Electrochemical Studies on Corrosion Behavior of Austenitic Stainless Steel Weld and Clad Metals

CORROSION ◽  
1985 ◽  
Vol 41 (4) ◽  
pp. 234-242 ◽  
Author(s):  
K. Prasad Rao ◽  
S. Prasannakumar
Keyword(s):  
Stainless Steel ◽  
Austenitic Stainless Steel ◽  
Corrosion Behavior ◽  
Electrochemical Studies ◽  
Steel Weld ◽  
Stainless Steel Weld ◽  
Clad Metals ◽  
Austenitic Stainless Steel Weld

Effect of Small Amount of Bismuth on Corrosion Resistibility of Austenitic Stainless Steel Weld Metals

2002 ◽  
Author(s):  
Yasuhiro Hara ◽  
Keisuke Shiga ◽  
Nobuo Nakazawa
Keyword(s):  
Stainless Steel ◽  
Austenitic Stainless Steel ◽  
Weld Metal ◽  
Corrosion Behavior ◽  
Arc Welding ◽  
Steel Weld ◽  
Weld Metals ◽  
Stainless Steel Weld ◽  
Austenitic Stainless Steel Weld ◽  
Welding Processes

Flux-cored are welding (FCAW) has increased recently because of high welding efficiency. However, a small amount of bismuth in the weld metals was a residue from the flux component that was added for improving slag detachability. The effect of small amount of bismuth in austenitic stainless steel weld metal on corrosion behavior in wet corrosion environment is not adequately clear because there is little reported to date. In the present research, the effect of bismuth which remained in the weld metal on the corrosion behavior of 308-type weld metal in wet corrosive solution was examined by using different bismuth containing weld metal. Measurement of the anodic polarization curve in a sulfuric acid solution, determination of pitting potential and conducting stress corrosion cracking (SCC) tests in a chloride solution, and implementation of boiling nitric add solution tests were conducted. In addition, the corrosion behavior of the FCAW weld metal was compared with that of Bi-free weld metals by shielded metal arc welding (SMAW) and gas tungsten arc welding (GTAW) to clarify how the corrosion behavior varies between the welding processes. In this research, no noticeable adverse effect of bismuth remained in the 308-type austenitic FCAW weld metals was observed in corrosion test.

Numerical Simulation and Experimental Investigation of Residual Stress in 06Cr19Ni10 Austenitic Stainless Steel Weld Joint with Effects of Strain-Strengthening

2016 ◽  
Vol 853 ◽  
pp. 204-208 ◽  
Author(s):  
Lan Qing Tang ◽  
Hui Fang Li ◽  
Xiao Xiao Wang ◽  
Cai Fu Qian
Keyword(s):  
Residual Stress ◽  
Stainless Steel ◽  
Austenitic Stainless Steel ◽  
Weld Joint ◽  
Strengthening Effect ◽  
Steel Weld ◽  
Stainless Steel Weld ◽  
Steel Weld Joint ◽  
Austenitic Stainless Steel Weld ◽  
Strain Strengthening

In this paper, Finite Element Modeling (FEM) using Marc software was carried out to investigate the strain-strengthening effect on residual stress in 06Cr19Ni10 austenitic stainless steel weld joint made by MIG welding. The model prediction of residual stress was validated by X-ray Diffraction (XRD) method. It is found that there is a good agreement between the model predictions and the experimental results. The strain-strengthening can significantly improve the distribution of residual welding stress. Specifically in weld zone and the heat-affected zone (HAZ), residual stress decreases with increasing strain-strengthening level.

Sign in / Sign up

Export Citation Format

Share Document