Evaluation on cleaning efficiency and membrane fouling by permeation coefficient and concentration polarization factor in pilot-scale SWRO processes

2018 ◽  
Vol 120 ◽  
pp. 23-30
Author(s):  
Jong-Woo Nam ◽  
Geon-Youb Kim ◽  
Minjin Kim ◽  
Poo Reum Kim ◽  
Hyung-Soo Kim ◽  
...  
Keyword(s):  
Membrane Fouling ◽  
Concentration Polarization ◽  
Pilot Scale ◽  
Cleaning Efficiency ◽  
Polarization Factor

scholarly journals Impact of Chlorinated-Assisted Backwash and Air Backwash on Ultrafiltration Fouling Management for Urban Wastewater Tertiary Treatment

Membranes ◽  
2021 ◽  
Vol 11 (10) ◽  
pp. 733
Author(s):  
Jiaqi Yang ◽  
Mathias Monnot ◽  
Lionel Ercolei ◽  
Philippe Moulin
Keyword(s):  
Physicochemical Properties ◽  
Membrane Fouling ◽  
Membrane Surface ◽  
Pilot Scale ◽  
Urban Wastewater ◽  
Cleaning Efficiency ◽  
Filtration Performance ◽  
Potential Damage ◽  
Wastewater Tertiary Treatment

To improve membrane fouling management, the NaClO-assisted backwash has been developed to improve permeability maintenance and reduce the need for intensive chemical cleanings. This study is aimed to focus on the efficiency of NaClO-assisted backwash in real UF pilot scale and with periodic classic backwash (CB) and air backwash (AB). The impacts on hydraulic filtration performance, physicochemical properties of membrane material under different addition frequencies of NaClO, and the performance of chlorinated CB and AB will be discussed. In result, 10 mg Cl2 L−1 NaClO addition in backwash water is confirmed to greatly improve the overall filtration performance and backwash cleaning efficiency. One condition stands out from the other due to better control of irreversible fouling, less NaClO consumption in 10 years prediction, sustainable and adaptable filtration performance, and less potential damage on the physicochemical properties of the membrane. Additionally, it can be inferred from this experiment that frequent contact with NaClO induced some degradation on the PES-made UF membrane surface properties. To retain the best state of UF membrane on anti-fouling and qualified production, the optimized condition with more frequent NaClO contact was not suggested for long-term filtration.

Nanofiltration of colored surface water: Quebec's experience

2003 ◽  
Vol 3 (5-6) ◽  
pp. 15-22
Author(s):  
P. Kouadio ◽  
M. Tétrault
Keyword(s):  
Drinking Water ◽  
Surface Water ◽  
Membrane Fouling ◽  
Pilot Scale ◽  
Operating Conditions ◽  
Quebec City ◽  
Water Regulation ◽  
Eastern Canada

Three colored surface water nanofiltration pilot-scale projects were conducted in the province of Quebec (eastern Canada), between November 2000 and March 2002, by the company H2O Innovation (2000) inc., for the municipalities of Lac Bouchette, Latulipe-et-Gaboury and Charlesbourg (now part of Quebec City). Results indicated that nanofiltration permeate quality has an advance on present drinking water regulation standard in Quebec, but important membrane fouling occurred. Fouling can be controlled by pretreatment and optimization of the operating conditions.

Treatment of highly-colored surface water by a hybrid microfiltration membrane system incorporating ion-exchange

2018 ◽  
Vol 19 (3) ◽  
pp. 855-863 ◽  
Author(s):  
T. Miyoshi ◽  
Y. Takahashi ◽  
T. Suzuki ◽  
R. Nitisoravut ◽  
C. Polprasert
Keyword(s):  
Surface Water ◽  
Hybrid System ◽  
Membrane Fouling ◽  
Membrane Filtration ◽  
Membrane System ◽  
Pilot Scale ◽  
Manganese Concentration ◽  
Moderate Increase ◽  
Coagulant Dosage ◽  
Filtration System

Abstract This study investigated the performance of a hybrid membrane filtration system to produce industrial water from highly-colored surface water. The system consists of a membrane filtration process with appropriate pretreatments, including coagulation, pre-chlorination, and anion exchange (IE) process. The results of the pilot-scale experiments revealed that the hybrid system can produce treated water with color of around 5 Pt-Co, dissolved manganese concentration of no more than 0.05 mg/L, and a silt density index (SDI) of no more than 5 when sufficient coagulant and sodium hypochlorite were dosed. Although the IE process effectively reduced the color of the water, a moderate increase in the color of the IE effluent was observed when there was a significant increase in the color of the raw water. This resulted in a severe membrane fouling, which was likely to be attributed to the excess production of inorganic sludge associated with the increased coagulant dosage required to achieve sufficient reduction of color. Such severe membrane fouling can be controlled by optimising the backwashing and relaxation frequencies during the membrane filtration. These results indicate that the hybrid system proposed is a suitable technology for treating highly-colored surface water.

scholarly journals Removal Characteristics of N-Nitrosamines and Their Precursors by Pilot-Scale Integrated Membrane Systems for Water Reuse

2018 ◽  
Vol 15 (9) ◽  
pp. 1960 ◽  
Author(s):  
Haruka Takeuchi ◽  
Naoyuki Yamashita ◽  
Norihide Nakada ◽  
Hiroaki Tanaka
Keyword(s):  
Membrane Fouling ◽  
Water Reuse ◽  
Pilot Scale ◽  
Feed Water ◽  
Water Reclamation ◽  
Size Distributions ◽  
Membrane Systems ◽  
Chemical Cleaning ◽  
Ro Membrane ◽  
Feed Water Temperature

This study investigated the removal characteristics of N-Nitrosamines and their precursors at three pilot-scale water reclamation plants. These plants applies different integrated membrane systems: (1) microfiltration (MF)/nanofiltration (NF)/reverse osmosis (RO) membrane; (2) sand filtration/three-stage RO; and (3) ultrafiltration (UF)/NF and UF/RO. Variable removal of N-Nitrosodimethylamine (NDMA) by the RO processes could be attributed to membrane fouling and the feed water temperature. The effect of membrane fouling on N-Nitrosamine removal was extensively evaluated at one of the plants by conducting one month of operation and chemical cleaning of the RO element. Membrane fouling enhanced N-Nitrosamine removal by the pilot-scale RO process. This finding contributes to better understanding of the variable removal of NDMA by RO processes. This study also investigated the removal characteristics of N-Nitrosamine precursors. The NF and RO processes greatly reduced NDMA formation potential (FP), but the UF process had little effect. The contributions of MF, NF, and RO processes for reducing FPs of NDMA, N-Nitrosopyrrolidine and N-Nitrosodiethylamine were different, suggesting different size distributions of their precursors.

Removal of Natural Organic Matter by Ultrafiltration: Characterisation, Fouling and Cleaning

1999 ◽  
Vol 40 (9) ◽  
pp. 113-120 ◽  
Author(s):  
A. Maartens ◽  
P. Swart ◽  
E. P. Jacobs
Keyword(s):  
Organic Matter ◽  
Natural Organic Matter ◽  
Membrane Fouling ◽  
Pure Water ◽  
Water Flux ◽  
Cleaning Efficiency ◽  
Commercial Sample ◽  
Membrane Selectivity ◽  
Flux Measurements ◽  
Pure Water Flux

Organic matter in natural brown water as well as humic acids from a commercial sample were characterised by ultraviolet-visible light-spectroscopy and used in ultrafiltration studies. During ultrafiltration the pure-water flux and the operational flux were measured continuously to determine the degree of membrane fouling. The natural organic matter and commercial humic acid concentrations of the feed and permeate solutions were determined spectrophotometrically. These variables were used in conjunction with conventional flux measurements, to determine the colour-removal efficiency of ultrafiltration as well as the degree of foulant adsorption onto the membranes. Fouled membranes were cleaned with alkaline chemical agents normally used to extract natural organic matter from soil samples. The cleaning efficiency and the effect of cleaning solutions on the membrane selectivity were studied.

Performance and membrane fouling in a pilot scale SBR process coupled with membrane

2003 ◽  
Vol 47 (1) ◽  
pp. 139-144 ◽  
Author(s):  
H. Shin ◽  
S. Kang
Keyword(s):  
Membrane Fouling ◽  
Batch Reactor ◽  
Pilot Scale ◽  
Nitrifying Bacteria ◽  
Endogenous Respiration ◽  
Aeration Time ◽  
Membrane Flux ◽  
Start Up ◽  
Cell Test ◽  
Stirred Cell

The performance of the pilot-scale submerged membrane coupled with sequencing batch reactor (SM-SBR) for upgrading effluent quality was investigated in this study. The reactor was operated with 3-hour cycle with alternating anoxic and aerobic conditions to treat organics, nitrogen and phosphate. Despite various influent characteristics, COD removal was always higher than 95%. Sufficient nitrification was obtained within a few weeks after start-up and during the stable period, complete nitrification occurred despite short aeration time. Total nitrogen (TN) removal efficiency was reached up to 85%. Membrane flux was critical for TN removal so that the decrease of flux by membrane fouling led to increase of HRT, and it caused the endogenous respiration of microorganisms such as nitrifying bacteria. The stirred cell test revealed the significant role of the soluble fraction in membrane permeability and dissolved solids played a major role in the short-term fouling mechanism. The cake resistance by the soluble COD fraction of supernatant or soluble microbial products (SMP) was investigated as a major part of total resistance.

Sign in / Sign up

Export Citation Format

Share Document