Identification and Performance Test of Bamboo Pulp Fiber and Viscose Fiber

2021 ◽  
Keyword(s):  
Performance Test ◽  
Viscose Fiber ◽  
Pulp Fiber ◽  
Bamboo Pulp ◽  
And Performance

Rancang Bangun Alat Olahan Minyak Kelapa

2016 ◽  
Vol 10 (1) ◽  
pp. 70-77
Author(s):  
Jantri Sirait ◽  
Sulharman Sulharman
Keyword(s):  
Electric Motor ◽  
Performance Test ◽  
Production Capacity ◽  
Coconut Oil ◽  
Heating Time ◽  
Design Tool ◽  
Coconut Milk ◽  
Heating Process ◽  
And Performance ◽  
Time Required

Has done design tool is a tool of refined coconut oil coconut grater, squeezer coconut milk and coconut oil heating, with the aim to streamline the time of making coconut oil and coconut oil increase production capacity. The research method consists of several stages, among others; image creation tool, procurement of materials research, cutting the material - the material framework of tools and performance test tools. The parameters observed during the performance test tools is time grated coconut, coconut milk bleeder capacity, the capacity of the boiler and the heating time of coconut oil. The design tool consists of three parts, namely a tool shaved coconut, coconut milk wringer and coconut milk heating devices. Materials used for the framework of such tools include iron UNP 6 meters long, 7.5 cm wide, 4 mm thick, while the motor uses an electric motor 0.25 HP 1430 rpm and to dampen the rotation electric motor rotation used gearbox with a ratio of round 1 : 60. the results of the design ie the time required for coconut menyerut average of 297 seconds, coconut milk wringer capacity of 5 kg of processes and using gauze pads to filter coconut pulp, as well as the heating process takes ± 2 hours with a capacity of 80 kg , The benefits of coconut oil refined tools are stripping time or split brief coconut average - average 7 seconds and coconut shell can be used as craft materials, processes extortion coconut milk quickly so the production capacity increased and the stirring process coconut oil mechanically.ABSTRAKTelah dilakukan rancang bangun alat olahan minyak kelapa yaitu alat pemarut kelapa, pemeras santan kelapa dan pemanas minyak kelapa, dengan tujuan untuk mengefisiensikan waktu pembuatan minyak kelapa serta meningkatkan kapasitas produksi minyak kelapa. Metode penelitian terdiri dari beberapa tahapan antara lain; pembuatan gambar alat, pengadaan bahan-bahan penelitian, pemotongan bahan - bahan rangka alat dan uji unjuk kerja alat. Parameter yang diamati pada saat uji unjuk kerja alat adalah waktu parut kelapa, kapasitas pemeras santan kelapa, kapasitas tungku pemanas serta waktu pemanasan minyak kelapa. Rancangan alat terdiri dari tiga bagian yaitu alat penyerut kelapa, alat pemeras santan kelapa dan alat pemanas santan kelapa. Bahan yang dipergunakan untuk rangka alat tersebut  yaitu besi UNP panjang 6 meter, lebar 7,5 cm, tebal 4 mm, sedangkan untuk motor penggerak menggunakan motor listrik 0,25 HP 1430 rpm dan untuk meredam putaran putaran motor listrik dipergunakan gearbox  dengan perbandingan putaran 1 : 60. Hasil dari rancangan tersebut yaitu waktu yang dibutuhkan untuk menyerut kelapa rata-rata 297 detik, kapasitas alat pemeras santan kelapa 5 kg sekali proses dan menggunakan kain kassa untuk menyaring ampas kelapa, serta Proses pemanasan membutuhkan waktu ± 2 jam dengan kapasitas 80 kg. Adapun keunggulan alat olahan minyak kelapa ini adalah waktu pengupasan atau belah kelapa singkat rata – rata 7 detik dan tempurung kelapa dapat digunakan sebagai bahan kerajinan, proses pemerasan santan kelapa cepat sehingga kapasitas produksi meningkat dan proses pengadukan minyak kelapa secara mekanis. Kata kunci : penyerut, pemeras, pemanas,minyak kelapa,olahan minyak kelapa.

scholarly journals Design and performance test of variable diameter threshing drum of combine harvester

2021 ◽  
Author(s):  
Zhan Su ◽  
Zhao Ding ◽  
Liquan Tian ◽  
Xue Lin ◽  
Zhiming Wang
Keyword(s):  
Performance Test ◽  
Variable Diameter ◽  
Combine Harvester ◽  
And Performance

Physical and performance characteristics related to starter status, position, and division in Japanese collegiate American-football players

2021 ◽  
pp. 1-8
Author(s):  
Junta Iguchi ◽  
Minoru Matsunami ◽  
Tatsuya Hojo ◽  
Yoshihiko Fujisawa ◽  
Kenji Kuzuhara ◽  
...  
Keyword(s):  
Performance Test ◽  
Vertical Jump ◽  
American Football ◽  
Football Players ◽  
Jump Height ◽  
Test Results ◽  
Repetition Maximum ◽  
Vertical Jump Height ◽  
Division 1 ◽  
And Performance

BACKGROUND: Few studies have investigated the variations in body composition and performance in Japanese collegiate American-football players. OBJECTIVE: To clarify what characterizes competitors at the highest levels – in the top division or on the starting lineup – we compared players’ body compositions and performance test results. METHODS: This study included 172 players. Each player’s body composition and performance (one-repetition maximum bench press, one-repetition maximum back squat, and vertical jump height) were measured; power was estimated from vertical jump height and body weight. Players were compared according to status (starter vs. non-starter), position (skill vs. linemen), and division (1 vs. 2). Regression analysis was performed to determine characteristics for being a starter. RESULTS: Players in higher divisions and who were starters were stronger and had more power, greater body size, and better performance test results. Players in skill positions were relatively stronger than those in linemen positions. Vertical jump height was a significant predictor of being a starter in Division 1. CONCLUSION: Power and vertical jump may be a deciding factor for playing as a starter or in a higher division.

scholarly journals Development of High-Performance Face Gear Set (Machining and Performance Test)

2011 ◽  
Vol 77 (775) ◽  
pp. 573-581
Author(s):  
Isamu TSUJI ◽  
Hiroshi GUNBARA ◽  
Kazumasa KAWASAKI ◽  
Yoshikazu ABE ◽  
Kazutaka SUZUKI ◽  
...  
Keyword(s):  
High Performance ◽  
Performance Test ◽  
Face Gear ◽  
And Performance

Research on Mechanical Properties of Several New Regenerated Cellulose Fibers

2011 ◽  
Vol 332-334 ◽  
pp. 489-495 ◽  
Author(s):  
Rong Zhou ◽  
Ming Xia Yang
Keyword(s):  
Mechanical Properties ◽  
Phase Change Materials ◽  
Cellulose Fiber ◽  
Cellulose Fibers ◽  
Regenerated Cellulose ◽  
Pulp Fiber ◽  
Pulp Fibers ◽  
Bast Fiber ◽  
Bamboo Pulp ◽  
Lyocell Fiber

Regenerated cellulose fiber is the most widely-used and most variety of cellulose fiber. Five categories and ten kinds of fibers such as lyocell fiber, modal fiber, bamboo pulp fiber, sheng-bast fiber, Outlast viscose fiber were chosen as the research object. The strength property and elasticity of fibers in dry and wet state were tested and analysis. The comprehensive performances of fabrics were studied and mechanical properties of the fibers were listed in the order from good to bad by grey clustering analysis. The results show lyocell G100 and lyocell LF have better comprehensive mechanical properties ,while other new regenerated cellulose fibers’ comprehensive mechanical properties are general. Among these fibers modal fiber’s comprehensive mechanical properties are slightly better than sheng-bast fibers’ and bamboo pulp fibers’. Modal fiber, sheng-bast fiber and Bamboo pulp fiber have no significantly poor single parameter and all of them have better comprehensive mechanical properties than various viscose fibers. Outlast viscose in which has been added phase change materials sensitive to temperature by Microcapsule techniques fundamentally keeps similar comprehensive mechanical properties with other regenerated cellulose fibers,but its properties decline slightly .

Performance of Asphalt Mixture Used for Asphalt Treated Base of Perpetual Pavements

2011 ◽  
Vol 415-417 ◽  
pp. 1531-1536
Author(s):  
Fu Ming Liu ◽  
Duan Yi Wang
Keyword(s):  
Tensile Strain ◽  
Performance Test ◽  
Asphalt Mixture ◽  
Fatigue Tests ◽  
Asphalt Pavements ◽  
Moisture Susceptibility ◽  
Scale Test ◽  
And Performance ◽  
Wheel Tracking ◽  
Fatigue Endurance

This paper presents the results of laboratory and performance tests for an asphalt treated base (ATB) and mixes developed in this study for perpetual asphalt pavements. Laboratory tests for the mixes included moisture susceptibility, wheel tracking and fatigue tests. The results of performance test indicated that the resistances of the high content binder ATB against moisture and fatigue damage were better than those of the lower one. It was also found from the full scale test sections that the tensile strain values at the bottom of the asphalt layer for the ATB sections were low when the asphalt layer thicknesses of the ATB sections were not thicker than those of the conventional sections. All the tensile strain values measured from the ATB sections were within the fatigue endurance limit of 70 microstrain which is the fatigue criterion of a perpetual asphalt pavement.

Sign in / Sign up

Export Citation Format

Share Document