Studying adsorption of methylene blue onto chitosan – mangetite composite

2021 ◽  
Vol 11 (1) ◽  
pp. 60-66
Author(s):  
Quy Bui Minh ◽  
Oanh Do Thi ◽  
Vinh Nguyen Dinh ◽  
Linh Nguyen Thi Ngoc ◽  
Hoa Nguyen Thi Hong ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Diffraction Method ◽  
Precipitation Method ◽  
Isotherm Models ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Co Precipitation ◽  
Microscopy Techniques

The chitosan/mangetite composite in the mass ratio chitosan:mangetite of 9:1 (CM91) was synthesised by co-precipitation method. The characteristics of the chitosan/mangetite composite was estimated by X-ray diffraction method (XRD) and scanning electron microscopy techniques (SEM). The methylene blue adsorption ability onto CM91 composite was well at value pH 9, equilibrium contact time of 20 minutes. The experimental adsorption data fitted into pseudo–Langmuir adsorption isotherm models. The adsorption followed pseudo-second order kinetic model very well. The maximum adsorption capacity of that composite which caculated by Langmuir equation was 94,18 mg/g.

Removal of hexavalent chromium from aqueous solution by calcined Zn/Al-LDHs

2016 ◽  
Vol 74 (1) ◽  
pp. 229-235 ◽  
Author(s):  
Hui-Duo Yang ◽  
Yun-Peng Zhao ◽  
Shi-Feng Li ◽  
Xing Fan ◽  
Xian-Yong Wei ◽  
...  
Keyword(s):  
Hexavalent Chromium ◽  
Precipitation Method ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
X Ray Diffraction ◽  
Effects Of Ph ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Co Precipitation ◽  
Double Hydroxides

In this study, Zn/Al-layered double hydroxides (Zn/Al-LDHs) were synthesized by a co-precipitation method and characterized with X-ray diffraction, Fourier transform infrared spectroscopy, and scanning electron microscopy. Then the hexavalent chromium Cr(VI) adsorption experiments on calcined Zn/Al-LDHs were carried out to analyze the effects of pH, temperature, adsorption time, initial Cr(VI) concentration and adsorbent dosage on the removal of Cr(VI) from aqueous solutions. The maximum adsorption capacity for Cr(VI) on calcined Zn/Al-LDHs under optimal conditions was found to be over 120 mg/g. The kinetic and isotherm of Cr(VI) adsorption on calcined Zn/Al-LDHs can be described with the pseudo-second-order kinetic model and Langmuir isotherm, respectively.

Adsorption of heavy metals from aqueous solutions by Mg–Al–Zn mingled oxides adsorbent

2016 ◽  
Vol 74 (7) ◽  
pp. 1644-1657 ◽  
Author(s):  
Mona El-Sayed ◽  
Gh. Eshaq ◽  
A. E. ElMetwally
Keyword(s):  
Heavy Metals ◽  
Metal Ion ◽  
Second Order ◽  
Ion Concentration ◽  
Precipitation Method ◽  
Isotherm Models ◽  
Infrared Spectrometry ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Pseudo Second Order

In our study, Mg–Al–Zn mingled oxides were prepared by the co-precipitation method. The structure, composition, morphology and thermal stability of the synthesized Mg–Al–Zn mingled oxides were analyzed by powder X-ray diffraction, Fourier transform infrared spectrometry, N2 physisorption, scanning electron microscopy, differential scanning calorimetry and thermogravimetry. Batch experiments were performed to study the adsorption behavior of cobalt(II) and nickel(II) as a function of pH, contact time, initial metal ion concentration, and adsorbent dose. The maximum adsorption capacity of Mg–Al–Zn mingled oxides for cobalt and nickel metal ions was 116.7 mg g−1, and 70.4 mg g−1, respectively. The experimental data were analyzed using pseudo-first- and pseudo-second-order kinetic models in linear and nonlinear regression analysis. The kinetic studies showed that the adsorption process could be described by the pseudo-second-order kinetic model. Experimental equilibrium data were well represented by Langmuir and Freundlich isotherm models. Also, the maximum monolayer capacity, qmax, obtained was 113.8 mg g−1, and 79.4 mg g−1 for Co(II), and Ni(II), respectively. Our results showed that Mg–Al–Zn mingled oxides can be used as an efficient adsorbent material for removal of heavy metals from industrial wastewater samples.

scholarly journals Syringa vulgaris leaves powder a novel low-cost adsorbent for methylene blue removal: isotherms, kinetics, thermodynamic and optimization by Taguchi method

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Giannin Mosoarca ◽  
Cosmin Vancea ◽  
Simona Popa ◽  
Marius Gheju ◽  
Sorina Boran
Keyword(s):  
Methylene Blue ◽  
Low Cost ◽  
Dye Adsorption ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Adsorbent Surface ◽  
Order Kinetic Model ◽  
Endothermic Process ◽  
Pseudo Second Order ◽  
Better Than

Abstract In this study, the potential of a new low-cost adsorbent, Syringa vulgaris leaves powder, for methylene blue adsorption from aqueous solution was investigated. The adsorbent surface was examined using SEM and FTIR techniques. The experiments were conducted, in batch system, to find out the effect of pH, contact time, adsorbent dose, initial dye concentration, temperature and ionic strength on dye adsorption. The process is best described by Langmuir isotherm and the pseudo second order kinetic model. Maximum adsorption capacity, 188.2 (mg g−1), is better than other similar adsorbent materials. Thermodynamic parameters revealed a spontaneous and endothermic process, suggesting a physisorption mechanism. A Taguchi orthogonal array (L27) experimental design was used to determine the optimum conditions for the removal of dye. Various desorbing agents were used to investigate the regeneration possibility of used adsorbent. Results suggest that the adsorbent material is very effective for removal of methylene blue from aqueous solutions.

scholarly journals Polymer-Functionalized Magnetic Nanoparticles: Synthesis, Characterization, and Methylene Blue Adsorption

Materials ◽  
2018 ◽  
Vol 11 (8) ◽  
pp. 1312 ◽  
Author(s):  
Xinyu Zheng ◽  
Huaili Zheng ◽  
Rui Zhao ◽  
Yongjun Sun ◽  
Qiang Sun ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Magnetic Nanoparticles ◽  
Adsorption Capacity ◽  
Monomer Concentration ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Solution Ph ◽  
Functionalized Magnetic Nanoparticles ◽  
Order Kinetic Model ◽  
Pseudo Second Order

The removal of methylene blue (MB) from wastewater has attracted global concerns. In this study, polymer-functionalized magnetic nanoparticles for MB removal, Fe3O4@SiO2-MPS-g-AA-AMPS (FSMAA), were successfully synthesized by grafting acrylic acid (AA) and 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS) on the surface of vinyl-modified Fe3O4@SiO2. With various characterization techniques, it was confirmed that the obtained FSMAA had a core–shell structure, a good magnetic property, and plenty of functional groups on its surface. MB adsorption experiments showed that the adsorption capacity of FSMAA was notably enhanced as the grafted monomer concentration and solution pH were increased. The adsorption kinetic data and isothermal data were well described by the pseudo-second-order kinetic model and the Langmuir model, respectively. The maximum adsorption capacity of FSMAA was 421.9 mg g−1 with grafted monomer concentration at 2.0 mol L−1 and solution pH at 9, much higher than those of other adsorbents stated in previous literatures. Based on XPS analysis, surface adsorption mechanism between FSMAA and MB was electrostatic interaction, hydrogen bonding, and hydrophobic interaction. Furthermore, FSMAA was effectively regenerated by acid pickling, and the remaining adsorption capacity was more than 60% after eight adsorption–regeneration cycles. All the results demonstrated the self-made FSMAA was a desirable adsorbent to remove MB from wastewater.

Preparation of novel porous Al2O3-SiO2 nanocomposites via solution-freeze-drying-calcination method for the efficient removal of uranium in solution

2021 ◽  
Author(s):  
Maoling Wu ◽  
Ling Ding ◽  
Jun Liao ◽  
Yong Zhang ◽  
Wenkun Zhu
Keyword(s):  
Adsorption Process ◽  
Interaction Mechanism ◽  
Isotherm Models ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Calcination Method ◽  
Adsorption Desorption

Abstract In this work, the efficient extraction of uranium in solution using Al2O3-SiO2-T was reported. Kinetics and isotherm models indicated that the removal process of uranium onAl2O3-SiO2-T accorded with pseudo-second-order kinetic model and Langmuir isotherm model, which showed that the adsorption process was a uniform mono-layer chemical behavior. The maximum adsorption capacity of Al2O3-SiO2-T reached 738.7 mg g-1, which was higher than AlNaO6Si2 (349.8 mg g-1) and Al2O3-SiO2-NT (453.1 mg g-1), indicating that the addition of template could effectively improve the adsorption performance of Al2O3-SiO2 to uranium. Even after five cycles of adsorption-desorption, the removal percentage of uranium on Al2O3-SiO2-T remained 96%. Besides, the extraction efficiency of uranium on Al2O3-SiO2-T was 72.5% in simulated seawater, which suggested that the Al2O3-SiO2-T was expected to be used for uranium extraction from seawater. Further, the interaction mechanism between Al2O3-SiO2-T and uranium species was studied. The results showed that the electrostatic interaction and complexation played key roles in the adsorption process of Al2O3-SiO2-T to uranium.

scholarly journals Enhanced Performance of Chitosan via a Novel Quaternary Magnetic Nanocomposite Chitosan/Grafted Halloysitenanotubes@ZngFe3O4 for Uptake of Cr (III), Fe (III), and Mn (II) from Wastewater

Polymers ◽  
2021 ◽  
Vol 13 (16) ◽  
pp. 2714
Author(s):  
Mahmoud F. Mubarak ◽  
Ahmed H. Ragab ◽  
Rasha Hosny ◽  
Inas A. Ahmed ◽  
Hanan A. Ahmed ◽  
...  
Keyword(s):  
Metal Ions ◽  
High Efficiency ◽  
Precipitation Method ◽  
High Electron ◽  
Order Kinetic ◽  
Equilibrium System ◽  
Adsorption Removal ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Co Precipitation

A novel chitosan/grafted halloysitenanotubes@Zngmagnetite quaternary nanocomposite (Ch/g-HNTs@ZngM) was fabricated using the chemical co-precipitation method to remove the ions of Cr (III), Fe (III), and Mn (II) from wastewater. The characteristics of the synthesized Ch/g-HNTs@ZngM quaternary nanocomposite were investigated using FTIR, SEM, XRD, GPC, TGA, TEM, and surface zeta potential. The characterization analysis proved that the mentioned nanocomposite structure contains multiple functional groups with variable efficiencies. Additionally, they proved the existence of magnetic iron in the nanocomposite internal structure with the clarity of presentation of gaps and holes of high electron density on its surface. The results showed that the pH and time to reach an equilibrium system for all the studied metal ions were obtained at 9.0 and 60 min, respectively. The synthesized Ch/g-HNTs@ZngM nanocomposite exhibited maximum adsorption removal of 95.2%, 99.06%, and 87.1% for Cr (III), Fe (III), and Mn (II) ions, respectively. The pseudo-second-order kinetic model and, for isotherm, the Langmuir model were best fitted with the experimental data. The thermodynamic parameters indicated the exothermic and spontaneous nature of the adsorption reaction as proven by the ΔH° and ΔG° values. Additionally, chemical adsorption by the coordination bond is supposed as the main mechanism of adsorption of the mentioned metal ions on the nanocomposite. Finally, Ch/g-HNTs@ZngM displays prospected advantages, such as a low-expense adsorbent, high efficiency and availability, and an eco-friendly source, that will reduce the environmental load via an environmentally friendly method.

scholarly journals Comparative Biosorption Studies of Hexavalent Chromium Ion onto Raw and Modified Palm Branches

2013 ◽  
Vol 2013 ◽  
pp. 1-9 ◽  
Author(s):  
Mona A. Shouman ◽  
Nady A. Fathy ◽  
Soheir A. Khedr ◽  
Amina A. Attia
Keyword(s):  
Adsorption Process ◽  
Isotherm Models ◽  
Ammonium Bromide ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Chemically Modified ◽  
Chromium Vi ◽  
Adsorption Data ◽  
Order Kinetic Model ◽  
Pseudo Second Order

The waste of palm branches (PB) was tested for its ability to remove chromium (VI) from aqueous solution by batch and column experiments. Palm branches chemically modified with an oxidizing agent (sulphuric acid) then coated with chitosan and surfactant (hexadecyl trimethyl ammonium bromide surfactant, HDTMA), respectively, were carried out to improve the removal performance of PB. The results of their Cr (VI) removal performances are pH dependent. The adsorption data could be well interpreted by the Langmuir, Freundlich, and Flory-Huggins isotherm models. The maximum adsorption capacity obtained from the Langmuir model for the chitosan coated oxidized palm branches is 55 mg/mg. The adsorption process could be described by pseudo-second-order kinetic model. The intraparticle diffusion study revealed that film diffusion might be involved. The biosorbents were successfully regenerated using 1 M HCL solution.

Removal of Disperse Red 60 dye from aqueous solution using free and composite fungal biomass of Lentinus concinnus

2016 ◽  
Vol 75 (2) ◽  
pp. 366-377 ◽  
Author(s):  
Gülay Bayramoğlu ◽  
V. Cengiz Ozalp ◽  
M. Yakup Arıca
Keyword(s):  
Aqueous Solution ◽  
Fungal Biomass ◽  
Adsorption Equilibrium ◽  
Isotherm Models ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Composite Beads ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Carboxyl Derivative

Lentinus concinnus biomass was immobilized to carboxyl derivative of cellulose, carboxymethyl cellulose (CMC), in the presence of FeCl3 (0.1 mol L−1) via ionic cross-linking. The beads containing immobilized fungal biomass were incubated at 30 °C for three days to permit growth of the fungus. The free and immobilized fungal biomass were tested for adsorption of Disperse Red 60 (DR-60) from aqueous solution using bare CMC beads as a control system. The maximum adsorption of DR-60 on the free and immobilized fungal biomass was observed at pH 6.0. The adsorption of DR-60 by the free, and immobilized fungal biomass increased as the initial concentration of DR-60 in the medium increased up to 100 mg/L. The maximum adsorption capacity of the CMC beads, the free and immobilized fungal biomass (i.e. composite beads) were found to be 43.4, 65.7, and 92.6 mg g−1 dry sorbents, respectively. The equilibrium of the adsorption system was well described by Langmuir and Temkin isotherm models. Adsorption equilibrium was established in about 1.0 h. The adsorption of DR-60 on the fungal preparations followed pseudo-second-order kinetic model. It was observed that the immobilized fungal biomass has a high potential for the removal of DR-60 as a model dye from aqueous solution.

Adsorption Characteristics of Phenol in Aqueous Solution by Pinus massoniana Biochar

2013 ◽  
Vol 295-298 ◽  
pp. 1154-1160 ◽  
Author(s):  
Guo Zhi Deng ◽  
Xue Yuan Wang ◽  
Xian Yang Shi ◽  
Qian Qian Hong
Keyword(s):  
Aqueous Solution ◽  
Ph Value ◽  
Pinus Massoniana ◽  
Isotherm Models ◽  
Order Kinetic ◽  
Adsorbent Dosage ◽  
Salt Ions ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Pseudo Second Order

The objective of this paper is to investigate the feasibility of phenol adsorption from aqueous solution by Pinus massoniana biochar. Adsorption conditions, including contact time, initial phenol concentration, adsorbent dosage, strength of salt ions and pH, have been investigated by batch experiments. Equilibrium can be reached in 24 h for phenol from 50 to 250 mg• L-1. The optimum pH value for this kind of biochar is 5.0. The amount of phenol adsorbed per unit decreases with the increase in adsorbent dosage. The existence of salt ions makes negligible influence on the equilibrium adsorption capacity. The experimental data is analyzed by the Freundlich and Langmuir isotherm models. Equilibrium data fits well to the Freundlich model. Adsorption kinetics models are deduced and the pseudo-second-order kinetic model provides a good correlation for the adsorbent process. The results show that the Pinus massoniana biochar can be utilized as an effective adsorption material for the removal of phenol from aqueous solution.

scholarly journals Insights into Starch Coated Nanozero Valent Iron-Graphene Composite for Cr(VI) Removal from Aqueous Medium

2016 ◽  
Vol 2016 ◽  
pp. 1-10 ◽  
Author(s):  
Prasanna Kumarathilaka ◽  
Vimukthi Jayaweera ◽  
Hasintha Wijesekara ◽  
I. R. M. Kottegoda ◽  
S. R. D. Rosa ◽  
...  
Keyword(s):  
Point Of Zero Charge ◽  
Inert Material ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
X Ray Diffraction ◽  
Graphene Composite ◽  
Removal Capacity ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
First Time

Embedding nanoparticles into an inert material like graphene is a viable option since hybrid materials are more capable than those based on pure nanoparticulates for the removal of toxic pollutants. This study reports for the first time on Cr(VI) removal capacity of novel starch stabilized nanozero valent iron-graphene composite (NZVI-Gn) under different pHs, contact time, and initial concentrations. Starch coated NZVI-Gn composite was developed through borohydrate reduction method. The structure and surface of the composite were characterized by scanning electron microscopy (SEM), X-ray diffraction spectroscopy (XRD), Fourier transform infrared spectroscopy (FTIR), Brunauer-Emmett-Teller (BET), and point of zero charge (pHpzc). The surface area and pHpzc of NZVI-Gn composite were reported as 525 m2 g−1 and 8.5, respectively. Highest Cr(VI) removal was achieved at pH 3, whereas 67.3% was removed within first few minutes and reached its equilibrium within 20 min obeying pseudo-second-order kinetic model, suggesting chemisorption as the rate limiting process. The partitioning of Cr(VI) at equilibrium is perfectly matched with Langmuir isotherm and maximum adsorption capacity of the NZVI-Gn composite is 143.28 mg g−1. Overall, these findings indicated that NZVI-Gn composite could be utilized as an efficient and magnetically separable adsorbent for removal of Cr(VI).

Sign in / Sign up

Export Citation Format

Share Document