SAFT to inverse scattering in terms of diffraction tomography, it turns out that linearization is the most stringent inherent approximation. A comparison of the inversion results using the linear time-domain inversion scheme SAFT and well tested nonlinear frequency-domain inversion schemes demonstrates the considerable potential to extend and improve the ultrasonic imaging technique SAFT while consulting the mathematics of wavefield inversion, yet, in particular if the underlying effort is considered, the relatively simple and effective SAFT algorithm works surprisingly well. Since SAFT is a widely accepted imaging tool in ultrasonic NDE it seems worthwhile to check its formal restrictions and assumptions whether they could be overcome and whether they would outperform the standard and original SAFT algorithm.

Concrete Modeling for Extreme Wave Slam Events

2017 ◽  
Author(s):  
Kasper Wåsjø ◽  
Terje P. Stavang ◽  
Tore H. Søreide
Keyword(s):  
Time Domain ◽  
Linear Time ◽  
Limit State ◽  
Material Model ◽  
Time Domain Analysis ◽  
Domain Analysis ◽  
Capacity Control ◽  
Extreme Wave ◽  
Conventional Design ◽  
Non Linear

Experience from model tests has initiated a growing attention towards extreme wave slam as a critical load situation for offshore large volume structures. Most of the problem is related to the local slam pressure, which may go up to several MPa’s for 100-year and 10 000-year waves. The paper deals with modeling techniques for marine concrete structures under extreme slam loading from waves where dynamic effects together with material softening play a major role for the response. Different analysis approaches for ultimate limit state (ULS) and accidental limit state (ALS) controls are discussed in view of reliability philosophy as basis for conventional design approach. The present paper is devoted to the local impact scenario and the alternative approaches for response and capacity control involving non-linear time domain analyses. Conventional design schemes as based on linear elastic models for response calculation together with code specified capacity control often come out more conservative than non-linear approach. The paper demonstrates by case studies how softening of the structure in general reduces the response in terms of section forces. A key issue when going from conventional linear approaches into non-linear techniques is to still keep an acceptable reliability level on the capacity control. Load and material factors are normally based on structures with limited non-linearity where linear response modeling is representative. Implementing non-linear material model in time domain analysis has a major challenge in limiting the sensitivity in response and capacity calculation. The paper demonstrates the way material model of concrete affects the section forces to go into local capacity control, and concludes on needed sensitivity analyses. Practical approaches on the concrete slam problem together with resulting utilizations from the control are demonstrated. The full non-linear technique by response and capacity control in one analysis is also handled, using average material parameters and justifying safety factors for the effect of implementing characteristic lower strength of concrete in the capacity. The paper ends up in a recommendation on non-linear time domain analysis procedure for typically slam problems. A discussion is also given on applicable design codes with attention to non-linear analysis.

Time-domain noise analysis of linear time-Invariant and linear time-variant systems using MATLAB and HSPICE

2005 ◽  
Vol 52 (3) ◽  
pp. 805-812 ◽  
Author(s):  
S.C. Terry ◽  
B.J. Blalock ◽  
J.M. Rochelle ◽  
M.N. Ericson ◽  
S.D. Caylor
Keyword(s):  
Time Domain ◽  
Linear Time ◽  
Noise Analysis ◽  
Linear Time Invariant ◽  
Time Invariant

A Linear Time-Domain Two-Fluid Model Analysis of Dynamic Instability in Boiling Flow Systems

1986 ◽  
Vol 108 (1) ◽  
pp. 100-108 ◽  
Author(s):  
R. C. Dykhuizen ◽  
R. P. Roy ◽  
S. P. Kalra
Keyword(s):  
Time Domain ◽  
Dynamic Instability ◽  
Linear Time ◽  
Fluid Model ◽  
Density Wave ◽  
Model Description ◽  
Flow Systems ◽  
Boiling Flow ◽  
Two Fluid Model ◽  
Two Fluid

A linear analysis of dynamic instability in boiling flow systems has been carried out in the time domain. An unequal velocity, unequal temperature two-fluid model description of boiling flow is used. Instability threshold results of the density-wave oscillation type obtained have been compared with experimental data from Refrigerant-113 and water systems with satisfactory agreement.

scholarly journals Synthetic Aperture Radar Processing Approach for Simultaneous Target Detection and Image Formation

Sensors ◽  
2018 ◽  
Vol 18 (10) ◽  
pp. 3377 ◽  
Author(s):  
Jifang Pei ◽  
Yulin Huang ◽  
Weibo Huo ◽  
Yuxuan Miao ◽  
Yin Zhang ◽  
...  
Keyword(s):  
Synthetic Aperture Radar ◽  
Target Detection ◽  
Time Domain ◽  
Image Formation ◽  
Visual Saliency ◽  
Synthetic Aperture ◽  
Sar Images ◽  
Saliency Maps ◽  
Sar Imaging ◽  
Sar Imagery

Finding out interested targets from synthetic aperture radar (SAR) imagery is an attractive but challenging problem in SAR application. Traditional target detection is independent on SAR imaging process, which is purposeless and unnecessary. Hence, a new SAR processing approach for simultaneous target detection and image formation is proposed in this paper. This approach is based on SAR imagery formation in time domain and human visual saliency detection. First, a series of sub-aperture SAR images with resolutions from low to high are generated by the time domain SAR imaging method. Then, those multiresolution SAR images are detected by the visual saliency processing, and the corresponding intermediate saliency maps are obtained. The saliency maps are accumulated until the result with a sufficient confidence level. After some screening operations, the target regions on the imaging scene are located, and only these regions are focused with full aperture integration. Finally, we can get the SAR imagery with high-resolution detected target regions but low-resolution clutter background. Experimental results have shown the superiority of the proposed approach for simultaneous target detection and image formation.

On the Application of Frequency-Domain Methods to Multistage Turbomachinery

2015 ◽  
Author(s):  
Laura Junge ◽  
Graham Ashcroft ◽  
Peter Jeschke ◽  
Christian Frey
Keyword(s):  
Frequency Domain ◽  
Time Domain ◽  
Harmonic Balance ◽  
Axial Compressor ◽  
Harmonic Balance Method ◽  
Nonlinear Frequency ◽  
Solution Quality ◽  
Multi Stage ◽  
Frequency Domain Methods ◽  
Blade Row

Due to the relative motion between adjacent blade rows the aerodynamic flow fields within turbomachinery are normally dominated by deterministic, periodic phenomena. In the numerical simulation of such unsteady flows (nonlinear) frequency-domain methods are therefore attractive as they are capable of fully exploiting the given spatial and temporal periodicity, as well as capturing or modelling flow nonlinearity. Central to the efficiency and accuracy of such frequency-domain methods is the selection of the frequencies and the circumferential modes to be resolved in simulations. Whilst trivial in the context of the simulation of a single compressor- or turbine-stage, the choice of solution modes becomes substantially more involved in multi-stage configurations. In this work the importance of mode scattering, in the context of the unsteady aerodynamic field, is investigated and quantified. It is shown that scattered modes can substantially impact the unsteady flow field and are essential for the accurate modelling of wake propagation within multistage configurations. Furthermore, an iterative approach is outlined, based on the spectral analysis of the circumferential modes at the interfaces between blade rows, to identify the dominant solution modes that should be resolved in the adjacent blade row. To demonstrate the importance of mode scattering and validate the approach for their identification the unsteady blade row interaction within a 4.5 stage axial compressor is computed using both the harmonic balance method and, based on a full annulus midspan simulation, a time-domain method. Through the inclusion of scattered modes it is shown that the solution quality of the harmonic balance results is comparable to that of the nonlinear time-domain simulation.

Spectral analysis of time domain diffraction tomography

Radio Science ◽  
1997 ◽  
Vol 32 (2) ◽  
pp. 593-603 ◽  
Author(s):  
Timor Melamed ◽  
Ehud Heyman
Keyword(s):  
Spectral Analysis ◽  
Time Domain ◽  
Diffraction Tomography
Sign in / Sign up

Export Citation Format

Share Document