scholarly journals Miniaturization of Circularly Polarized Patch Antenna for RFID Reader Applications

2020 ◽  
Vol 10 (3) ◽  
pp. 5655-5659
Author(s):  
K. Mekki ◽  
O. Necibi ◽  
C. Boussetta ◽  
A. Gharsallah
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Axial Ratio ◽  
Uhf Rfid ◽  
Radiation Mode ◽  
Circularly Polarized ◽  
Rfid Systems ◽  
Microstrip Patch ◽  
Low Profile ◽  
Reduced Surface

This paper presents a Circularly Polarized Microstrip Patch Antenna (CPMPA) miniaturization with parasitic elements, suitable for UHF RFID systems. The antenna consists of a half E-shaped patch with cuts. A truncated corner patch can generate an additional Circular Polarization (CP) radiation mode and further enhance the axial ratio. Two symmetric cross shaped slots along the horizontal axis of the CPMPA have been embedded, and its dimension optimization has been based on parametric analysis. Thanks to this slotted structure and reduced surface area, good CP quality has been obtained with a 25% overall size reduction. The proposed antenna is lightweight, low profile, simple, and easily produced. The structure’s simulation is made using CST Studio Suite 2014 to compute return loss (S11), gain, and the axial ratio of the antenna while the overall miniaturized antenna’s volume is 77mm×58mm×1.6mm operating at 915MHz.

Circularly Polarized Rectangular Microstrip Patch Antenna with Finite Ground Plane

2015 ◽  
Vol 4 (2) ◽  
pp. 74
Author(s):  
Sanyog Rawat ◽  
Kamlesh Kumar Sharma
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Ground Plane ◽  
Axial Ratio ◽  
Microstrip Patch Antenna ◽  
Simulation Software ◽  
Impedance Bandwidth ◽  
Circularly Polarized ◽  
Microstrip Patch ◽  
Rectangular Patch

<p class="Abstract"><span style="font-weight: normal;">In this paper a new geometry of patch antenna is proposed with improved bandwidth and circular polarization. The radiation performance of circularly polarized rectangular patch antenna is investigated by applying IE3D simulation software and its performance is compared with that of conventional rectangular patch antenna.</span> <span style="font-weight: normal;">Finite Ground truncation technique is used to obtain the desired results. The simulated return loss, axial ratio and smith chart with frequency for the proposed antenna is reported in this paper. It is shown that by selecting suitable ground-plane dimensions, air gap and location of the slits, the impedance bandwidth can be enhanced upto 10.15 % as compared to conventional rectangular patch (4.24%) with an axial ratio bandwidth of 4.05%.</span></p><p> </p><p> </p>

scholarly journals A Broadband Circularly Polarized Stacked Probe-Fed Patch Antenna for UHF RFID Applications

2007 ◽  
Vol 2007 ◽  
pp. 1-8 ◽  
Author(s):  
Hang Leong Chung ◽  
Xianming Qing ◽  
Zhi Ning Chen
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Axial Ratio ◽  
Uhf Rfid ◽  
Circularly Polarized ◽  
Parametric Studies ◽  
Hybrid Coupler ◽  
Rfid Applications ◽  
Uhf Band

A broadband circularly polarized stacked probe-fed antenna suitable for UHF RFID applications is presented and studied. The proposed antenna is fed by two probes which are connected to a hybrid coupler. Two parasitic patches are stacked above a primary probe-fed patch to enhance the bandwidth of the antenna. The optimized antenna prototype achieves gain of more than 6.5 dBic, axial ratio of less than 3.0 dB, and return loss of less than−15 dB over the UHF band of 820–980 MHz (17.7%). Parametric studies are carried out to demonstrate the effects of antenna geometry parameters on the performance. The proposed antenna can be a good candidate for UHF RFID applications.

scholarly journals Circularly Polarized Slotted Microstrip Patch Antenna with Finite Ground Plane

2012 ◽  
Vol 1 (2) ◽  
pp. 97-106
Author(s):  
Sanyog Rawat ◽  
K K Sharma
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Ground Plane ◽  
Axial Ratio ◽  
Microstrip Patch Antenna ◽  
Simulation Software ◽  
Impedance Bandwidth ◽  
Circularly Polarized ◽  
Microstrip Patch ◽  
Rectangular Patch

In this paper a new geometry of circularly polarized patch antenna is proposed with improved bandwidth. The radiation performance of proposed patch antenna is investigated using IE3D simulation software and its performance is compared with that of conventional rectangular patch antenna. The simulated return loss, axial ratio and impedance with frequency for the proposed antenna are reported in this paper. It is shown that by selecting suitable ground-plane dimensions, air gap and location of the slots, the impedance bandwidth can be enhanced upto 10.15% as compared to conventional rectangular patch (4.24%) with an axial ratio bandwidth of 4.05%.DOI: 10.18495/comengapp.12.097106

Microstrip Patch Antenna with Circular Polarization Loaded with Drumsticks Slots

2019 ◽  
Vol 9 (2) ◽  
pp. 260-268
Author(s):  
R.K. Yadav ◽  
Mritunjay Rai ◽  
Manoj Kumar Vishwakarma
Keyword(s):  
Patch Antenna ◽  
Relative Permittivity ◽  
Return Loss ◽  
Axial Ratio ◽  
Microstrip Patch Antenna ◽  
Planar Antenna ◽  
Frequency Range ◽  
Circularly Polarized ◽  
Microstrip Patch ◽  
Coaxial Feed

Background & Objective: In this paper circularly polarized microstrip planar antenna is proposed in the 5-6 GHz frequency range. With the introduction of Drum sticks slot and a coaxial feed the antenna exhibits excellent Return loss and Axial Ratio characteristics during simulation. Further, a wider AR bandwidth is achieved in the antenna 3 with the introduction of central circular slots. The circularly polarized antenna is fabricated using Arlon AD 250 substrate and this paper presents its design and simulation using optimization engine HFSS. Conclusion: The substrate has a relative permittivity of 2.55 and thickness is 0.76mm.Various characteristics like return loss, impedance, gain, BW and directivity are presented.

scholarly journals Gain Enhancement of Microstrip Antenna using Ebg Structure for Wi-Fi Application

2019 ◽  
Vol 9 (1) ◽  
pp. 1213-1217
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Microstrip Patch Antenna ◽  
Simulation Software ◽  
Single Frequency ◽  
Total Size ◽  
Compact Structure ◽  
Gain Enhancement ◽  
Microstrip Patch ◽  
Low Profile

A microstrip patch antenna is low profile antenna mounted over a high impedance electromagnetic bandgap (EBG) substrate is proposed. In this paper, Microstrip patch antenna with rectangular EBG structure is proposed and studied. The proposed antenna has compact structure with a total size of 29.44x38.036mm2 . The designed antenna resonates at Particular Single frequency with improved return loss, VSWR and gain. The resonant frequency of the antenna 2.4GHz without and with EBG and improved return loss of -17.61dB and -18.30dB. With rectangular EBG the antenna gives improved gain of 2.09 dB. The Proposed antenna is simulated by using Simulation software ie.(IE3D) and simulated results are in good with practical antenna characteristics.

scholarly journals A Wideband Single-Fed, Circularly-Polarized Patch Antenna With Enhanced Axial Ratio Bandwidth for UHF RFID Reader Applications

IEEE Access ◽  
2018 ◽  
Vol 6 ◽  
pp. 55883-55892 ◽  
Author(s):  
Junlong Li ◽  
Hui Liu ◽  
Shuai Zhang ◽  
Miaohui Luo ◽  
Yuan Zhang ◽  
...  
Keyword(s):  
Patch Antenna ◽  
Axial Ratio ◽  
Uhf Rfid ◽  
Circularly Polarized ◽  
Rfid Reader

scholarly journals Miniaturized Circularly Polarized Stacked Patch Antenna on Reactive Impedance Surface for Dual-Band ISM and WiMAX Applications

2015 ◽  
Vol 2015 ◽  
pp. 1-10 ◽  
Author(s):  
Kush Agarwal ◽  
Saugata Dutta
Keyword(s):  
Frequency Band ◽  
Patch Antenna ◽  
Axial Ratio ◽  
Dual Band ◽  
Impédance Surface ◽  
Impedance Surface ◽  
Circularly Polarized ◽  
Microstrip Patch ◽  
Lower Band ◽  
Lower Frequency Band

This paper proposes a compact microstrip patch antenna for operating in 2.4 GHz ISM and 3.5 GHz WiMAX bands with circularly polarized (CP) radiation. The CP radiation in dual-bands is a result of two multilayered truncated corner stacked square patches, while the reactive impedance surface (RIS) is used for antenna size miniaturization for the lower operating frequency band. Since the overall lateral antenna dimensions are controlled by the lower frequency band (higher wavelength), reducing the electrical size of the antenna for lower band results in overall smaller antenna dimensions. The measured 3-dB axial ratio bandwidths of the in-house fabricated antenna prototype are 6.1% (2.40–2.55 GHz) for the lower band and 5.7% (3.40–3.60 GHz) for the upper band, while the 10-dBS11bandwidths for the two bands are 8.1% (2.39–2.59 GHz) and 6.9% (3.38–3.62 GHz), respectively. The maximum gain at boresight for the lower band is 2.93 dBic at 2.5 GHz, while the gain for the upper band is 6.26 dBic at 3.52 GHz. The overall volume of the proposed antenna is 0.292λo × 0.292λo × 0.044λo, whereλois the corresponding free-space wavelength at 2.5 GHz.

scholarly journals A Butterfly-Shaped Wideband Microstrip Patch Antenna for Wireless Communication

2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Liling Sun ◽  
Maowei He ◽  
Jingtao Hu ◽  
Yunlong Zhu ◽  
Hanning Chen
Keyword(s):  
Wireless Communications ◽  
Wireless Communication ◽  
Radio Frequency Identification ◽  
Patch Antenna ◽  
Microstrip Antenna ◽  
Return Loss ◽  
Microstrip Patch Antenna ◽  
Rfid Systems ◽  
Microstrip Patch ◽  
Frequency Identification

A novel butterfly-shaped patch antenna for wireless communication is introduced in this paper. The antenna is designed for wideband wireless communications and radio-frequency identification (RFID) systems. Two symmetrical quasi-circular arms and two symmetrical round holes are incorporated into the patch of a microstrip antenna to expand its bandwidth. The diameter and position of the circular slots are optimized to achieve a wide bandwidth. The validity of the design concept is demonstrated by means of a prototype having a bandwidth of about 40.1%. The return loss of the butterfly-shaped antenna is greater than 10 dB between 4.15 and 6.36 GHz. The antenna can serve simultaneously most of the modern wireless communication standards.

Single-feed circularly polarized stacked patch antenna with small-frequency ratio for dual-band wireless applications

2015 ◽  
Vol 8 (8) ◽  
pp. 1207-1213 ◽  
Author(s):  
Sachin Kumar ◽  
Binod K. Kanaujia ◽  
Mukesh K. Khandelwal ◽  
A.K. Gautam
Keyword(s):  
Patch Antenna ◽  
Frequency Ratio ◽  
Axial Ratio ◽  
Dual Band ◽  
Radiation Characteristics ◽  
Small Frequency ◽  
Circularly Polarized ◽  
Wireless Applications ◽  
Microstrip Patch ◽  
Good Agreement

A single-feed dual-band circularly polarized stacked microstrip patch antenna with a small-frequency ratio is presented. Two pair of orthogonal slits is cut on the lower circular patch for achieving circular polarization and truncated corner square patch is used as the upper parasitic element. The frequency ratio of the dual-band is 1.03. The 3 dB axial ratio bandwidth is 1.3% for the upper band and 1.1% for the lower band. Proposed structure is fabricated on the FR-4 epoxy substrate and fed by SMA connector. The measured results are in good agreement with the theoretical and simulated results. The antenna shows stable radiation characteristics in both bands of operation.

scholarly journals Miniaturized Circularly Polarized Implantable Antenna for ISM-Band Biomedical Devices

2017 ◽  
Vol 2017 ◽  
pp. 1-9 ◽  
Author(s):  
Ke Zhang ◽  
Changrong Liu ◽  
Xueguan Liu ◽  
Huiping Guo ◽  
Xinmi Yang
Keyword(s):  
Patch Antenna ◽  
Axial Ratio ◽  
Microstrip Patch Antenna ◽  
Impedance Bandwidth ◽  
Optimized Design ◽  
Circularly Polarized ◽  
Ism Band ◽  
Microstrip Patch ◽  
Compact Size ◽  
Implantable Antenna

A compact circularly polarized antenna operating at 915 MHz industrial, scientific, and medical (ISM) band for biomedical implantable applications is presented and experimentally measured. The proposed antenna can be miniaturized to a large extent with the compact size of 15 × 15 × 1.27 mm3 by means of loading patches to a ring-shaped microstrip patch antenna. An impedance bandwidth of 10.6% (865–962 MHz) for reflection coefficient less than −10 dB can be obtained. Meanwhile, the simulated 3 dB axial-ratio (AR) bandwidth reaches 14 MHz. Finally, the optimized design was fabricated and tested, and the measured results agree well with simulated results.

Sign in / Sign up

Export Citation Format

Share Document