scholarly journals Output-Only System Identification and Model Updating for Performance Evaluation of Tall Buildings

2008 ◽  
Vol 12 (4) ◽  
pp. 19-33 ◽  
Keyword(s):  
Performance Evaluation ◽  
System Identification ◽  
Model Updating ◽  
Tall Buildings ◽  
Output Only

Structural Damage Assessment Using Output-Only Measurement: Localization and Quantification

2013 ◽  
Author(s):  
Chin-Hsiung Loh ◽  
Min-Hsuan Tseng ◽  
Shu-Hsien Chao
Keyword(s):  
Damage Detection ◽  
Damage Assessment ◽  
Structural Damage ◽  
Damage Identification ◽  
Model Updating ◽  
Null Space ◽  
Singular Spectrum Analysis ◽  
Damage Index ◽  
Computation Efficiency ◽  
Output Only

One of the important issues to conduct the damage detection of a structure using vibration-based damage detection (VBDD) is not only to detect the damage but also to locate and quantify the damage. In this paper a systematic way of damage assessment, including identification of damage location and damage quantification, is proposed by using output-only measurement. Four level of damage identification algorithms are proposed. First, to identify the damage occurrence, null-space and subspace damage index are used. The eigenvalue difference ratio is also discussed for detecting the damage. Second, to locate the damage, the change of mode shape slope ratio and the prediction error from response using singular spectrum analysis are used. Finally, to quantify the damage the RSSI-COV algorithm is used to identify the change of dynamic characteristics together with the model updating technique, the loss of stiffness can be identified. Experimental data collected from the bridge foundation scouring in hydraulic lab was used to demonstrate the applicability of the proposed methods. The computation efficiency of each method is also discussed so as to accommodate the online damage detection.

A Multi-State Strategy for Structural Damage Detection Using Sensitivity of Weighted Transmissibility Function

2021 ◽  
pp. 2150144
Author(s):  
Ziwei Luo ◽  
Huanlin Liu ◽  
Ling Yu
Keyword(s):  
Damage Detection ◽  
Structural Damage ◽  
Model Updating ◽  
Structural Parameters ◽  
Experimental Studies ◽  
Fe Model ◽  
Limited Information ◽  
Structural Damage Detection ◽  
State Strategy ◽  
Output Only

In practice, a model-based structural damage detection (SDD) method is helpful for locating and quantifying damages with the aid of reasonable finite element (FE) model. However, only limited information in single or two structural states is often used for model updating in existing studies, which is not reasonable enough to represent real structures. Meanwhile, as an output-only damage indicator, transmissibility function (TF) is proven to be effective for SDD, but it is not sensitive enough to change in structural parameters. Therefore, a multi-state strategy based on weighted TF (WTF) is proposed to improve sensitivity of TF to change in parameters and in order to further obtain a more reasonable FE model for SDD in this study. First, WTF is defined by TF weighted with element stiffness matrix, and relationships between WTFs and change in structural parameters are established based on sensitivity analysis. Then, a multi-state strategy is proposed to obtain multiple structural states, which is used to reasonably update the FE model and detect structural damages. Meanwhile, due to fabrication errors, a two-stage scheme is adopted to reduce the global and local discrepancy between the real structure and the FE model. Further, the [Formula: see text]-norm and the [Formula: see text]-norm regularization techniques are, respectively, introduced for both model updating and SDD problems by considering the characteristics of problems. Finally, the effectiveness of the proposed method is verified by a simply supported beam in numerical simulations and a six-storey frame in laboratory. From the simulation results, it can be seen that the sensitivity to structural damages can be improved by the definition of WTF. For the experimental studies, compared with the FE model updated from the single structural state, the FE model obtained by the multi-state strategy has an ability to more reasonably describe the change of states in the frame. Moreover, for the given structural damages, the proposed method can detect damage locations and degrees accurately, which shows the validity of the proposed method and the reliability of the updated FE model.

Nonlinear subspace system identification based on output-only measurements

2020 ◽  
Vol 357 (17) ◽  
pp. 12904-12937 ◽  
Author(s):  
Amirali Sadeqi ◽  
Shapour Moradi ◽  
Kourosh Heidari Shirazi
Keyword(s):  
System Identification ◽  
Output Only ◽  
Subspace System Identification
Sign in / Sign up

Export Citation Format

Share Document