Construction Progress Control and Management

2021 ◽  
Keyword(s):  
Progress Control ◽  
Control And Management

scholarly journals Construction Progress Control And Management Measures Analysis

2018 ◽  
Author(s):  
Jie Fang ◽  
Yan Li ◽  
Qi Liao ◽  
Zenghui Ren ◽  
Baohong Xie
Keyword(s):  
Influence Factors ◽  
Schedule Control ◽  
Engineering Project ◽  
Construction Engineering ◽  
Engineering Construction ◽  
Progress Control ◽  
Management Measures ◽  
Control And Management ◽  
Construction Schedule ◽  
And Control

The construction schedule control of construction project is within the prescribed period of time to develop a scientific and reasonable plan, and when executed timely check construction progress, the knowledge of construction progress, and then analyzed the construction plan, timely correcting and deal with the deviation, and take effective solutions to promote the project smoothly.Construction engineering plays an important role in economic development, so it can guarantee the quality of construction.This paper analyzes the management of construction engineering construction progress control and control methods of construction engineering project, the aiming at the influence factors of construction engineering construction progress, the control and management measures are put forward for reference.

scholarly journals Construction Progress Control And Management Measures Analysis

2018 ◽  
Vol 2 (1) ◽  
Author(s):  
Jie Fang ◽  
Yan Li ◽  
Qi Liao ◽  
Zenghui Ren ◽  
Baohong Xie
Keyword(s):  
Influence Factors ◽  
Schedule Control ◽  
Engineering Project ◽  
Construction Engineering ◽  
Engineering Construction ◽  
Progress Control ◽  
Management Measures ◽  
Control And Management ◽  
Construction Schedule ◽  
And Control

The construction schedule control of construction project is within the prescribed period of time to develop a scientific and reasonable plan, and when executed timely check construction progress, the knowledge of construction progress, and then analyzed the construction plan, timely correcting and deal with the deviation, and take effective solutions to promote the project smoothly.Construction engineering plays an important role in economic development, so it can guarantee the quality of construction.This paper analyzes the management of construction engineering construction progress control and control methods of construction engineering project, the aiming at the influence factors of construction engineering construction progress, the control and management measures are put forward for reference.

UNIVERSAL DIGITAL CONTROL SYSTEM OF A MACHINE AND TRACTOR AGGREGATES

1970 ◽  
pp. 10-14
Author(s):  
А. Yu. Izmaylov ◽  
Ya. P. Lobachevskiy ◽  
V. К. Khoroshenkov ◽  
N. Т. Goncharov ◽  
S. E. Lonin ◽  
...  
Keyword(s):  
Control System ◽  
Automatic Control ◽  
Digital Control ◽  
Crop Protection ◽  
Automatic Regulation ◽  
Regulation System ◽  
Information Control ◽  
Operational Parameters ◽  
Technological Processes ◽  
Control And Management

The introduction of information and digital technologies that support and support all technological processes in the field is an urgent need for the development and implementation of such technology. An organisationally complex and financially intensive project is necessary because of the wide variety of economic entities that differ in the size of production, forms of ownership and socio-economic conditions of production. Automated information control system for mobile units agricultural enterprise provides those-Niko-economic performance, optimum capacity utilization through the use of timely and reliable information on technology. Machine and tractor aggregates are appertained as control objects with variable structure, which is explained by possibility of the system formation from tractor or field machines mobile units with various purposes: tillable, cultivatable, sowing, harvesting and etc. This MTA feature was determined creation of digital control systems of two groups of automatic control and management of the basic energy and operational parameters: tractors, machines and vehicles as part of MTA. To the first group are appertained the automatic control system of tractor motor component loading, motion speed, frictional sliding. To the second group – automatic regulation system of operating depth, seed rate, treatment of liquid combined fertilizers and crop protection agents, filling and driving of various MTA. Novelty of researches consists in methodology of the organization of the centralized control and management of various technological processes at carrying out field works.

Development of hardware and software system for access control and management

Ergodesign ◽  
2020 ◽  
Vol 2020 (1) ◽  
pp. 19-24
Author(s):  
Igor Pestov ◽  
Polina Shinkareva ◽  
Sofia Kosheleva ◽  
Maxim Burmistrov
Keyword(s):  
Access Control ◽  
High Mobility ◽  
Raspberry Pi ◽  
Software System ◽  
Hardware System ◽  
Software And Hardware ◽  
Arduino Uno ◽  
Control And Management ◽  
Hardware Platforms ◽  
Hardware And Software System

This article aims to develop a hardware-software system for access control and management based on the hardware platforms Arduino Uno and Raspberry Pi. The developed software and hardware system is designed to collect data and store them in the database. The presented complex can be carried and used anywhere, which explains its high mobility.

Access of Key Population to Available HIV and TB Services in Nepal: A Cross Section Study

2019 ◽  
Vol 17 (1) ◽  
pp. 17-23
Author(s):  
B.B. Subba ◽  
N. Rimal ◽  
B.M. Shrestha
Keyword(s):  
Viral Load ◽  
Cross Section ◽  
General Knowledge ◽  
Cross Sectional Survey ◽  
Cross Sectional ◽  
Key Population ◽  
Mdr Tb ◽  
Study Population ◽  
Control And Management ◽  
Structured Questionnaire

Introduction: TB is considered one of the opportunistic infection among PLHIV. The increasing burden of HIV/TB co-infection among key population cause problem to maintain adherence to ART and DOTS services. The emergence of MDR-TB is one of the greatest challenge to control and management of both diseases. However, having knowledge and information of both diseases are important role to access the available HIV/TB services. Methods: A cross-sectional survey was conducted among key population who had HIV/TB co-infection in two-epidemic zone of Nepal. A pretested semi-structured questionnaire was used to collect data. ANOVA test was done to analyze the collected data by using SPSS version 20.0. Results: A total of 343 HIV/TB co-infected individuals were enrolled to the study. Most of participants were from ART and DOTS clients. Therefore, the study found that there was significance difference found between knowledge about TB (F=4.400, p= 0.005), causative agent of TB (F=3.160, p=0.025), risk of TB illness among PLHIV (F=8.491, p=0.001) and among key affected population. Moreover, there was significance difference found between access to OI treatment (F=5.113, p=0.002) and access to viral load (F=4.642, p=0.003) among key study population. In gender perspective, there was no significance difference to use and access to available HIV/TB services. Conclusion: The general knowledge on HIV/TB co-infection was significant association with key population. The knowledge on HIV/TB and access to NGOs’ help can significant effect to access the available HIV and TB services.

Evaluation of the effectiveness of different image skeletonization methods in biometric security systems

2020 ◽  
Vol 10 ◽  
Author(s):  
Mariya Nazarkevych ◽  
Serhii Dmytruk ◽  
Volodymyr Hrytsyk ◽  
Olha Vozna ◽  
Anzhela Kuza ◽  
...  
Keyword(s):  
Experimental Studies ◽  
Fingerprint Recognition ◽  
Good Time ◽  
Gabor Filtering ◽  
Security Systems ◽  
Thinning Algorithm ◽  
Biometric Security ◽  
Recognition Quality ◽  
Control And Management ◽  
The Internet Of Things

Background: Systems of the Internet of Things are actively implementing biometric systems. For fast and high-quality recognition in sensory biometric control and management systems, skeletonization methods are used at the stage of fingerprint recognition. The analysis of the known skeletonization methods of Zhang-Suen, Hilditch, Ateb-Gabor with the wave skeletonization method has been carried out and it shows a good time and qualitative recognition results. Methods: The methods of Zhang-Suen, Hildich and thinning algorithm based on Ateb-Gabor filtration, which form the skeletons of biometric fingerprint images, are considered. The proposed thinning algorithm based on Ateb-Gabor filtration showed better efficiency because it is based on the best type of filtering, which is both a combination of the classic Gabor function and the harmonic Ateb function. The combination of this type of filtration makes it possible to more accurately form the surroundings where the skeleton is formed. Results: Along with the known ones, a new Ateb-Gabor filtering algorithm with the wave skeletonization method has been developed, the recognition results of which have better quality, which allows to increase the recognition quality from 3 to 10%. Conclusion: The Zhang-Suen algorithm is a 2-way algorithm, so for each iteration, it performs two sets of checks during which pixels are removed from the image. Zhang-Suen's algorithm works on a plot of black pixels with eight neighbors. This means that the pixels found along the edges of the image are not analyzed. Hilditch thinning algorithm occurs in several passages, where the algorithm checks all pixels and decides whether to replace a pixel from black to white if certain conditions are satisfied. This Ateb-Gabor filtering will provide better performance, as it allows to obtain more hollow shapes, organize a larger range of curves. Numerous experimental studies confirm the effectiveness of the proposed method.

DEVELOPMENT OF AN INTELLIGENT MACHINE FOR SORTING ANIMALS ACCORDING TO SPECIFIED CRITERIA

2020 ◽  
Vol 4 (41) ◽  
pp. 83-87
Author(s):  
ALEKSEY SEDOV ◽  
Keyword(s):  
Control System ◽  
Control Unit ◽  
Research Purpose ◽  
Identification System ◽  
Intelligent Machine ◽  
Modbus Protocol ◽  
Automatic Sorting ◽  
Animal Identification ◽  
Software Modules ◽  
Control And Management

The Federal scientific Agroengineering center VIM has developed technical tools, algorithms and software for the intelligent automatic control system for milking animals “Stimul” on the “Herringbone” milking unit in three versions. The created system does not include automatic selection gates for effective management of zootechnical and veterinary services of animals. (Research purpose) The research purpose is in developing an intelligent machine for automatic sorting of animals for servicing and managing the herd according to specified characteristics. (Materials and methods) The article presents the development of control and management systems in dairy farming based on the conceptual principles of digital transformation. The digital control system is based on a multifunctional panel controller. The created control unit has a port for connecting to the RS 485 network and provides support for network functions via the Modbus Protocol. The programming of the control unit has been made in the SMLogix tool environment, which supports the FBD function block language. (Results and discussion) The article presents an intelligent machine for automatic sorting of animal flows for servicing and managing the herd according to specified characteristics with the unification of hardware, software modules and interface. The article describes the necessary parameters for the automatic remote animal identification system, the basic component of the control system of an intelligent machine for sorting animals according to specified characteristics. (Conclusions) The machine allows to automatically identify, sort and send animals to the specified areas for individual service.

Sign in / Sign up

Export Citation Format

Share Document