scholarly journals Fennec dust forecast intercomparison over the Sahara in June 2011

2016 ◽  
Author(s):  
J.-P. Chaboureau ◽  
C. Flamant ◽  
T. Dauhut ◽  
C. Kocha ◽  
J.-P. Lafore ◽  
...  
Keyword(s):  
High Resolution ◽  
Surface Wind ◽  
Dust Emission ◽  
Airborne Lidar ◽  
Data Sets ◽  
Density Currents ◽  
Data Set ◽  
Near Surface ◽  
Western Sahara ◽  
Deep Well

Abstract. In the framework of the Fennec international programme, a field campaign was conducted in June 2011 over the western Sahara. It led to the first observational data set ever obtained that documents the dynamics, thermodynamics and composition of the Saharan atmospheric boundary layer (SABL) under the influence of the heat low. In support to the aircraft operation, four dust forecasts were run daily at low and high resolutions with convection-parameterizing and convection- permitting models, respectively. The unique airborne and ground-based data sets allowed the first ever intercomparison of dust forecasts over the western Sahara. At monthly scale, large Aerosol Optical Depths (AODs) were forecast over the Sahara, a feature observed by some satellite retrievals but mislocated by others over the Sahel. The AOD intensity was correctly predicted by the highresolution models while being underestimated by the low-resolution models. This was partly because of the generation of strong near-surface wind associated with thunderstorm-related density currents that could only be reproduced by models representing convection explicitly. Such models yield to emissions mainly in the afternoon that dominate the total emission over the western fringes of the Adrar des Iforas and Aïr Mountains in the high-resolution forecasts. Over the western Sahara, where the harmattan contributes up to 80 % of dust emission, all the models were successful in forecasting the deep well-mixed SABL. Some of them, however, missed the large near-surface dust extinction generated by density currents and low-level winds. This feature, observed repeatedly by the airborne lidar, was partly forecast by one high-resolution model only.

scholarly journals Fennec dust forecast intercomparison over the Sahara in June 2011

2016 ◽  
Vol 16 (11) ◽  
pp. 6977-6995 ◽  
Author(s):  
Jean-Pierre Chaboureau ◽  
Cyrille Flamant ◽  
Thibaut Dauhut ◽  
Cécile Kocha ◽  
Jean-Philippe Lafore ◽  
...  
Keyword(s):  
High Resolution ◽  
Surface Wind ◽  
Dust Emission ◽  
Airborne Lidar ◽  
Data Sets ◽  
Density Currents ◽  
Data Set ◽  
Near Surface ◽  
Western Sahara ◽  
Deep Well

Abstract. In the framework of the Fennec international programme, a field campaign was conducted in June 2011 over the western Sahara. It led to the first observational data set ever obtained that documents the dynamics, thermodynamics and composition of the Saharan atmospheric boundary layer (SABL) under the influence of the heat low. In support to the aircraft operation, four dust forecasts were run daily at low and high resolutions with convection-parameterizing and convection-permitting models, respectively. The unique airborne and ground-based data sets allowed the first ever intercomparison of dust forecasts over the western Sahara. At monthly scale, large aerosol optical depths (AODs) were forecast over the Sahara, a feature observed by satellite retrievals but with different magnitudes. The AOD intensity was correctly predicted by the high-resolution models, while it was underestimated by the low-resolution models. This was partly because of the generation of strong near-surface wind associated with thunderstorm-related density currents that could only be reproduced by models representing convection explicitly. Such models yield emissions mainly in the afternoon that dominate the total emission over the western fringes of the Adrar des Iforas and the Aïr Mountains in the high-resolution forecasts. Over the western Sahara, where the harmattan contributes up to 80 % of dust emission, all the models were successful in forecasting the deep well-mixed SABL. Some of them, however, missed the large near-surface dust concentration generated by density currents and low-level winds. This feature, observed repeatedly by the airborne lidar, was partly forecast by one high-resolution model only.

scholarly journals High-resolution numerical modeling of mesoscale island wakes and sensitivity to static topographic relief data

2015 ◽  
Vol 8 (8) ◽  
pp. 2645-2653 ◽  
Author(s):  
C. G. Nunalee ◽  
Á. Horváth ◽  
S. Basu
Keyword(s):  
High Resolution ◽  
Vortex Shedding ◽  
Weather Prediction ◽  
Surface Wind ◽  
Wrf Model ◽  
Data Sets ◽  
Data Set ◽  
Near Surface ◽  
Nwp Model ◽  
Height Data

Abstract. Recent decades have witnessed a drastic increase in the fidelity of numerical weather prediction (NWP) modeling. Currently, both research-grade and operational NWP models regularly perform simulations with horizontal grid spacings as fine as 1 km. This migration towards higher resolution potentially improves NWP model solutions by increasing the resolvability of mesoscale processes and reducing dependency on empirical physics parameterizations. However, at the same time, the accuracy of high-resolution simulations, particularly in the atmospheric boundary layer (ABL), is also sensitive to orographic forcing which can have significant variability on the same spatial scale as, or smaller than, NWP model grids. Despite this sensitivity, many high-resolution atmospheric simulations do not consider uncertainty with respect to selection of static terrain height data set. In this paper, we use the Weather Research and Forecasting (WRF) model to simulate realistic cases of lower tropospheric flow over and downstream of mountainous islands using the default global 30 s United States Geographic Survey terrain height data set (GTOPO30), the Shuttle Radar Topography Mission (SRTM), and the Global Multi-resolution Terrain Elevation Data set (GMTED2010) terrain height data sets. While the differences between the SRTM-based and GMTED2010-based simulations are extremely small, the GTOPO30-based simulations differ significantly. Our results demonstrate cases where the differences between the source terrain data sets are significant enough to produce entirely different orographic wake mechanics, such as vortex shedding vs. no vortex shedding. These results are also compared to MODIS visible satellite imagery and ASCAT near-surface wind retrievals. Collectively, these results highlight the importance of utilizing accurate static orographic boundary conditions when running high-resolution mesoscale models.

Progressive landslide activity analysis and monitoring from Multi-temporal high-resolution geoinfomatic data sets

2020 ◽  
Author(s):  
Kuo-Jen Chang ◽  
Chih-Ming Tseng ◽  
Ho-Hsuan Chang ◽  
Mei-Jen Huang
Keyword(s):  
High Resolution ◽  
Unmanned Aircraft ◽  
Airborne Lidar ◽  
Landslide Monitoring ◽  
Data Sets ◽  
Data Set ◽  
Wide Range ◽  
Hazardous Area ◽  
Multi Temporal ◽  
Rtk Gps

<p>Due to the high seismicity and high annual precipitation, numerous landslides have occurred and caused severe impact in Taiwan. In recent years, the remote sensing technology improves rapidly, providing a wide range of image, essential and precise geoinformation. The Small unmanned aircraft system (sUAS) has been widely used in landslide monitoring and geomorphic change detection. To access potential hazards we combine sUAS, field survey, terrestrial laser scanner (ground LiDAR) and UAS LiDAR for data acquisition. Based on the methods we construct multi-temporal high-resolution DTMs so as to access the activity and to monitoring the creeping landslides in Paolai village, southern Taiwan. The data set are qualified from 21 ground control points (GCPs) and 11 check points (CPs) based on real-time kinematic-global positioning system (RTK-GPS) and VBS RTK-GPS (e-GNSS). Since 2015, more than 10 geospatial datasets have been produced for an area between 5-80 Km<sup>2</sup> with 8-12 cm spatial resolution. These datasets were then compared with the airborne LiDAR data to access the quality and interpretability of the data sets. Since 2017, we integrate UAS LiDAR to monitoring landslide area, and re-evaluate the data accuracy. Since 2018 we have integrate UAS LiDAR, terrestrial LiDAR, and photogrammetric point cloud for landslide study, to ensure no shadow effect of the dataset. The geomorphologic changes and landslide activities were quantified in Paolai area. The results of this study provide not only geoinfomatic datasets of the hazardous area, but also for essential geomorphologic information for other study, and for hazard mitigation and planning, as well.</p>

scholarly journals High-resolution daily gridded data sets of air temperature and wind speed for Europe

2016 ◽  
Vol 8 (2) ◽  
pp. 491-516 ◽  
Author(s):  
Sven Brinckmann ◽  
Stefan Krähenmann ◽  
Peter Bissolli
Keyword(s):  
High Resolution ◽  
Wind Speed ◽  
Air Temperature ◽  
Data Sets ◽  
Grid Data ◽  
Data Set ◽  
Near Surface ◽  
High Resolution Data ◽  
Station Data ◽  
Mean Wind Speed

Abstract. New high-resolution data sets for near-surface daily air temperature (minimum, maximum and mean) and daily mean wind speed for Europe (the CORDEX domain) are provided for the period 2001–2010 for the purpose of regional model validation in the framework of DecReg, a sub-project of the German MiKlip project, which aims to develop decadal climate predictions. The main input data sources are SYNOP observations, partly supplemented by station data from the ECA&D data set (http://www.ecad.eu). These data are quality tested to eliminate erroneous data. By spatial interpolation of these station observations, grid data in a resolution of 0.044° (≈ 5km) on a rotated grid with virtual North Pole at 39.25° N, 162° W are derived. For temperature interpolation a modified version of a regression kriging method developed by Krähenmann et al.(2011) is used. At first, predictor fields of altitude, continentality and zonal mean temperature are used for a regression applied to monthly station data. The residuals of the monthly regression and the deviations of the daily data from the monthly averages are interpolated using simple kriging in a second and third step. For wind speed a new method based on the concept used for temperature was developed, involving predictor fields of exposure, roughness length, coastal distance and ERA-Interim reanalysis wind speed at 850 hPa. Interpolation uncertainty is estimated by means of the kriging variance and regression uncertainties. Furthermore, to assess the quality of the final daily grid data, cross validation is performed. Variance explained by the regression ranges from 70 to 90 % for monthly temperature and from 50 to 60 % for monthly wind speed. The resulting RMSE for the final daily grid data amounts to 1–2 K and 1–1.5 ms−1 (depending on season and parameter) for daily temperature parameters and daily mean wind speed, respectively. The data sets presented in this article are published at doi:10.5676/DWD_CDC/DECREG0110v2.

Data Sets

2013 ◽  
Author(s):  
James B. Elsner ◽  
Thomas H. Jagger
Keyword(s):  
Model Building ◽  
Careful Analysis ◽  
Logical Structure ◽  
Fortran Program ◽  
Data Sets ◽  
Data Set ◽  
Near Surface ◽  
Wind Speeds ◽  
The North ◽  
The One

Hurricane data originate from careful analysis of past storms by operational meteorologists. The data include estimates of the hurricane position and intensity at 6-hourly intervals. Information related to landfall time, local wind speeds, damages, and deaths, as well as cyclone size, are included. The data are archived by season. Some effort is needed to make the data useful for hurricane climate studies. In this chapter, we describe the data sets used throughout this book. We show you a work flow that includes importing, interpolating, smoothing, and adding attributes. We also show you how to create subsets of the data. Code in this chapter is more complicated and it can take longer to run. You can skip this material on first reading and continue with model building in Chapter 7. You can return here when you have an updated version of the data that includes the most recent years. Most statistical models in this book use the best-track data. Here we describe these data and provide original source material. We also explain how to smooth and interpolate them. Interpolations are needed for regional hurricane analyses. The best-track data set contains the 6-hourly center locations and intensities of all known tropical cyclones across the North Atlantic basin, including the Gulf of Mexico and Caribbean Sea. The data set is called HURDAT for HURricane DATa. It is maintained by the U.S. National Oceanic and Atmospheric Administration (NOAA) at the National Hurricane Center (NHC). Center locations are given in geographic coordinates (in tenths of degrees) and the intensities, representing the one-minute near-surface (∼10 m) wind speeds, are given in knots (1 kt = .5144 m s−1) and the minimum central pressures are given in millibars (1 mb = 1 hPa). The data are provided in 6-hourly intervals starting at 00 UTC (Universal Time Coordinate). The version of HURDAT file used here contains cyclones over the period 1851 through 2010 inclusive. Information on the history and origin of these data is found in Jarvinen et al (1984). The file has a logical structure that makes it easy to read with a FORTRAN program. Each cyclone contains a header record, a series of data records, and a trailer record.

scholarly journals Using kites for 3-D mapping of gullies at decimetre-resolution over several square kilometres: a case study on the Kamech catchment, Tunisia

2018 ◽  
Vol 18 (6) ◽  
pp. 1567-1582 ◽  
Author(s):  
Denis Feurer ◽  
Olivier Planchon ◽  
Mohamed Amine El Maaoui ◽  
Abir Ben Slimane ◽  
Mohamed Rached Boussema ◽  
...  
Keyword(s):  
High Resolution ◽  
Aerial Photography ◽  
Airborne Lidar ◽  
Data Set ◽  
Topographic Data ◽  
Independent Field ◽  
Wide Range ◽  
Laser Systems ◽  
High Level

Abstract. Monitoring agricultural areas threatened by soil erosion often requires decimetre topographic information over areas of several square kilometres. Airborne lidar and remotely piloted aircraft system (RPAS) imagery have the ability to provide repeated decimetre-resolution and -accuracy digital elevation models (DEMs) covering these extents, which is unrealistic with ground surveys. However, various factors hamper the dissemination of these technologies in a wide range of situations, including local regulations for RPAS and the cost for airborne laser systems and medium-format RPAS imagery. The goal of this study is to investigate the ability of low-tech kite aerial photography to obtain DEMs with decimetre resolution and accuracy that permit 3-D descriptions of active gullying in cultivated areas of several square kilometres. To this end, we developed and assessed a two-step workflow. First, we used both heuristic experimental approaches in field and numerical simulations to determine the conditions that make a photogrammetric flight possible and effective over several square kilometres with a kite and a consumer-grade camera. Second, we mapped and characterised the entire gully system of a test catchment in 3-D. We showed numerically and experimentally that using a thin and light line for the kite is key for a complete 3-D coverage over several square kilometres. We thus obtained a decimetre-resolution DEM covering 3.18 km2 with a mean error and standard deviation of the error of +7 and 22 cm respectively, hence achieving decimetre accuracy. With this data set, we showed that high-resolution topographic data permit both the detection and characterisation of an entire gully system with a high level of detail and an overall accuracy of 74 % compared to an independent field survey. Kite aerial photography with simple but appropriate equipment is hence an alternative tool that has been proven to be valuable for surveying gullies with sub-metric details in a square-kilometre-scale catchment. This case study suggests that access to high-resolution topographic data on these scales can be given to the community, which may help facilitate a better understanding of gullying processes within a broader spectrum of conditions.

scholarly journals Reconstruction of Axial Tomographic High Resolution Data from Confocal Fluorescence Microscopy: A Method for Improving 3D FISH Images

2000 ◽  
Vol 20 (1) ◽  
pp. 7-15 ◽  
Author(s):  
R. Heintzmann ◽  
G. Kreth ◽  
C. Cremer
Keyword(s):  
High Resolution ◽  
Laser Scanning ◽  
Axial Direction ◽  
Laser Scanning Microscopy ◽  
Three Dimensions ◽  
Confocal Laser ◽  
Data Sets ◽  
Data Set ◽  
High Resolution Data ◽  
3D Data

Fluorescent confocal laser scanning microscopy allows an improved imaging of microscopic objects in three dimensions. However, the resolution along the axial direction is three times worse than the resolution in lateral directions. A method to overcome this axial limitation is tilting the object under the microscope, in a way that the direction of the optical axis points into different directions relative to the sample. A new technique for a simultaneous reconstruction from a number of such axial tomographic confocal data sets was developed and used for high resolution reconstruction of 3D‐data both from experimental and virtual microscopic data sets. The reconstructed images have a highly improved 3D resolution, which is comparable to the lateral resolution of a single deconvolved data set. Axial tomographic imaging in combination with simultaneous data reconstruction also opens the possibility for a more precise quantification of 3D data. The color images of this publication can be accessed from http://www.esacp.org/acp/2000/20‐1/heintzmann.htm. At this web address an interactive 3D viewer is additionally provided for browsing the 3D data. This java applet displays three orthogonal slices of the data set which are dynamically updated by user mouse clicks or keystrokes.

scholarly journals Interpolation framework to speed up near-surface wind simulations for data-driven wildfire applications

2018 ◽  
Vol 27 (4) ◽  
pp. 257 ◽  
Author(s):  
O. Rios ◽  
W. Jahn ◽  
E. Pastor ◽  
M. M. Valero ◽  
E. Planas
Keyword(s):  
High Resolution ◽  
Surface Wind ◽  
Computation Time ◽  
Data Driven ◽  
Wind Fields ◽  
Near Surface ◽  
Finite Set ◽  
Multiple Resolutions ◽  
Feasible Alternative ◽  
Wildfire Spread

Local wind fields that account for topographic interaction are a key element for any wildfire spread simulator. Currently available tools to generate near-surface winds with acceptable accuracy do not meet the tight time constraints required for data-driven applications. This article presents the specific problem of data-driven wildfire spread simulation (with a strategy based on using observed data to improve results), for which wind diagnostic models must be run iteratively during an optimisation loop. An interpolation framework is proposed as a feasible alternative to keep a positive lead time while minimising the loss of accuracy. The proposed methodology was compared with the WindNinja solver in eight different topographic scenarios with multiple resolutions and reference – pre-run– wind map sets. Results showed a major reduction in computation time (~100 times once the reference fields are available) with average deviations of 3% in wind speed and 3° in direction. This indicates that high-resolution wind fields can be interpolated from a finite set of base maps previously computed. Finally, wildfire spread simulations using original and interpolated maps were compared showing minimal deviations in the fire shape evolution. This methodology may have an important effect on data assimilation frameworks and probabilistic risk assessment where high-resolution wind fields must be computed for multiple weather scenarios.

Rapid multi-scale analysis of near-surface geophysical anomaly maps: Application to an archaeo-geophysical data set

Geophysics ◽  
2020 ◽  
pp. 1-41 ◽  
Author(s):  
Jens Tronicke ◽  
Niklas Allroggen ◽  
Felix Biermann ◽  
Florian Fanselow ◽  
Julien Guillemoteau ◽  
...  
Keyword(s):  
Random Noise ◽  
Geophysical Data ◽  
Magnetic Data ◽  
Engineering Practice ◽  
Data Sets ◽  
Stripe Pattern ◽  
Data Set ◽  
Near Surface ◽  
Multi Scale ◽  
Topographic Data

In near-surface geophysics, ground-based mapping surveys are routinely employed in a variety of applications including those from archaeology, civil engineering, hydrology, and soil science. The resulting geophysical anomaly maps of, for example, magnetic or electrical parameters are usually interpreted to laterally delineate subsurface structures such as those related to the remains of past human activities, subsurface utilities and other installations, hydrological properties, or different soil types. To ease the interpretation of such data sets, we propose a multi-scale processing, analysis, and visualization strategy. Our approach relies on a discrete redundant wavelet transform (RWT) implemented using cubic-spline filters and the à trous algorithm, which allows to efficiently compute a multi-scale decomposition of 2D data using a series of 1D convolutions. The basic idea of the approach is presented using a synthetic test image, while our archaeo-geophysical case study from North-East Germany demonstrates its potential to analyze and process rather typical geophysical anomaly maps including magnetic and topographic data. Our vertical-gradient magnetic data show amplitude variations over several orders of magnitude, complex anomaly patterns at various spatial scales, and typical noise patterns, while our topographic data show a distinct hill structure superimposed by a microtopographic stripe pattern and random noise. Our results demonstrate that the RWT approach is capable to successfully separate these components and that selected wavelet planes can be scaled and combined so that the reconstructed images allow for a detailed, multi-scale structural interpretation also using integrated visualizations of magnetic and topographic data. Because our analysis approach is straightforward to implement without laborious parameter testing and tuning, computationally efficient, and easily adaptable to other geophysical data sets, we believe that it can help to rapidly analyze and interpret different geophysical mapping data collected to address a variety of near-surface applications from engineering practice and research.

scholarly journals A 20-year record (1998–2017) of permafrost, active layer, and meteorological conditions at a High Arctic permafrost research site (Bayelva, Spitsbergen): an opportunity to validate remote sensing data and land surface, snow, and permafrost models

2017 ◽  
Author(s):  
Julia Boike ◽  
Inge Juszak ◽  
Stephan Lange ◽  
Sarah Chadburn ◽  
Eleanor Burke ◽  
...  
Keyword(s):  
Energy Balance ◽  
High Resolution ◽  
Observational Data ◽  
Digital Elevation Model ◽  
Positive Feedback ◽  
The Arctic ◽  
Data Sets ◽  
Data Set ◽  
Digital Elevation ◽  
Elevation Model

Abstract. Most permafrost is located in the Arctic, where frozen organic carbon makes it an important component of the global climate system. Despite the fact that the Arctic climate changes more rapidly than the rest of the globe, observational data density in the region is low. Permafrost thaw and carbon release to the atmosphere are a positive feedback mechanism that can exacerbate climate warming. This positive feedback functions via changing land-atmosphere energy and mass exchanges. There is thus a great need to understand links between the energy balance, which can vary rapidly over hourly to annual time scales, and permafrost, which changes slowly over long time periods. This understanding thus mandates long-term observational data sets. Such a data set is available from the Bayelva Site at Ny-Ålesund, Svalbard, where meteorology, energy balance components and subsurface observations have been made for the last 20 years. Additional data include a high resolution digital elevation model and a panchromatic image. This paper presents the data set produced so far, explains instrumentation, calibration, processing and data quality control, as well as the sources for various resulting data sets. The resulting data set is unique in the Arctic and serves a baseline for future studies. Since the data provide observations of temporally variable parameters that mitigate energy fluxes between permafrost and atmosphere, such as snow depth and soil moisture content, they are suitable for use in integrating, calibrating and testing permafrost as a component in Earth System Models. The data set also includes a high resolution digital elevation model that can be used together with the snow physical information for snow pack modeling. The presented data are available in the supplementary material for this paper and through the PANGAEA website ( https://doi.pangaea.de/10.1594/PANGAEA.880120).

Sign in / Sign up

Export Citation Format

Share Document