Employing acclimated activated sludge for biological treatment of leather manufacturing wastewater containing high dimethylamine (DMA) concentrations

2020 ◽  
Vol 207 ◽  
pp. 151-159
Author(s):  
Forough Mehravaran ◽  
Narges Fallah ◽  
Leila Davarpanah
Keyword(s):  
Activated Sludge ◽  
Biological Treatment ◽  
Acclimated Activated Sludge

Pembuatan Pilot Project Pengolahan Air Limbah Industri Rambut Palsu dengan Sistem Lumpur Aktif

2016 ◽  
Vol 8 (15) ◽  
pp. 37-47
Author(s):  
Sri Moertinah ◽  
Misbachul Moenir
Keyword(s):  
Activated Sludge ◽  
Biological Treatment ◽  
Operating Cost ◽  
Pilot Project ◽  
Labor Costs ◽  
Industrial Waste Water ◽  
Microbial Adaptation ◽  
Central Java ◽  
Electricity Costs

This study aims to create a pilot project for wastewater treatment wig industry with biological activated sludge technology to applied in the industry. Design criteria for the pilot project are the influent COD ≤ 900 mg/l, MLSS = 3,000 mg/l, 30-hours residence time. DO ≥ 2 mg/l and flow 10 m3/day. Implementation of a pilot project initiated by seeding aerobic microbes and microbial adaptation to proceed with wastewater to be treated. The trial results showed that the pilot project % COD reduction ranged from 73.2% - 91% and the result is not much different from the results of laboratory-scale research about 89.7% and the quality  of the effluent is already fullfill the standard of industrial waste water wig required by the Central Java Provincial Regulation No. 5 of 2012. The calculation of operating cost of activated sludge biological treatment which includes labor costs, electricity costs, equipment maintenance costs, expenses and other nutrients obtained the price of  Rp. 2972/m3 or Rp. 742.99/wig.ABSTRAKPenelitian ini bertujuan untuk membuat pilot project pengolahan air limbah industri rambut palsu dengan sistem lumpur aktif yang diterapkan di industri. Kriteria desain pilot project tersebut adalah COD influen ≤ 900 mg/l, MLSS = 3.000 mg/l, waktu tinggal 30 jam DO≥2 mg/l  dan debit air limbah 10 m3/hari. Pelaksanaan pilot project dimulai dengan seeding mikroba aerob dan dilanjutkan dengan adaptasi mikroba dengan air limbah yang akan diolah. Hasil uji coba pilot project menunjukkan bahwa % penurunan COD berkisar antara 73,2% - 91% dan hasil ini tidak berbeda jauh dengan hasil penelitian skala laboratorium sekitar 89,7% dan kualitas air limbah hasil pengolahan sudah memenuhi baku mutu air limbah industri rambut palsu yang dipersyaratkan oleh Peraturan Daerah Provinsi Jawa Tengah No 5 tahun 2012. Dari hasil perhitungan biaya operasional pengolahan biologis lumpur aktif yang meliputi biaya tenaga kerja, biaya listrik, biaya perawatan peralatan, biaya nutrien dan lainnya diperoleh harga sebesar Rp. 2972/m3  atau Rp. 742,99/wig.   Kata kunci : air limbah industri rambut palsu, pilot project, sistem lumpur aktif

scholarly journals The diversity of active microbial groups in an activated sludge process treating painting process wastewater

2020 ◽  
Vol 148 ◽  
pp. 01002
Author(s):  
Herto Dwi Ariesyady ◽  
Mentari Rizki Mayanda ◽  
Tsukasa Ito
Keyword(s):  
Wastewater Treatment ◽  
Microbial Community ◽  
16S Rrna ◽  
16S Rrna Gene ◽  
Activated Sludge ◽  
Biological Treatment ◽  
Rrna Gene ◽  
Activated Sludge Process ◽  
Painting Process ◽  
Process Wastewater

Activated sludge process is one of the wastewater treatment method that is applied for many wastewater types including painting process wastewater of automotive industry. This wastewater is well-known to have high heavy metals concentration which could deteriorate water environment if appropriate performance of the wastewater treatment could not be achieved. In this study, we monitored microbial community diversity in a Painting Biological Treatment (PBT) system. We applied a combination of cultivation and genotypic biological methods based on 16S rRNA gene sequence analysis to identify the diversity of active microbial community. The results showed that active microbes that could grow in this activated sludge system were dominated by Gram-negative bacteria. Based on 16S rRNA gene sequencing analysis, it was revealed that their microbial diversity has close association with Bacterium strain E286, Isosphaera pallida, Lycinibacillus fusiformis, Microbacterium sp., Orchobactrum sp., Pseudomonas guariconensis, Pseudomonas sp. strain MR84, Pseudomonas sp. MC 54, Serpens sp., Stenotrophomonas acidaminiphila, and Xylella fastidiosa with similarity of 86 – 99%. This findings reflects that microbial community in a Painting Biological Treatment (PBT) system using activated sludge process could adapt with xenobiotics in the wastewater and has a wide range of diversity indicating a complex metabolism mechanism in the treatment process.

Savings with upgraded performance through improved activated sludge denitrification in the combined activated sludge–biofilter system of the Southpest Wastewater Treatment Plant

2008 ◽  
Vol 57 (8) ◽  
pp. 1287-1293 ◽  
Author(s):  
A. Jobbágy ◽  
G. M. Tardy ◽  
Gy. Palkó ◽  
A. Benáková ◽  
O. Krhutková ◽  
...  
Keyword(s):  
Wastewater Treatment ◽  
Activated Sludge ◽  
Wastewater Treatment Plant ◽  
Biological Treatment ◽  
Treatment Plant ◽  
Oxygen Demand ◽  
Process Efficiency ◽  
Initial Value ◽  
Initial Profile ◽  
Biological Treatment System

The purpose of the experiments was to increase the rate of activated sludge denitrification in the combined biological treatment system of the Southpest Wastewater Treatment Plant in order to gain savings in cost and energy and improve process efficiency. Initial profile measurements revealed excess denitrification capacity of the preclarified wastewater. As a consequence, flow of nitrification filter effluent recirculated to the anoxic activated sludge basins was increased from 23,000 m3 d−1 to 42,288 m3 d−1 at an average preclarified influent flow of 64,843 m3 d−1, Both simulation studies and microbiological investigations suggested that activated sludge nitrification, achieved despite the low SRT (2–3 days), was initiated by the backseeding from the nitrification filters and facilitated by the decreased oxygen demand of the influent organics used for denitrification. With the improved activated sludge denitrification, methanol demand could be decreased to about half of the initial value. With the increased efficiency of the activated sludge pre-denitrification, plant effluent COD levels decreased from 40–70 mg l−1 to < 30–45 mg l−1 due to the decreased likelihood of methanol overdosing in the denitrification filter

scholarly journals Microalgae as biological treatment for municipal wastewater – effects on the sludge handling in a treatment plant

2018 ◽  
Vol 78 (3) ◽  
pp. 644-654 ◽  
Author(s):  
J. Olsson ◽  
S. Schwede ◽  
E. Nehrenheim ◽  
E. Thorin
Keyword(s):  
Heavy Metals ◽  
Activated Sludge ◽  
Biological Treatment ◽  
Municipal Wastewater ◽  
Treatment Plant ◽  
Waste Activated Sludge ◽  
Activated Sludge Process ◽  
Primary Sludge ◽  
Thermophilic Conditions ◽  
Mesophilic Conditions

Abstract A mix of microalgae and bacteria was cultivated on pre-sedimented municipal wastewater in a continuous operated microalgae-activated sludge process. The excess material from the process was co-digested with primary sludge in mesophilic and thermophilic conditions in semi-continuous mode (5 L digesters). Two reference digesters (5 L digesters) fed with waste-activated sludge (WAS) and primary sludge were operated in parallel. The methane yield was slightly reduced (≈10%) when the microalgal-bacterial substrate was used in place of the WAS in thermophilic conditions, but remained approximately similar in mesophilic conditions. The uptake of heavy metals was higher with the microalgal-bacterial substrate in comparison to the WAS, which resulted in higher levels of heavy metals in the digestates. The addition of microalgal-bacterial substrate enhanced the dewaterability in thermophilic conditions. Finally, excess heat can be recovered in both mesophilic and thermophilic conditions.

BIOLOGICAL TREATABILITY OF AMINE LADEN REFINERY WASTEWATER

1994 ◽  
Vol 30 (3) ◽  
pp. 21-28 ◽  
Author(s):  
Nyuk-Min Chong
Keyword(s):  
Activated Sludge ◽  
Biological Treatment ◽  
Flow Reactor ◽  
Treatment Plant ◽  
Petroleum Products ◽  
System Stability ◽  
Refinery Wastewater ◽  
Continuous Flow Reactor ◽  
Biological Treatability

Mono- and Di- hydroxyl amines are used in the desulfuration processes for refined petroleum products. The refinery wastewater treatment plant may be shocked by amine laden wastewater periodically, bringing operation difficulties to the biological treatment units. Data on the treatability, shock load behaviour and on long term system stability of biological treatment of amines are therefore required. Shake-flask test results showed that pure diethanol amine and diisopropanol amines have characteristics of persistent compounds. Each of the two compounds has a prolonged lag time when first inoculated with indigenous activated sludge. Acclimated activated sludge in a continuous flow reactor treated a feed of ethanol amine with a 93 percent COD removal and a 98 percent nitrification, but the system was unstable because amine caused a bulking sludge. By physical retention of the activated sludge, 550 mg/l influent COD of amines was treated to m1 average 50 mg/l effluent COD. Sludge yield was approximately 0.26 mg MLSS per mg COD. The activated sludge system withstood a chm1ge of feed to a real refinery wastewater laden with the; amine. A mean cell residence time above five (5) days should be maintained for safe treatment of; amine.

scholarly journals Biological Treatment of Mustard Tuber Wastewater and Urban Sewage by Cyclic Activated Sludge System

2014 ◽  
Vol 26 (11) ◽  
pp. 3261-3264 ◽  
Author(s):  
Hongxiang Chai ◽  
Zhiwen Wei ◽  
Wei Kang ◽  
Yinghua Wei ◽  
Jun Du ◽  
...  
Keyword(s):  
Activated Sludge ◽  
Biological Treatment ◽  
Urban Sewage ◽  
Activated Sludge System

scholarly journals Cost Effective Method for Toxicity Screening of Pharmaceutical Wastewater Containing Inorganic Salts and Harmful Organic Compounds

2019 ◽  
Vol 23 (1) ◽  
pp. 52-63 ◽  
Author(s):  
Elina Strade ◽  
Daina Kalnina
Keyword(s):  
Activated Sludge ◽  
Biological Treatment ◽  
Oxygen Demand ◽  
Cost Effective ◽  
Practical Implementation ◽  
Toxicity Screening ◽  
Pharmaceutical Wastewater ◽  
Cost Effective Method ◽  
Wide Range ◽  
Wastewater Biological Treatment

Abstract Pharmaceutical wastewater biological treatment plants are stressed with multi-component wastewater and unexpected variations in wastewater flow, composition and toxicity. To avoid operational problems and reduced wastewater treatment efficiency, accurate monitoring of influent toxicity on activated sludge microorganisms is essential. This paper outlines how to predict highly toxic streams, which should be avoided, using measurements of biochemical oxygen demand (BOD), if they are made in a wide range of initial concentration. The results indicated that wastewater containing multivalent Al3+ cations showed a strong toxic effect on activated sludge biocenosis irrespectively of dilutions, while toxicity of phenol and formaldehyde containing wastewater decreased considerably with increasing dilution. Activated sludge microorganisms were not sensitive to wastewater containing halogenated sodium salts (NaCl, NaF) and showed high treatment capacity of saline wastewater. Our findings confirm that combined indicators of contamination, such as chemical oxygen demand (COD), alone do not allow evaluating potential toxic influence of wastewater. Obtained results allow identifying key inhibitory substances in pharmaceutical wastewater and evaluating potential impact of new wastewater streams or increased loading on biological treatment system. Proposed method is sensitive and cost effective and has potential for practical implementation in multiproduct pharmaceutical wastewater biological treatment plants.

Sign in / Sign up

Export Citation Format

Share Document