Technical Note: Gas Phase Pesticide Measurement Using Iodide Ionization Time-of-Flight Mass Spectrometry

Volatilization and subsequent processing in the atmosphere is an important environmental pathway for the transport and chemical fate of pesticides. However, these processes remain a particularly poorly understood component of pesticide lifecycles due to analytical challenges. Most pesticide measurements require long (hours to days) sampling times coupled with off-line analysis, inhibiting observation of meteorologically driven events or investigation of rapid oxidation chemistry. Here, we present chemical ionization time-of-flight mass spectrometry with iodide reagent ions as a fast and sensitive measurement of four current-use pesticides. These semi-volatile pesticides were calibrated with injections of solutions onto a filter and subsequently volatilized to generate gas phase analytes. Trifluralin and atrazine are detected as iodide-molecule adducts, while permethrin and metolachlor are detected as adducts between iodide and fragments of the parent analyte molecule. Limits of detection (1 second) are 0.37, 0.67, 0.56, and 1.1 µg/m3 for gas phase trifluralin, metolachlor, atrazine and permethrin, respectively. The sensitivities of trifluralin and metolachlor depend on relative humidity, changing as much as 70 % and 59 %, respectively, as relative humidity of the sample air varies from 0 to 80 %. This measurement approach is thus appropriate for laboratory experiments and potentially near-source field measurements.