scholarly journals A study to assess the energy savings potential in the ocean going trawler 'Roxana Bank'

1990 ◽  
Author(s):  
◽  
David Michael Fiddler

Increasing fuel prices have forced marine engineers and diesel engine manufacturers to look at methods of. reducing fuel consumption without a loss in output power. Engineers are always Investigating the following points: (1) decreasing the specific fuel consumption (2) enabling engines to use worse fuels ... (3) extending part load capability (4) using as much waste heat as possible. The sources of heat loss are investigated and the design of an efficient heat recovery system has been evaluated for Ideal temperature and heat conditions. after taking lnto consideration the various methods of heat recovery that are possible on the fishing trawler MFV Roxana Bank. Sources of heat loss identified by engine manufacturers are found primarily in engine cooling water and exhaust systems. These methods are investigated and extra heat transfer systems have become apparent. The use of exhaust gas boilers in diesel engine installations has become widespread as there is always a demand for heating services regardless of vessel type. The predominant form of heat transfer on the Roxana Bank is by forced convection and fluids must always remain in a turbulent state when passing through heat exchange apparatus. The introduction to heat exchangers shows that a high degree of turbulence in both primary and secondary fluids will the overall heat transfer coefficient and also reduce fouling. The design parameters of the heat recovery systems discussed as suitable for the Roxana Bank require the existing cooling water system to be scrapped and a fresh water system with one central cooler to be designed with a high temperature and a low temperature circuit together with a variable speed pump arrangement. should be fitted with such central cooling systems for a number of reasons. The central cooler system Is discussed In detail and it is shown that existing ships and/or new buildings The heat recovery system requires a certain degree of automation to prevent undercooling of the main engine systems and to maintain set Inlet and outlet temperatures to makers specifications. After attending the Roxana Bank on the 09/10 November 1989, the monitored operati~g parameters show a marked deviation to the Ideal temperatures, particularly In the cylinder cooling water circuit ... temperatures. The adverse effects these deviations have on the heat recovery and combined engine load fluctuations found on the Roxana Bank show that steady state heat recovery Is difficult to achieve on this particular type of vessel. Through calculation it Is shown that the envisaged steam turbine alternator is not practical due to the combination of low feed water inlet temperatures to the boiler and insufficient driving steam. The consequence of the reduction in electrical load on the power take off alternators have on the exhaust gas mass flow rates due to reduced engine load are also discussed. A brief mention is also made of organic fluid and thermal oil systems as a form heat recovery and possibilities for efficient heat transfer using these systems. ii Recommendations are made to Irvin and Johnson with regards to a centralised cooling system and the benefits that can be realised with regard to more efficient heat exchanger operations, but that heat recovery on the Roxana Bank from the proposed sources is not a viable proposition.

Author(s):  
Moslem Yousefi ◽  
Danial Hooshyar ◽  
Joong H Kim ◽  
Marc A Rosen ◽  
Heuiseok Lim

Nearly 30% of the input energy to a diesel engine is wasted through the exhaust gas; thus, considerable attention has been directed toward developing efficient heat recovery systems for these engines. Given the demonstrated ability of nanofluids to boost the heat transfer rate of heat exchangers, these heat transfer fluids merit consideration for use in diesel exhaust heat recovery systems. In this study, the effects of employing nanofluids on the optimum design of these systems are investigated. An existing heat diesel engine exhaust heat recovery system is modeled to work with Al2O3/water and a modified imperialist competitive algorithm is employed for the optimization. Seven variables consisting of five heat exchanger geometric characteristics together with nanoparticle volume fraction and coolant mass flow rate are considered as design variables. The heat exchanger cost and charging rate of the storage tank are optimization objectives, while the greenhouse gas savings of the heat recovery system are assessed for measuring the environmental impact of the energy recovery. The results indicate that the proposed approach can overcome the challenge of finding the near-optimal design of this complex system and using nanofluids enhances the performance of the heat recovery heat exchanger.


2021 ◽  
Vol 234 ◽  
pp. 113947
Author(s):  
Alexandre Persuhn Morawski ◽  
Leonardo Rodrigues de Araújo ◽  
Manuel Salazar Schiaffino ◽  
Renan Cristofori de Oliveira ◽  
André Chun ◽  
...  

Author(s):  
Salman Abdu ◽  
Song Zhou ◽  
Malachy Orji

Highly increased fuel prices and the need for greenhouse emissions reduction from diesel engines used in marine engines in compliance with International Maritime Organization (IMO) on the strict regulations and guidelines for the Energy Efficiency Design Index (EEDI) make diesel engine exhaust gas heat recovery technologies attractive. The recovery and utilization of waste heat not only conserves fuel, but also reduces the amount of waste heat and greenhouse gases dumped to the environment .The present paper deals with the use of exergy as an efficient tool to measure the quantity and quality of energy extracted from waste heat exhaust gases in a marine diesel engine. This analysis is utilized to identify the sources of losses in useful energy within the components of the system for three different configurations of waste heat recovery system considered. The second law efficiency and the exergy destroyed of the components are investigated to show the performance of the system in order to select the most efficient waste heat recovery system. The effects of ambient temperature are also investigated in order to see how the system performance changes with the change of ambient temperature. The results of the analysis show that in all of the three different cases the boiler is the main source of exergy destruction and the site of dominant irreversibility in the whole system it accounts alone for (31-52%) of losses in the system followed by steam turbine and gas turbine each accounting for 13.5-27.5% and 5.5-15% respectively. Case 1 waste heat recovery system has the highest exergetic efficiency and case 3 has the least exergetic efficiency.


Sign in / Sign up

Export Citation Format

Share Document