scholarly journals Comparative Analysis of Machining Characteristics of EDM and ECM during Machining of Ti-6Al-4V

2021 ◽  
Vol 23 (2) ◽  
Author(s):  
Banwait S.S. ◽  
◽  
Sanjay S ◽  
Keyword(s):  
Surface Roughness ◽  
Material Removal Rate ◽  
Electric Discharge ◽  
Material Removal ◽  
Removal Rate ◽  
Electric Discharge Machining ◽  
Pulse On Time ◽  
Surface Finish Effect ◽  
Machining Characteristics

The present work explains the machining of Titanium alloy using Electric Discharge Machining & Electro-Chemical Machining. This work aims to analyze the role of Current, Pulse on Time, Voltage and hence optimize the Material Removal Rate and Surface Roughness in Electric Discharge Machining. In the same way, it also aims to analyze the role of Concentration, Feed, and Voltage and optimize the Material Removal Rate and Surface Roughness in Electro-Chemical Machining. The various approaches like Taguchi & Analysis of Variance are executed to study the performance characteristics of the input parameters on the output parameters. The whole work is followed by a validation test and hence confirming the obtained values. Thus, it reveals the acceptability of the model. The work tells that Material Removal Rate and Surface Finish effect is more in Electro-Chemical Machining as compared to Electric Discharge Machining. For Material Removal Rate, Current and Feed are more responsible parameters for Electric Discharge Machining. In the same way; electrolyte concentration and Feed are more responsible parameters for Electro-Chemical Machining respectively.

Nano Graphite Powder Assisted Electric Discharge Machining Characteristics of ZM21 Magnesium Alloy

2015 ◽  
Vol 787 ◽  
pp. 406-410
Author(s):  
S. Santosh ◽  
S. Javed Syed Ibrahim ◽  
P. Saravanamuthukumar ◽  
K. Rajkumar ◽  
K.L. Hari Krishna
Keyword(s):  
Magnesium Alloy ◽  
Material Removal Rate ◽  
Electric Discharge ◽  
Material Removal ◽  
Removal Rate ◽  
Machining Parameters ◽  
Electric Discharge Machining ◽  
Zm21 Magnesium Alloy ◽  
Pulse On Time ◽  
Pulse Off Time

Magnesium alloys are used in many applications, particularly in orthopaedic implants are very difficult to machine by conventional processes because of their complex 3D structure and limited slip system at room temperature. Hence there is an inherent need for alternative processes for machining such intricate profiles. Electric Discharge Machining is growing rapidly in tool rooms, die shops and even in general shop floors of modern industries to facilitate complex machining for difficult-to-machine materials and provide better surface integrity. Therefore, the use of electric discharge machining on ZM21 magnesium alloy is attempted in this paper. Nanographite powder is added for machining zone to enhance the electrical conductivity of EDM oil by way it improves the machining performance. Machining parameters such as the current, pulse on time and pulse off time were process parameters to explore their effects on the material removal rate and tool wear rate. It is observed that, an increased material removal rate was due to the enhanced electrical and thermal conductivity of the EDM oil.

Optimization of Electric Discharge Machining Parameters of Al-7%Si-4%Mg with 20% of Red Mud Metal Matrix Composites

2014 ◽  
Vol 941-944 ◽  
pp. 1973-1976
Author(s):  
B. Geetha ◽  
K. Ganesan
Keyword(s):  
Surface Roughness ◽  
Wear Rate ◽  
Tool Wear ◽  
Material Removal Rate ◽  
Electric Discharge ◽  
Material Removal ◽  
Removal Rate ◽  
Tool Wear Rate ◽  
Peak Current ◽  
Pulse On Time

An investigation was carried out to find out the influence of process parameters on surface roughness (SR) and material removal rate (MRR) in electric discharge machine of Al-7%Si-4%Mg with 20% of red mud Metal Matrix Composites since electric discharge machining is a thermo-electric machining process, an electronic die sinking electric discharge machine was used to drill holes in the composite work piece, copper is used as tool material. Experiment was carried out to find surface roughness, material removal rate and tool wear rate by varying the peak current, flushing pressure of dielectric fluid and pulse on time. It was found that the surface roughness of composite metal increases with the increase peak current ,pulse on time and flushing pressure due larger and deeper craters on the drilled surface. It was also found that there was increase in metal removal rate with the increase in peak current and flushing pressure and slightly decreases with the increase in pulse on time due carbon deposits on the electrodes. Experimental analysis is carried using Taguchi’s Design of Experiment method with various parameters like peak current, flushing pressure of dielectric fluid and pulse on time to identify the key factors that influence the surface roughness, material removal rate and tool wear rate. It was found that the peak current was the most significant parameter that influences surface roughness, material removal rate and tool wear rate. The Taguchi experiments results confirm the actual results obtained from the numerical calculation.

scholarly journals Multi-Objective Optimization of Aluminium Powder-mixed EDM process using GRA and TOPSIS Technique based on Fuzzy AHP approach

2021 ◽  
Vol 19 (5) ◽  
pp. 437-447
Author(s):  
Fahad Kazi ◽  
C.A Waghmare ◽  
M.S Sohani
Keyword(s):  
Material Removal Rate ◽  
Electric Discharge ◽  
Material Removal ◽  
Removal Rate ◽  
Fuzzy Ahp ◽  
Dielectric Fluid ◽  
Work Piece ◽  
Electric Discharge Machining ◽  
Aluminium Powder ◽  
Pulse On Time

Electric discharge machining is an advanced machining technique. Spark is initiated between the tool and work piece interface which has a gap between them. Low material removal rate as well as low surface finish is a major concern of this process. Therefore, Powder mixed electric discharge machining is developed. In PMEDM process, powders like silicon, aluminium, chromium, manganese, etc. are circulated along with dielectric fluid in a particular proportion. In this present study, aluminium powder is mixed in the dielectric fluid. The responses such as material removal rate, tool wear rate and surface roughness are measured by considering current, pulse on time and aluminium powder concentration as process parameters. Response surface methodology along with Fuzzy AHP TOPSIS and Grey relational analysis are used for optimization.

scholarly journals Synthesis and Characterization of Mechanical Properties and Wire Cut EDM Process Parameters Analysis in AZ61 Magnesium Alloy + B4C + SiC

Materials ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3689
Author(s):  
Thanikodi Sathish ◽  
Vinayagam Mohanavel ◽  
Khalid Ansari ◽  
Rathinasamy Saravanan ◽  
Alagar Karthick ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Magnesium Alloy ◽  
Process Parameters ◽  
Material Removal Rate ◽  
Electric Discharge ◽  
Material Removal ◽  
Removal Rate ◽  
Stir Casting ◽  
Electric Discharge Machining ◽  
Az61 Magnesium Alloy

Wire Cut Electric Discharge Machining (WCEDM) is a novel method for machining different materials with application of electrical energy by the movement of wire electrode. For this work, an AZ61 magnesium alloy with reinforcement of boron carbide and silicon carbide in different percentage levels was used and a plate was formed through stir casting technique. The process parameters of the stir casting process are namely reinforcement %, stirring speed, time of stirring, and process temperature. The specimens were removed from the casted AZ61 magnesium alloy composites through the Wire Cut Electric Discharge Machining (WCEDM) process, the material removal rate and surface roughness vales were carried out creatively. L 16 orthogonal array (OA) was used for this work to find the material removal rate (MRR) and surface roughness. The process parameters of WCEDM are pulse on time (105, 110, 115 and 120 µs), pulse off time (40, 50, 60 and 70 µs), wire feed rate (2, 4, 6 and 8 m/min), and current (3, 6, 9 and 12 Amps). Further, this study aimed to estimate the maximum ultimate tensile strength and micro hardness of the reinforced composites using the Taguchi route.

scholarly journals An Experimental Investigation on the Material Removal Rate and Surface Roughness of a Hybrid Aluminum Metal Matrix Composite (Al6061/SiC/Gr)

Metals ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 1449
Author(s):  
Mandeep Singh ◽  
Sthitapragyan Maharana ◽  
Anchal Yadav ◽  
Rasmeet Singh ◽  
Pragyansu Maharana ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Metal Matrix Composite ◽  
Material Removal Rate ◽  
Electric Discharge ◽  
Metal Matrix ◽  
Material Removal ◽  
Removal Rate ◽  
Electric Discharge Machining ◽  
Aluminum Metal ◽  
Aluminum Metal Matrix Composite

The objective of this paper was to determine the optimum process parameters of an electric discharge machine while machining a new hybrid aluminum metal matrix composite. In this study, a new hybrid aluminum metal matrix composite was prepared, with silicon carbide and graphite particles used as reinforcements, with the help of the stir casting method. The selected electric discharge machining parameters in this study were peak current (I), voltage (V), pulse-on time (Ton), and tool material, while the response parameters were material removal rate and surface roughness. To machine the fabricated samples, two different types of tool materials (copper and brass) were used as electric discharge machine electrodes, and each had a diameter (Ø) of 12.0 mm. The optimal settings of the electric discharge machining parameters were determined through experiments planned, conducted, and analyzed using the Taguchi (L18) technique. An analysis of variance and confirmatory tests were used to check the contribution of each machining parameter. It was found that the material removal rate increased with the increase in pulse-on time and pulse current, whereas the material removal rate decreased with the increase in voltage. On the other hand, reduced surface roughness could only be achieved when current, voltage, and pulse duration were low. It was also found that the selected electric discharge machining electrodes had a significant effect on both the material removal rate and the surface roughness.

Machining performance of cryogenically treated Ti–5Al–2.5Sn titanium alloy in electric discharge machining: A comparative study

2016 ◽  
Vol 231 (11) ◽  
pp. 2017-2024 ◽  
Author(s):  
Sanjeev Kumar ◽  
Ajay Batish ◽  
Rupinder Singh ◽  
TP Singh
Keyword(s):  
Titanium Alloy ◽  
Material Removal Rate ◽  
Electric Discharge ◽  
Material Removal ◽  
Removal Rate ◽  
Cryogenic Treatment ◽  
Machining Performance ◽  
Electric Discharge Machining ◽  
Machined Surface ◽  
Pulse On Time

In the present study, the effect of cryogenic treatment on the machining performance of Ti–5Al–2.5Sn alpha titanium alloy was investigated during electric discharge machining. Untreated, shallow cryogenically treated (−110 ℃), and deep cryogenically treated (−184 ℃) titanium alloys were machined by varying current and pulse-on-time. The machining performance was measured in terms of higher material removal rate and microhardness and low tool wear rate and surface roughness. The results showed a significant improvement in the machining performance with deep cryogenically treated alloy when compared with shallow and untreated alloy. Current and pulse-on-time also affected the machinability of titanium alloy. Higher material removal rate and microhardness were observed when titanium alloy was machined at high current and pulse-on-time. During machining, carbon was deposited on the machined surface due to the breakdown of hydrocarbon dielectric at high temperature thereby, affecting its properties.

Enhancement of EDM Performance by Using Copper-Silver Composite Electrode

2020 ◽  
Vol 38 (9A) ◽  
pp. 1352-1358
Author(s):  
Saad K. Shather ◽  
Abbas A. Ibrahim ◽  
Zainab H. Mohsein ◽  
Omar H. Hassoon
Keyword(s):  
Surface Roughness ◽  
Material Removal Rate ◽  
Material Removal ◽  
High Speed ◽  
Composite Electrode ◽  
Removal Rate ◽  
Pure Copper ◽  
High Speed Steel ◽  
Pulse On Time ◽  
Pulse Off Time

Discharge Machining is a non-traditional machining technique and usually applied for hard metals and complex shapes that difficult to machining in the traditional cutting process. This process depends on different parameters that can affect the material removal rate and surface roughness. The electrode material is one of the important parameters in Electro –Discharge Machining (EDM). In this paper, the experimental work carried out by using a composite material electrode and the workpiece material from a high-speed steel plate. The cutting conditions: current (10 Amps, 12 Amps, 14 Amps), pulse on time (100 µs, 150 µs, 200 µs), pulse off time 25 µs, casting technique has been carried out to prepare the composite electrodes copper-sliver. The experimental results showed that Copper-Sliver (weight ratio70:30) gives better results than commonly electrode copper, Material Removal Rate (MRR) Copper-Sliver composite electrode reach to 0.225 gm/min higher than the pure Copper electrode. The lower value of the tool wear rate achieved with the composite electrode is 0.0001 gm/min. The surface roughness of the workpiece improved with a composite electrode compared with the pure electrode.

Sign in / Sign up

Export Citation Format

Share Document