scholarly journals MUTUAL COUPLING EFFECT ON MIMO ANTENNA

2014 ◽  
pp. 247-250
Author(s):  
BHUSHAN R. KALAMKAR ◽  
SACHIN S. KHADE ◽  
B.L. BADJATE
Keyword(s):  
Antenna Array ◽  
Mutual Coupling ◽  
Mimo Systems ◽  
Coupling Effect ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Correlation Coefficients ◽  
Mimo Antenna ◽  
Input Multiple Output ◽  
Plate Antenna

To reduce mutual coupling effect on MIMO Antenna this paper presents the analysis of bent ground plane antennas for multiple-input-multiple-output (MIMO). First, the three plate antenna array patterns of the envelope correlation coefficients are proposed to evaluate the diversity performance of antennas in MIMO systems. Following this, a compact three-element suspended plate antenna array with a bent ground plane is presented. The diversity performance of the design is experimentally and numerically analysed.

scholarly journals Bandwidth Enhancement and Mutual Coupling Reduction Using a Notch and a Parasitic Structure in a UWB-MIMO Antenna

2019 ◽  
Vol 2019 ◽  
pp. 1-9 ◽  
Author(s):  
Jiwan Ghimire ◽  
Kwang-Wook Choi ◽  
Dong-You Choi
Keyword(s):  
Mutual Coupling ◽  
Mimo Systems ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Back Side ◽  
Bandwidth Enhancement ◽  
Mimo Antenna ◽  
Input Multiple Output

The correlation between the antennas of multiple-input, multiple-output (MIMO) systems in limited spaces and size degrades the performance and capacity by either using complex coupling or decoupling structures. For isolation improvement, this paper presents the simple design of a compact high-isolation ultra-wideband (UWB) MIMO antenna with a circular parasitic element at the back side of the radiating patch, thereby creating the reverse coupling and helping reduce the mutual coupling at the upper part of the frequency bands, and a small rectangular notch at the ground plane to extend the impedance bandwidth of the monopole antenna. This approach eliminates the use of complex coupling or decoupling structures and complex feeding networks. A novel feature of our design is that the MIMO antenna exhibits a very low envelope correlation coefficient (ECC < 0.007) with high diversity gain (DG > 9.99) and wide impedance bandwidth of 139 % from 3.1 to 17.5 GHz applicable for not only UWB application, but also next generation wireless communication, 5G. The high peak gain over the entire UWB and the upper part of the overall frequency band ensure that the antenna can be used in MIMO applications owing to the close agreement between the simulated and measured results.

scholarly journals Mutual Coupling Reduction of DRA for MIMO Applications

2019 ◽  
Vol 8 (1) ◽  
pp. 75-81
Author(s):  
N. Al Shalaby ◽  
S. G. El-Sherbiny
Keyword(s):  
Mutual Coupling ◽  
Dielectric Material ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Antenna System ◽  
Parasitic Element ◽  
Mimo Antenna ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Element Method

In this paper, A multiple input Multiple Output (MIMO) antenna using two Square Dielectric Resonators (SDRs) is introduced. The mutual coupling between the two SDRAs is reduced using two different methods; the first method is based on splitting a spiral slot in the ground plane, then filling the slot with dielectric material, "E.=2.2". The second method is based on inserting a copper parasitic element, having the same shape of the splitted Spiral, between the two SDRAs.  The effect of replacing the copper parasitic element with Carbon nanotubes (CNTs) parasitic element "SOC12 doped long-MWCNT BP" is also studied. The antenna system is designed to operate at 6 GHz. The analysis and simulations are carried out using finite element method (FEM). The defected ground plane method gives a maximum isolation of l8dB at element spacing of 30mm (0.6λo), whereas the parasitic element method gives a maximum isolation of 42.5dB at the same element spacing.

scholarly journals Minimization of Mutual Coupling Using Neutralization Line Technique for 2.4 GHz Wireless Applications

2015 ◽  
Vol 6 (3) ◽  
pp. 1-15 ◽  
Author(s):  
Wan Noor Najwa Wan Marzudi ◽  
Zuhairiah Zainal Abidin ◽  
Siti Zarina Mohd Muji ◽  
Yue Ma ◽  
Raed A. Abd-Alhameed
Keyword(s):  
Reflection Coefficient ◽  
Mutual Coupling ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Impedance Bandwidth ◽  
Mimo Antenna ◽  
Mimo Antennas ◽  
Wireless Applications ◽  
Input Multiple Output ◽  
Neutralization Line

This paper presented a planar printed multiple-input-multiple-output (MIMO) antenna with a dimension of 100 x 45 mm2. It composed of two crescent shaped radiators placed symmetrically with respect to the ground plane. Neutralization line applied to suppress mutual coupling. The proposed antenna examined both theoretically and experimentally, which achieves an impedance bandwidth of 18.67% (over 2.04-2.46 GHz) with a reflection coefficient < -10 dB and mutual coupling minimization of < -20 dB. An evaluation of MIMO antennas is presented, with analysis of correlation coefficient, total active reflection coefficient (TARC), capacity loss and channel capacity. These characteristics indicate that the proposed antenna suitable for some wireless applications.

scholarly journals Mutual Coupling Reduction Using a Protruded Ground Branch Structure in a Compact UWB Owl-Shaped MIMO Antenna

2018 ◽  
Vol 2018 ◽  
pp. 1-10 ◽  
Author(s):  
A. Mchbal ◽  
N. Amar Touhami ◽  
H. Elftouh ◽  
A. Dkiouak
Keyword(s):  
Mutual Coupling ◽  
Impedance Matching ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Monopole Antenna ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Mimo Antenna ◽  
Input Multiple Output ◽  
Uwb Applications

A compact ultra-wideband (UWB) multiple input-multiple output (MIMO) antenna with high isolation is designed for UWB applications. The proposed MIMO antenna consists of two identical monopole antenna elements. To enhance the impedance matching, three slots are formed on the ground plane. The arc structure as well as the semicircle with an open-end slot is employed on the radiating elements the fact which helps to extend the impedance bandwidth of the monopole antenna from 3.1 up to 10.6 GHz, which corresponds to the UWB band. A ground branch decoupling structure is introduced between the two elements to reduce the mutual coupling. Simulation and measurement results show a bandwidth range from 3.1 to 11.12 GHz with |S11_|<−15 dB, |S21_|<−20 dB, and ECC < 0.002.

Compact 2x2 and 4x4 MIMO Antenna Systems for 5G Automotive Applications

2021 ◽  
Vol 36 (6) ◽  
pp. 762-778
Author(s):  
Mohamed Khalifa ◽  
Ahmad Yacoub ◽  
Daniel Aloi
Keyword(s):  
Mimo Systems ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Compact Structure ◽  
Mimo Antenna ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Passive Isolation ◽  
The Individual ◽  
Antenna Systems

In this paper, three Vehicular multiple-input multiple-output (MIMO) 5G antenna systems have been constructed from using a newly developed 5G cellular branched Monopole element are presented. The MIMO systems operates in the 5G frequency bands (617MHz- 5GHz) with a compact structure that allows for up to four elements to be integrated in the same Sharkfin. The 3 configurations of MIMO systems have been simulated using HFSS, measured on a 1-meter ground plane (GND), then measured on a vehicle roof and the individual antenna parameters in terms of reflection coefficient and efficiency have captured. The MIMO antenna systems performance in terms of passive isolation, combined radiation pattern, envelope correlation coefficient (ECC), and diversity gain (DG) have been reported and discussed.

scholarly journals A Compact Dual-Band CPW-Fed MIMO Antenna for Indoor Applications

2019 ◽  
Vol 2019 ◽  
pp. 1-7
Author(s):  
Mohamed M. Morsy
Keyword(s):  
Coupling Effect ◽  
Impedance Matching ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Surface Current ◽  
Dual Band ◽  
Single Element ◽  
Mimo Antenna ◽  
Input Multiple Output ◽  
Parametric Studies

A compact dual-band multiple-input-multiple-output (MIMO) antenna for LTE700, GSM1900, and UMTS applications with high isolation is presented. To enhance impedance matching and multiband operation, two inverted L-shaped monopoles are printed in the circular slot of the ground plane. The single element design is mirrored along the diameter of the circular slot of the ground plane. A strip is employed between the two radiators in order to mitigate the mutual coupling effect and enhance the impedance matching at operating bandwidths. Moreover, two slits are inserted in the ground plane in order to disturb the current distribution between radiating elements, and hence, the isolation between elements is improved. The measured 10 dB return loss bandwidth is 100 MHz (698–798 MHz) and 359 MHz (1765-2124 MHz) over the LTE700, GSM1900, and UMTS bands. The measured isolation between the two ports is less than -13 dB over the LTE700 bands while it is recorded to be less than -17 dB over the GSM1900 and UMTS bands. In addition, parametric studies of the proposed MIMO antenna are performed, and the surface current analysis is discussed to show the effect of the isolation structure. The radiation patterns are measured, and envelope correlation coefficient is calculated. The simulated results are in good agreement with measurements.

Dual circular slot ring triple-band MIMO antenna for 5G applications

Frequenz ◽  
2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Anand Kumar ◽  
Santosh Kumar Mahto ◽  
Rashmi Sinha ◽  
Arvind Choubey
Keyword(s):  
Mutual Coupling ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Mobile Terminal ◽  
High Gain ◽  
Mimo Antenna ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Smart Wearable ◽  
Triple Band

AbstractA Triple-band Multiple-Input-Multiple-Output (MIMO) antenna for 5G mobile terminal applications is proposed in this paper. The design comprises four-port/two resonators, each having two concentric circular slot ring radiators etched on a ground plane of size 50 mm ${\times}$ 50 mm. The antenna is fed by perpendicularly arranged 50 Ω microstrip line feeds on the top layer. Decoupling techniques were used to suppress mutual coupling between the two resonators. The perpendicular arrangement of the feed lines and port reduces mutual coupling between the two ports and increases isolation. The antenna operates in multiple bands: 3.35–3.69 GHz, 24–28 GHz, and 37–40 GHz frequency range with central frequencies at 3.5 GHz, 26 GHz, and 38 GHz, respectively allocated for 5G. The antenna provides a gain of 2.7–7.8 dB and a radiation efficiency of 0.49–0.85 in the operating bands. Diversity performance is studied in terms of the Envelop Correlation Coefficient (ECC), Diversity Gain (DG), and Total Active Reflection Coefficient (TARC) were found to be less than 0.01, greater than 9.99 dB, and less than −10 dB respectively. The proposed antenna offers good S-parameters, voltage standing wave ratio (VSWR), TARC, radiation pattern, high gain, and low ECC. The antenna was fabricated and tested. The measured results and simulated results are in good agreement. It possesses sufficient potential for 5G mobile terminal and smart wearable applications.

scholarly journals 45 degree arrangement of compact array antenna for MIMO application

2019 ◽  
Vol 15 (2) ◽  
pp. 838
Author(s):  
M. F. Ismail ◽  
H. A. Majid ◽  
C. Macwright ◽  
M. N. A. H. Shaabani ◽  
M. S. Mohd ◽  
...  
Keyword(s):  
Mutual Coupling ◽  
Coupling Effect ◽  
Multiple Input Multiple Output ◽  
Rectangular Array ◽  
Mimo Antenna ◽  
Compact Antenna ◽  
Microstrip Patch ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Compact Array

A study on the compact array microstrip patch antenna for multiple-input multiple-output (MIMO) communication system based on the antenna arrangement is performed. The 2.45 GHz rectangular array are arranged in 45 degree slanted inward and outward for each other to reduce the mutual coupling effect between the patches. The antenna properties are analyzed and compact antenna design is determined based on the simulation results. The results show the antennas can very compact while maintaining low mutual coupling. The gain of the MIMO antenna is 11.3 dBi. The simulated and tested return losses, together with the radiation patterns, are presented and discussed.

scholarly journals Design and Implementation of MIMO Antenna Using Swastika Slot for Wireless Applications

2019 ◽  
Vol 8 (3) ◽  
pp. 3972-3976
Keyword(s):  
Mutual Coupling ◽  
Mimo Systems ◽  
Multiple Input Multiple Output ◽  
Multipath Fading ◽  
Substrate Material ◽  
Signal Loss ◽  
Mimo Antenna ◽  
Mimo Antennas ◽  
Input Multiple Output ◽  
5 Ghz

MIMO (Multiple-Input Multiple-Output) antenna has gained a lot of attention for research today due to various advantages such as increase in capacity, low signal loss, and less multipath fading. The main objective of this work is to design and implement a compact antenna using MIMO systems to reduce the mutual coupling between the antenna elements and to provide high isolation for Wi-Fi (2.4 GHz to 5 GHz) & Bluetooth (2.4 GHz to 2.57 GHz) and WLAN 802.11(2.4-2.485 GHz) applications. Different shapes of MIMO antennas are implemented but they have some interference with high mutual coupling and low gain. In order to avoid this, “Dumbell” shaped patch is introduced with a ‘Swastika’ slot between the patches. The antenna is designed over a frequency of 2.51GHz using FR4 epoxy as a substrate material. The proposed antenna shows better performance than many existing systems with an overall size of 93.02 × 54.72 mm2 having isolation better than -16 dB, obtained gain of 8.29 dB and envelope correlation coefficient (ECC) is investigated about 0.0092. The proposed MIMO antenna is simulated using HFSS 18.0 (High Frequency Structural Simulator) software and fabricated to validate the results. It is clearly observed that simulated results are close to practical measured results.

scholarly journals Design of Multi-Mode Antenna Array for Use in Next-Generation Mobile Handsets

Sensors ◽  
2020 ◽  
Vol 20 (9) ◽  
pp. 2447
Author(s):  
Naser Ojaroudi Parchin ◽  
Haleh Jahanbakhsh Basherlou ◽  
Raed A. Abd-Alhameed
Keyword(s):  
Antenna Array ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Antenna System ◽  
Cellular Systems ◽  
Good Efficiency ◽  
Mimo Antenna ◽  
Fifth Generation ◽  
Input Multiple Output ◽  
Multi Mode

In this study, a new design of a tri-band multiple-input–multiple-output (MIMO) antenna array is proposed for fifth-generation (5G) cellular systems. Its structure is composed of eight identical planar-inverted F antenna (PIFA) elements placed at different edge corners of the handset mainboard with overall dimensions of 150 × 75 mm2. The PIFA elements and ground plane of the MIMO antenna system are arranged on the back layer of the platform, which makes the design easy to integrate with the handset circuit. For S11 ≤ −10 dB, the radiation elements of the MIMO design operate at the frequency ranges of 2.5–2.7 GHz, 3.4–3.75 GHz, and 5.6–6 GHz covering the long-term evolution (LTE) 41, 42/43, and 47 operation bands, respectively. The array achieves better than 15 dB return loss results across the three operating bands. The presented antenna array not only exhibits multi-band operation but also generates the polarization diversity characteristic, which makes it suitable for multi-mode operation. The proposed antenna array was simulated and experimentally tested. Fundamental characteristics of the proposed design are investigated. It offers three band S-parameters with acceptable isolation and dual-polarized radiation with quite good efficiency and gain results. Besides this, the total active reflection coefficient (TARC) and envelope correlation coefficient (ECC) results of the PIFAs are very low over the bands. In addition, the radiation characteristics of the MIMO antenna in the presence of the user and handset components are studied. Moreover, a new and compact phased array millimeter-wave (MM-Wave) antenna with broad bandwidth and end-fire radiation is introduced which can be easily integrated into the smartphone antenna system. Due to its good performance and simple structures, the proposed smartphone antenna array design is a good candidate for future multi-mode 5G cellular applications.

Sign in / Sign up

Export Citation Format

Share Document