Effect of Long-Term Service Exposure on the Localized Corrosion and Stress Corrosion Cracking Susceptibility of Type 347 Stainless Steel

The paper presents the results of a study conducted on the effects of long-term service exposure of Type 347 stainless steel (SS) on the microstructure and corrosion susceptibility. The material subjected to the study was in service in a petroleum refinery as heater tube at 620°C for 31 years. The microscopic and x-ray diffraction studies of the service-exposed specimen revealed the precipitation of chromium-rich carbides along the grain boundaries. The microstructural changes that occurred as a result of service exposure affected the ductility and toughness of the alloy. The sensitization of the alloy was assessed by scanning electron microscopy and double loop electrochemical potentiodynamic reactivation. The studies have indicated some degree of sensitization in the alloy. The service exposure resulted in a marginal increase in the susceptibility of Type 347 SS to pitting in environments containing NaCl and NaCl + H2S. Environments such as H2SO4 and K2S4O6 at the tested concentrations did not differentiate between service-exposed and solution annealed specimens for their corrosion susceptibility. Slow strain rate testing of Type 347 SS in both the service-exposed and solution annealed conditions showed susceptibility to stress corrosion cracking in environment containing NaCl + H2S, while the alloy did not show susceptibility to SCC in H2SO4 and K2S4O6. The long-term service exposure did not noticeably influence the SCC susceptibility of Type 347 SS under the tested conditions.