Effects of Loading Spectra on High pH Crack Growth Behavior of X65 Pipeline Steel

CORROSION ◽  
10.5006/3472 ◽  
2020 ◽  
Vol 76 (6) ◽  
pp. 601-615 ◽  
Author(s):  
Hamid Niazi ◽  
Karina Chevil ◽  
Erwin Gamboa ◽  
Lyndon Lamborn ◽  
Weixing Chen ◽  
...  
Keyword(s):  
Free Surface ◽  
Crack Initiation ◽  
Crack Propagation ◽  
Strain Rate ◽  
Crack Growth ◽  
Pipeline Steel ◽  
Crack Tip ◽  
Growth Behavior ◽  
Crack Growth Behavior ◽  
Secondary Crack

The effects of mechanical factors on crack growth behavior during the second stage of high pH stress corrosion cracking in pipeline steel were investigated by applying several loading scenarios on compact tension (CT) specimens. The main mechanism for stage 2 of intergranular crack propagation is anodic dissolution ahead of the crack tip which is highly dependent on crack-tip strain rate. The maximum and minimum crack growth rates were 3 × 10−7 mm/s and 1 × 10−7 mm/s, respectively. It was observed that several factors such as mean stress intensity factor, amplitude, and frequency of loading cycles determine the crack-tip strain rate. Low R-ratio cycles, particularly high-frequency ones, enhance secondary crack initiation, and crack coalescence on the free surface. This mechanism accelerates crack advance on the free surface which is accompanied with an increase in mechanical driving force for crack propagation in the thickness direction. These findings have implications for pipeline operators and could be used to increase the lifespan of the cracked pipelines at stage 2. For those pipelines, any loading condition that increases the strain rate ahead of the crack tip enhances anodic dissolution and is detrimental. Additionally, secondary crack initiation and coalescence could be minimized by avoiding internal pressure fluctuation, particularly rapid large pressure fluctuations.

Environmental Effect of Crack Growth Rate of Pipeline Steel in Near-Neutral pH Soil Environments

2004 ◽  
Author(s):  
Weixing Chen ◽  
Robert Sutherby
Keyword(s):  
Growth Rate ◽  
Crack Growth Rate ◽  
Crack Growth ◽  
Soil Chemistry ◽  
Pipeline Steel ◽  
Crack Tip ◽  
Growth Behavior ◽  
Crack Growth Behavior ◽  
General Corrosion ◽  
Neutral Ph

The laboratory work reported here was initiated to determine whether different soils can be shown to give rise to different growth rate for a given pipeline steel. Two soil synthetic environments with different near neutral pH value were designed based on various soil chemistries collected near the pipeline in the field where near-neutral pH SCC was found. The crack growth behavior in both the environments were determined using compact tension specimen. The crack growth rate was in situ monitored by the potential drop system. It was found that soil chemistry has a profound effect on crack growth rate. Although it is insensitive to the soil chemistry and cyclic frequency, the crack growth rate in the high ΔK regime has been significantly enhanced in comparison with that in air. In the low ΔK regime, the growth rate is shown to have minor dependence on ΔK value but strong dependence on the testing environments. The observed crack growth behavior in different ΔK regimes and environments was related to the crack tip sharpness and crack crevice wideness as a result of corrosion and room temperature creep deformation. Soil solutions with low general corrosion rate are associated with a blunt crack tip and wide crack crevice, which would result in lower stress intensity at the crack tip and weaker crack closure effect, respectively. Similarly, a loading wave allowing shorter creep time on a given volume of material at the crack tip at high loading stress tends to produce a sharper crack tip and narrow crack crevice. These two factors have opposite effect on crack growth rate, and the observed crack growth rate reflects the combined effect of these two opposite factors.

Fatigue Crack Growth Behavior of Autofrettaged Hydrogen Pressure Vessel Made of Low Alloy Steel

2017 ◽  
Author(s):  
Yoru Wada ◽  
Yusuke Yanagisawa
Keyword(s):  
High Pressure ◽  
Fatigue Crack ◽  
Fatigue Crack Growth ◽  
Crack Propagation ◽  
Crack Growth ◽  
Cylindrical Specimen ◽  
Growth Behavior ◽  
Gaseous Hydrogen ◽  
Crack Growth Behavior ◽  
Low Alloy Steel

Autofrettage is used to known as an effective method to prevent fatigue crack propagation of thick-walled cylinder vessels operating under high pressure. Since low-alloy steel shows an enhanced crack growth rate in high-pressure gaseous hydrogen, this paper aims to validate the effect of autofrettage on crack growth behavior in high-pressure gaseous hydrogen utilizing 4%NiCrMoV steel (SA723 Gr3 Class2). An autofrettaged cylindrical specimen with a 70mm inside diameter and 111mm outside diameter was prepared with an axial EDM (depth of 1mm) notched on the inside surface. The measured residual stress profile coincides well with the calculated results. The fatigue crack growth test was conducted by pressurizing the cylinder and varying the external water pressure. Crack propagation from the EDM notch was observed in the non-autofrettaged cylindrical specimen while no crack propagation was observed when the initial EDM notch size was within the compressive residual stress field. When the initial EDM notch size was increased, the fatigue crack growth showed a narrow, groove-like fracture surface for the autofrettaged specimen. In order to qualitatively analyze those results, fatigue crack growth rates were examined under various load ratios including a negative load ratio using a fracture mechanics specimen. From the information obtained, crack growth analysis of an autofrettaged cylinder in a high-pressure hydrogen environment was successfully demonstrated with a fracture mechanics approach.

Study on the Influence of Crack Growth Behavior on Fatigue Life in Simulated Reactor Coolant Environment of Different Temperature

2020 ◽  
Author(s):  
Tatsuru Misawa ◽  
Takanori Kitada ◽  
Takao Nakamura
Keyword(s):  
High Temperature ◽  
Fatigue Life ◽  
Crack Propagation ◽  
Crack Growth ◽  
Crack Propagation Rate ◽  
Propagation Rate ◽  
Growth Behavior ◽  
Crack Growth Behavior ◽  
Reactor Coolant ◽  
Different Temperatures

Abstract It has been clarified that the fatigue life is decreased in the fatigue test of high-temperature and high-pressure water that simulates PWR reactor coolant environment compared to that in the atmosphere. Temperature, strain rates, dissolved oxygen concentration, etc. affect the decrease of fatigue life. The influence of crack growth behavior on the fatigue life of Type 316 austenitic stainless steel [1] in simulated PWR reactor coolant environment of different temperatures was investigated in this study. Fatigue tests were conducted under different temperatures (200°C and 325°C) in a simulated PWR reactor coolant environment with interrupting, and cracks generated on the specimen surface were observed with two-step replica method. From the results of observation, the influence of crack growth behavior in different temperatures on the fatigue life was clarified. As a result, it was confirmed that the decrease of the fatigue life due to high temperature is mainly caused by the acceleration of crack propagation rate in the depth direction by the increase of crack coalescence frequency due to the increase of crack initiation number and crack propagation rate in the length direction.

Crack Growth Characteristics of Pure Copper for Smart Stress Memory Patch

2007 ◽  
Vol 353-358 ◽  
pp. 2045-2048
Author(s):  
Shoichi Nambu ◽  
Manabu Enoki
Keyword(s):  
Crack Propagation ◽  
Crack Length ◽  
Crack Growth ◽  
Stress Amplitude ◽  
Pure Copper ◽  
Growth Behavior ◽  
Growth Characteristics ◽  
Crack Growth Behavior ◽  
Stress Memory ◽  
The Relationship

A new sensing method called “smart stress memory patch”, which could estimate the maximum stress, the stress amplitude and the fatigue cyclic number simultaneously using Kaiser effect of Acoustic Emission (AE) and crack length of this patch, was developed. In this study, the crack growth characteristics of this patch was evaluated. Pure copper was used for this patch because its good corrosion resistance, stable crack propagation and so on. Two kinds of samples which were rolled and electrodeposited copper were prepared to investigate the effect of microstructure on crack growth behavior. Fatigue test was performed under constant stress amplitude to evaluate the crack growth behavior using the relationship between stress intensity factor range and crack propagation rate. The scattering in fatigue crack growth was also investigated to obtain the relationship between crack length and the fatigue cyclic number including two-sided 95% confidence interval. The effect of thickness and grain size on the scattering was discussed. Finally, good crack growth behavior was obtained and the fatigue cyclic number could be estimated by this patch.

scholarly journals An Integral Formulation of Two-Parameter Fatigue Crack Growth Model

2018 ◽  
Vol 2018 ◽  
pp. 1-12
Author(s):  
Jianguo Wu ◽  
Shan Jiang ◽  
Wei Zhang ◽  
Zili Wang
Keyword(s):  
Fatigue Crack ◽  
Fatigue Crack Growth ◽  
Crack Propagation ◽  
Crack Growth ◽  
Crack Closure ◽  
Crack Tip ◽  
Integral Form ◽  
Crack Growth Behavior ◽  
Crack Growth Model ◽  
Two Parameter

A two-parameter fatigue crack growth algorithm in integral form is proposed, which can describe the continuous crack growth process over the time period. In this model, the fatigue crack propagation behavior is governed by the temporal crack-tip state including the current applied load and the physical condition due to the previous load sequence. The plasticity-induced crack closure, left by the historical loading sequence, controls the following fatigue crack growth behavior and typically leads to the interaction effects. In the proposed method, a modified crack closure model deriving from the local plastic deformation is employed to account for this load memory effect. In general, this model can simulate the fatigue crack growth under variable amplitude loading. Additionally, this model is established on the physical state of crack tip in the small spatial and temporal scale, and it is used to evaluate the macroscopic crack propagation and fatigue life under irregular tension-tension loading. A special superimposed loading case is discussed to demonstrate the advantage of the proposed model, while the traditional two-parameter approach is not proper functional. Moreover, the typical various load spectra are also employed to validate the method. Good agreements are observed.

scholarly journals Effect of pH Value on the Crack Growth Behavior of X70 Pipeline Steel in the Dilute Bicarbonate Solutions

2015 ◽  
Vol 56 (6) ◽  
pp. 777-780 ◽  
Author(s):  
Zhongyu Cui ◽  
Zhiyong Liu ◽  
Liwei Wang ◽  
Cuiwei Du ◽  
Xiaogang Li
Keyword(s):  
Crack Growth ◽  
Ph Value ◽  
Pipeline Steel ◽  
Growth Behavior ◽  
Crack Growth Behavior ◽  
Effect Of Ph ◽  
X70 Pipeline Steel ◽  
Bicarbonate Solutions
Sign in / Sign up

Export Citation Format

Share Document