Eggshell modified with alum as low-cost sorbent to removal of fluoride from aquatic environments: isotherm and kinetic studies

2019 ◽  
Vol 146 ◽  
pp. 326-332 ◽  
Author(s):  
Sara Sadat Hosseini ◽  
Hasan Pasalari ◽  
Nader Yousefi ◽  
Amir Hossein Mahvi
Keyword(s):  
Low Cost ◽  
Kinetic Studies ◽  
Aquatic Environments

Removal of Methylene Blue Dye by Using Eggshell Powder

2013 ◽  
Vol 65 (1) ◽  
Author(s):  
Norzita Ngadi ◽  
Chin Chiek Ee ◽  
Nor Aida Yusoff
Keyword(s):  
Methylene Blue ◽  
Textile Industry ◽  
Low Cost ◽  
Kinetic Studies ◽  
Operating Conditions ◽  
Blue Dye ◽  
Dye Wastewater ◽  
Order Model ◽  
Aquatic Life ◽  
Pseudo Second Order

Dyes contain carcinogenic materials which can cause serious hazards to aquatic life and the users of water. Textile industry is the main source of dye wastewater which results in environmental pollution. Many studies have been conducted to investigate the use of low cost adsorbent as an alternative technique for the adsorption of dye. The objective of this study is to determine the potential of eggshell powder as an adsorbent for methylene blue removal and find out the best operating conditions for the color adsorption at laboratory scale. The adsorption of cationic methylene blue from aqueous solution onto the eggshell powder was carried out by varying the operating parameters which were contact time, pH, dosage of eggshell powder and temperature in order to study their effect in adsorption capacity of eggshell powder. The results obtained showed that the best operating condition for removal of methylene blue was at pH 10 (78.98 %) and temperature 50°C (47.37 %) by using 2 g of eggshell powder (57.03 %) with 30 minutes equilibrium time (41.36 %). The kinetic studies indicated that pseudo-second-order model best described the adsorption process.

scholarly journals Organic Dyes Adsorption on the Almond Shell (Prunus dulcis) as Agricultural Solid Waste from Aqueous Solution in Single and Binary Mixture Systems

2021 ◽  
Vol 12 (2) ◽  
pp. 2022-2040
Keyword(s):  
Aqueous Solution ◽  
Binary Mixture ◽  
Contact Time ◽  
Binary Systems ◽  
Organic Dyes ◽  
Low Cost ◽  
Kinetic Studies ◽  
Prunus Dulcis ◽  
Order Kinetic ◽  
Almond Shell

Almond shell (AS) is a low-cost adsorbent used in this study for the removal of methylene blue (MB), crystal violet (CV), and Congo red (CR) from an aqueous solution in single and mixture binary systems. The low-cost adsorbent was characterized by FTIR and SEM analysis. The effects of AS dose, contact time, initial dye concentration, pH, and temperature on MB, CV, and CR adsorption were studied in a single system. In a binary system, the MB, CV, and CR were removed from the mixture of MB+CR, CV+MB, and CV+CR with a percentage in volume ranging from 0 to 100 % in MB and CV, and CR. Kinetic studies showed rapid sorption following a second-order kinetic model with of contact time of 10 min. The modulation of adsorption isotherms showed that retention follows the Langmuir model. The thermodynamic parameters proved that the MB, CV, and CR adsorption process was feasible, spontaneous, and exothermic. The synergy adsorption between dyes in a binary mixture of MB+CR and CV+CR, while the competition adsorption between dyes in a binary mixture of MB+ CV.

scholarly journals An alternative low-cost adsorbent for gold recovery from cyanide-leached liquors: Adsorption isotherm and kinetic studies

2018 ◽  
Vol 37 (1-2) ◽  
pp. 3-23 ◽  
Author(s):  
Refiloe Tsolele ◽  
Fanyana Moses Mtunzi ◽  
Michael John Klink ◽  
Vusumzi Emmanuel Pakade
Keyword(s):  
Activated Carbons ◽  
Selective Adsorption ◽  
Low Cost ◽  
Kinetic Studies ◽  
Agitation Speed ◽  
Gold Recovery ◽  
Attractive Alternative ◽  
Solution Ph ◽  
Initial Concentration ◽  
Modified Activated Carbons

Pristine Macadamia nutshell-based activated carbons were chemically oxidized with different concentrations of H3PO4 and HNO3 to increase their surface adsorption properties and further explore if they could be an attractive alternative low-cost adsorbent for gold recovery from cyanide-leached liquors. The modified activated carbons were labeled MACN20, MACN40 and MACN55 to signify the materials prepared from 20%, 40% and 55% (v/v) HNO3, respectively. Similar nomenclature was followed for H3PO4-modified activated carbons. Brunauer-Emmet-Teller, scanning electron microscopy, thermogravimetric analysis, Fourier transform infrared spectroscopy, elemental analysis and X-ray diffraction spectroscopy were used to characterize the prepared activated carbons. The physical properties were attained through determining attrition, ash content, volatile matter and moisture content of all the activated carbons. Various parameters that affect selective adsorption such as the effect of initial concentration, time, agitation speed, interfering species and the dose of the adsorbent were investigated. Optimal parameters for gold ion adsorption were as follows: solution pH, 10; contact time, 6 h; agitation speed, 150 r/min; sorbent amount, 4 g and initial concentration, 5.5 mg/L. The observed selectivity order was not the same for all the adsorbents, but the adsorption of gold was found to be mostly influenced in the presence of nickel and least influenced by copper. MACN55 was found to be the most efficient adsorbent with 74% of gold adsorption from a real-world sample and displayed a similar performance to coconut-based activated carbons.

scholarly journals Brilliant Green and Acid Orange 74 Dyes Removal from Water by Pinus roxburghii Leaves in Naturally Benign Way: An Application of Green Chemistry

2019 ◽  
Vol 2019 ◽  
pp. 1-10 ◽  
Author(s):  
Rabia Rehman ◽  
Sara Jan Muhammad ◽  
Muhammad Arshad
Keyword(s):  
Brilliant Green ◽  
Low Cost ◽  
Kinetic Studies ◽  
Agitation Speed ◽  
Pinus Roxburghii ◽  
Acid Orange ◽  
Pseudo Second Order ◽  
Optimized Conditions ◽  
Adsorbent Dose ◽  
Dyes Removal

The purpose of this study was to use low cost and easily accessible biosorbent for batch-scale elimination of brilliant green and acid orange 74 dyes from aqueous solution. Pinus roxburghii leaves were utilized to study their dye-eliminating capacities. The adsorbent was characterized by FTIR, TGA, DTA, and SEM. The optimized conditions for brilliant green and acid orange 74 dye elimination were adsorbent dose, 1.2 and 1.8 g; contact time, 30 and 45 min; pH, 2 and 1; temperature, 50°C and 60°C; and agitation speed, 125 rpm and 50 rpm for BG and AO-74, respectively. Adsorption records well fitted Langmuir isotherm. Possibility of the procedure was shown by negative values of the thermodynamic parameter ∆G° for both dyes. Kinetic studies showed that adsorption of BG and AO-74 dyes from watery solution by PR leaves followed pseudo-second-order kinetics.

scholarly journals Autonomous Sensor Node Powered by CM-Scale Benthic Microbial Fuel Cell and Low-Cost and Off-the-Shelf Components

2016 ◽  
Vol 3 (3) ◽  
Author(s):  
T. Chailloux ◽  
A. Capitaine ◽  
B. Erable ◽  
G. Pillonnet
Keyword(s):  
Fuel Cells ◽  
Fuel Cell ◽  
Microbial Fuel Cell ◽  
Power Management ◽  
Microbial Fuel Cells ◽  
Sensor Node ◽  
Low Cost ◽  
Aquatic Environments ◽  
Energy Harvesters ◽  
Autonomous Sensor

AbstractMicrobial fuel cells (MFC’s) are promising energy harvesters to constantly supply energy to sensors deployed in aquatic environments where solar, thermal and vibration sources are inadequate. In order to show the ready-to-use MFC potential as energy scavengers, this paper presents the association of a durable benthic MFC with a few dollars of commercially-available power management units (PMU’s) dedicated to other kinds of harvesters. With 20 cm

Sign in / Sign up

Export Citation Format

Share Document