Corrosion Inhibitor Performances for Carbon Dioxide Corrosion of N80 Steel under Static and Flowing Conditions

CORROSION ◽  
2005 ◽  
Vol 61 (4) ◽  
pp. 326-334 ◽  
Author(s):  
X. Jiang ◽  
Y. G. Zheng ◽  
W. Ke
Keyword(s):  
Carbon Dioxide ◽  
Corrosion Inhibitor ◽  
Carbon Dioxide Corrosion ◽  
N80 Steel

Performance Evaluation of the Carbon Dioxide Corrosion Inhibitor IMC-1

2014 ◽  
Vol 490-491 ◽  
pp. 150-154
Author(s):  
Zhen Zhong Fan ◽  
Hui Ming An ◽  
Shu Yi Wang ◽  
Jun Feng Yang
Keyword(s):  
Carbon Dioxide ◽  
Corrosion Rate ◽  
Corrosion Inhibitor ◽  
Caprylic Acid ◽  
Acid Amide ◽  
Steel Corrosion ◽  
Electrode Reaction ◽  
Carbon Dioxide Corrosion ◽  
Electrochemical Polarization ◽  
N80 Steel

The carbon dioxide corrosion inhibitor IMC-1 was composed by caprylic acid amide polyoxyethylene ethers (n=4-5) and a small amount of the TX-10(5%). When the concentration was 200 mg/L, N80 steel corrosion rate was less than 0.125mm/a. With the CO2 partial pressure and temperature increased, N80 steel corrosion rate was decreased. From the electrochemical polarization curve, the adding corrosion inhibitor prevented the electrode reaction. The corrosion inhibitor IMC-1 was anodic inhibitor.

Evaluation of Carbon Dioxide Corrosion on N80 Steel

2014 ◽  
Vol 490-491 ◽  
pp. 311-314
Author(s):  
Zhen Zhong Fan ◽  
An Qi Tong ◽  
Yan Cui ◽  
Jun Feng Yang
Keyword(s):  
Carbon Dioxide ◽  
Liquid Phase ◽  
Corrosion Rate ◽  
Partial Pressure ◽  
Gas Phase ◽  
Test Temperature ◽  
Microscopic Analysis ◽  
Carbon Dioxide Corrosion ◽  
Large White ◽  
N80 Steel

The carbon dioxide corrosion on N80 steel was evaluated under the gas phase and the liquid phase. With the test temperature improved, the corrosion rate increases. Under the condition of gas phase, the corrosion peak is 0.2942mm/a when the temperature is 110°C and pressure is 24 MPa. Under the condition of liquid phase, the corrosion peak is 26.5325mm/a when the temperature is 50°C and pressure is 24 MPa. With the increase of CO2 partial pressure, the corrosion rate of N80 steel was falling. Microscopic analysis shows that the corrosion products of CO2 on N80 steel have a large white flocculent compounds and the corrosion surface have a lot of cracks and holes.

Characterization of the surface film formed from carbon dioxide corrosion on N80 steel

2004 ◽  
Vol 58 (6) ◽  
pp. 1076-1081 ◽  
Author(s):  
S.L. Wu ◽  
Z.D. Cui ◽  
F. He ◽  
Z.Q. Bai ◽  
S.L. Zhu ◽  
...  
Keyword(s):  
Carbon Dioxide ◽  
Surface Film ◽  
Carbon Dioxide Corrosion ◽  
N80 Steel

scholarly journals Mannich Base as Corrosion Inhibitors for N80 Steel in a CO2 Saturated Solution Containing 3 wt % NaCl

Materials ◽  
2019 ◽  
Vol 12 (3) ◽  
pp. 449 ◽  
Author(s):  
Mingjin Tang ◽  
Jianbo Li ◽  
Zhida Li ◽  
Luoping Fu ◽  
Bo Zeng ◽  
...  
Keyword(s):  
Corrosion Inhibitor ◽  
Corrosion Inhibition ◽  
Steel Sheet ◽  
Mannich Base ◽  
Saturated Solution ◽  
Control Group ◽  
Protective Film ◽  
Blank Control Group ◽  
Inhibition Effect ◽  
N80 Steel

In this paper, a corrosion inhibitor containing nitrogen atoms and a conjugated π bond was synthesised, and its final product synthesised by the optimal conditions of the orthogonal test results is named multi-mannich base (MBT). The corrosion inhibition effect on the N80 steel sheet of the corrosion inhibitor was evaluated in a CO2 saturated solution containing 3 wt % NaCl; the corrosion rate was 0.0446 mm/a and the corrosion inhibition rate was 90.4%. Through electrochemical and adsorption theory study, MBT is a mixed corrosion inhibitor that mainly shows cathode suppression capacity. The adsorption of MBT on the surface of the steel sheet follows the Langmuir adsorption isotherm; it can be spontaneously adsorbed on the surface of the N80 steel sheet, which has a good corrosion inhibition effect. The surface of the N80 steel sheet was microscopically characterised by atomic force microscope (AFM). It can be seen from the results that the N80 steel sheet with MBT added is significantly different from the blank control group; the surface of the steel sheet is relatively smooth, indicating that MBT forms an effective protective film on the surface of N80 steel, which inhibits the steel sheet.

Sign in / Sign up

Export Citation Format

Share Document