In-Situ Monitoring of Pitting Corrosion in Aluminum Alloy 2024

CORROSION ◽  
1998 ◽  
Vol 54 (6) ◽  
pp. 451-458 ◽  
Author(s):  
C.-M. Liao ◽  
J. M. Olive ◽  
M. Gao ◽  
R. P. Wei
Keyword(s):  
Aluminum Alloy ◽  
Pitting Corrosion ◽  
In Situ Monitoring ◽  
Aluminum Alloy 2024

scholarly journals In-Situ Monitoring and Analysis of the Pitting Corrosion of Carbon Steel by Acoustic Emission

2019 ◽  
Vol 9 (4) ◽  
pp. 706 ◽  
Author(s):  
Junlei Tang ◽  
Junyang Li ◽  
Hu Wang ◽  
Yingying Wang ◽  
Geng Chen
Keyword(s):  
Acoustic Emission ◽  
Carbon Steel ◽  
Pitting Corrosion ◽  
Optical Microscope ◽  
Open Circuit ◽  
In Situ Monitoring ◽  
Localized Corrosion ◽  
Uniform Corrosion ◽  
Corrosion Morphology

The acoustic emission (AE) technique was applied to monitor the pitting corrosion of carbon steel in NaHCO3 + NaCl solutions. The open circuit potential (OCP) measurement and corrosion morphology in-situ capturing using an optical microscope were conducted during AE monitoring. The corrosion micromorphology was characterized with a scanning electron microscope (SEM). The propagation behavior and AE features of natural pitting on carbon steel were investigated. After completion of the signal processing, including pre-treatment, shape preserving interpolation, and denoising, for raw AE waveforms, three types of AE signals were classified in the correlation diagrams of the new waveform parameters. Finally, a 2D pattern recognition method was established to calculate the similarity of different continuous AE graphics, which is quite effective to distinguish the localized corrosion from uniform corrosion.

Inhibition of Filiform Corrosion on Organic-Coated Aluminum Alloy by Hydrotalcite-Like Anion-Exchange Pigments

CORROSION ◽  
2004 ◽  
Vol 60 (3) ◽  
pp. 219-228 ◽  
Author(s):  
H. N. McMurray ◽  
G. Williams
Keyword(s):  
Aluminum Alloy ◽  
Anion Exchange ◽  
Polyvinyl Butyral ◽  
Kelvin Probe ◽  
Free Corrosion Potential ◽  
Filiform Corrosion ◽  
Coating Delamination ◽  
Coating Defect ◽  
Aluminum Alloy 2024

Abstract Novel anion-exchange anticorrosion pigments consisting of nitrate-, carbonate-, and chromate-exchanged hydrotalcite (HT) are shown to inhibit the propagation of filiform corrosion (FFC) effectively on organic-coated aluminum alloy 2024-T3 (AA2024-T3 [UNS A92024]) alloy. The HT-pigments are dispersed in polyvinyl butyral (PVB) coatings applied to the AA2024-T3 surface. Following FFC initiation by application of controlled amounts of aqueous hydrochloric acid (HCl) to a penetrative coating defect, the time-dependent extent of coating delamination is determined both optically and by repeated in-situ scanning using a scanning Kelvin probe (SKP) apparatus. All the HT-pigments profoundly reduce rates of coating delamination by comparison to unpigmented samples. However, inhibitor efficiency is dependent upon the exchangeable anion and increases in the order: carbonate < nitrate < chromate. It is also shown that by using SKP potentiometry, exchangeable chromate anions interact specifically with the metal surface to depress free corrosion potential values.

scholarly journals In-Situ Monitoring and Analyzing Pitting Corrosion of Carbon Steel by Acoustic Emission

2018 ◽  
Author(s):  
Junlei Tang ◽  
Junyang Li ◽  
Hu Wang ◽  
Yingying Wang ◽  
Geng Chen
Keyword(s):  
Acoustic Emission ◽  
Carbon Steel ◽  
Pitting Corrosion ◽  
Optical Microscope ◽  
Open Circuit ◽  
In Situ Monitoring ◽  
Localized Corrosion ◽  
Uniform Corrosion ◽  
Corrosion Morphology

The acoustic emission (AE) technique was applied to monitor the pitting corrosion of carbon steel in NaHCO3 + NaCl solutions. The open circuit potential (OCP) measurement and the corrosion morphology in-situ capturing using optical microscope were conducted during AE monitoring. The corrosion micromorphology was characterized with scanning electron microscope (SEM). The propagation behavior and AE features of natural pitting on carbon steel were investigated. After the performing of signal processing including pre-treatment, shape preserving interpolation and denoising for raw AE waveforms, three types of AE signals can be classified in the correlation diagrams of new waveform parameters. Finally, a 2D pattern recognition method was established to calculate the similarity of different continuous AE graphics, which is quite effective to distinguish the localized corrosion from uniform corrosion.

Sign in / Sign up

Export Citation Format

Share Document