scholarly journals Efficiency of a Solar Hydronic Space Heating System under the Algerian Climate

2016 ◽  
Vol 6 (6) ◽  
pp. 1274-1279
Author(s):  
I. Zeghib ◽  
A. Chaker

Hydronic heating systems supplied by renewable energy sources are one of the main solutions for substituting fossil fuel and natural gas consumption. This paper presents the development of modeling and analysis of a solar hydronic heating system in an existing single-family house built in 1990’s heated by low-temperature radiators. The simulation has been used to study the potential of using this system under climatic conditions in Algeria. And for this purpose, a component based on the simulation model for the thermal behavior of each component of the system are carried out in order to evaluate the economic performance for this system. The system is compared, with a conventional high-temperature boiler system. The results indicated that single-family houses could be heated with solar hydronic heating and provided an acceptable level of thermal comfort in the room with 22°C, according to the results of the analysis, the solar energy covers only 20.8% of the total energy consumption in a single-family house. Furthermore, the thermal performance of the heating conventional system can be largely improved up to 15%.

Buildings ◽  
2019 ◽  
Vol 10 (1) ◽  
pp. 5
Author(s):  
Amir Vadiee ◽  
Ambrose Dodoo ◽  
Elaheh Jalilzadehazhari

Floor heating and radiators are two of the most common types of hydronic heating systems used for space heating in single-family houses in cold climate regions. Notwithstanding, there are few comparative studies on indoor temperature distribution and system cost evaluations for radiators and floor heating. Furthermore, there are no aligned outcomes in terms of total heat supply for a single-family house with radiators or floor heating. In this study, the effect of building energy efficiency level and construction type, including flooring material, on the supply heating demand and transmission heat losses were studied for both radiator and floor heating systems. For this purpose, a single-family house located in Växjö, Sweden, was modeled as a case study. The heating demand was supplied with a district heating system with a similar supply temperature at 45 °C for both the radiator and floor heating system. A sensitivity analysis was also performed to assess the effect of flooring configurations on the annual supply heating demand for both conventional and passive versions of the case-study building. The results showed that the radiator-integrated building had a lower supply heating demand in comparison with the floor heating-integrated buildings. Based on the sensitivity studies, the flooring material did not have a significant influence on the supply heating demand and on the transmission heat losses in the case of the radiators. The supply heating demand was only reduced up to 3% if the flooring U-value was improved by 60%. The results also showed that refurbishment in a standard conventional building with a radiator heating system based on the passive criteria led to a 58% annual energy savings, while this amount for a building with a floor heating system was approximately 49%.


2016 ◽  
Vol 20 (suppl. 1) ◽  
pp. 309-320 ◽  
Author(s):  
Valentina Turanjanin ◽  
Biljana Vucicevic ◽  
Marina Jovanovic

The existing building stock energy consumption accounts for about 38% of final energy consumption in Republic of Serbia. 70% of that energy is consumed by residential sector, mostly for space heating. This research is addressed to the single family house building placed in the Belgrade city. The house has ground and first floor with total heating area of 130 m2 and pellet as space heating source. The aim of this paper is to evaluate energy and economic analysis for different heating systems. Several homeheating were compared: Option 1 (biomass combustion boiler using pellet as a fuel), Option 2 (gas combustion boiler) and Option 3 (heat pump). The building performance was evaluated by TRNSYS 17 simulation code. Results show estimated savings using renewable energy sources.


Author(s):  
Teodora Melania Şoimoşan ◽  
Raluca Andreea Felseghi ◽  
Maria Simona Răboacă ◽  
Constantin Filote

Within the current context of energy, there are several ways to meet the challenges of durable development. Efficiency in energy use, considered to be the fifth energy source, as well as the use of sustainable energy sources represent critical objectives. Nowadays, almost 50% of the total energy consumption in Europe is consumed by building heating and cooling. The current heat demand is mainly covered by conventional energy—fossil fuels. Consequently, there is a significant growth potential for the use of renewable energy sources (RES) in order to produce heat. One can expect in the near future that the energy systems would include a larger percentage of renewable sources, so the increase of the RES share is one of the main objectives of the thermoenergetic field. This chapter approaches heating system typology, the performance indicators used to asses the hybrid heating systems, and at the same time synthetising the assumptions of ensuring the optimum operating conditions.


2018 ◽  
Vol 44 ◽  
pp. 00054
Author(s):  
Agnieszka Jachura

This paper discusses the use of modern and effective heating systems, using fossil fuels and renewable energy sources on the example of a comparative analysis of a gas boiler and heat pump for a single-family building. The aim of the work was to conduct a comparative analysis of heating systems in terms of energy, economy and ecology. The concepts of heating systems based on a gas boiler and a heat pump are proposed. An economic analysis based on the LCC and ecological method was carried out, related to the equivalent emission, in order to compare the degree of environmental nuisance of the proposed heat sources. For the building in question, a more advantageous solution was the use of a system based on a condensing gas boiler. The economic analysis shows that in the assumed life cycle (20 years), the total cost for a heating system based on a gas boiler is lower than in the case of a heat pump by 11%. Also, the initial costs in this variant are lower by nearly half compared to the heat pump system. Environmental analyzes have shown lower annual emissions of pollutants and a 6-fold lower equivalent emission for a gas-fired heating system.


Proceedings ◽  
2020 ◽  
Vol 51 (1) ◽  
pp. 11
Author(s):  
Agata Witkowska ◽  
Dorota Anna Krawczyk

In recent years, modern and energy-saving solutions, such as heat pumps or solar collectors, have enjoyed great popularity in the heating and cooling sector, which is conditioned by political and environmental factors. The aim of this paper was to analyze the advisability of the employment of renewable energy sources, such as a heat pump, for heating and cooling in single-family buildings in Poland and Spain. Based on the calculations made for a traditional house, located in two cities with different climatic conditions—Wroclaw and Cordoba, the heat losses and gains were determined. On that basis, the heating and cooling demand for these locations were calculated and next—taking into account the obtained results—reversible air–water heat pumps were selected. In addition, the investment expenditures for purchase and assembly of the heat pumps were estimated, as well as the operating costs of the installation. After a deep analysis, it was found that the total cost of using an air-source heat pump, is almost 44% lower for Cordoba, than for Wroclaw.


Energies ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4625
Author(s):  
Alisa Freyre ◽  
Stefano Cozza ◽  
Matthias Rüetschi ◽  
Meinrad Bürer ◽  
Marlyne Sahakian ◽  
...  

In this paper, we perform a literature review on the current state of knowledge about homeowners in the context of the adoption of renewable heating systems. Despite a considerable number of studies about homeowners, homeowner–installer interactions, and ways to improve the effectiveness of renewable heating programs, based on homeowner knowledge, have not yet been studied in much detail. To address these knowledge gaps, we conduct a qualitative study on single-family house owners who installed heat pumps and took part in a renewable heating program in Geneva, Switzerland. We cover homeowner practices in choosing installers and heating system types, homeowners’ feedback about heat pump installation and use, as well as their experience in participation in the renewable heating program. Based on the literature review and the findings from the interviews, we provide the following recommendations on how to increase the effectiveness of renewable heating programs: (a) support for homeowners should not be limited to financial incentives; (b) partnership programs with installers could help to increase the quality of installation services and enable homeowners to choose qualified installers; and (c) assisting homeowners in pre-qualification and ex-post analysis, in learning how to operate their renewable heating systems and in solving problems during the post-installation period, can contribute to improved technology reputation, which can, in turn, increase technology uptake by other homeowners.


2013 ◽  
Vol 7 (4) ◽  
pp. 28-33
Author(s):  
Monika Pawlita

Background: The methods of heating houses with system components determine the energy-saving systems. Energy-saving solutions allow to maintain comfortable conditions in the house, while minimizing the cost associated with its operation and at the same time helping to protect natural environment. The examples of such solutions include condensing boilers, heat pumps and solar collectors.Material and methods: The object of the analysis in this paper is typical single-family house occupying the area of 150 m². The comparison of analyzed heating system for a single-family house, including modern energy sources, allows the assessment of the most cost-effective method of heating. Results: Choosing rational method of heating for a single-family house is dictated mainly by economic reasons. The efficiency of the heating sources is also very important. In addition, an important factor is a heating period, which depends on the weather conditions in a given year.Conclusions: The costs of fuel/energy are still growing. Fuel selection is determined mainly by fuel calorific value and the price. To select the type of the heating source one must take into account the cost of kWh of heat.


2018 ◽  
Vol 215 ◽  
pp. 384-395 ◽  
Author(s):  
Magdalena Nemś ◽  
Jacek Kasperski ◽  
Artur Nemś ◽  
Anna Bać

Sign in / Sign up

Export Citation Format

Share Document