scholarly journals LOCATION AWARE CLUSTER BASED ROUTING IN WIRELESS SENSOR NETWORKS

2015 ◽  
pp. 36-41
Author(s):  
S. JERUSHA ◽  
K. KULOTHUNGAN ◽  
A Kannan
Keyword(s):  
Wireless Sensor Networks ◽  
Sensor Network ◽  
Network Lifetime ◽  
Minimum Distance ◽  
Sensor Node ◽  
Cluster Head ◽  
Residual Energy ◽  
Base Station ◽  
Sensor Nodes ◽  
Wireless Sensor

Wireless sensor nodes are usually embedded in the physical environment and report sensed data to a central base station. Clustering is one of the most challenging issues in wireless sensor networks. This paper proposes a new cluster scheme for wireless sensor network by modified the K means clustering algorithm. Sensor nodes are deployed in a harsh environment and randomly scattered in the region of interest and are deployed in a flat architecture. The transmission of packet will reduce the network lifetime. Thus, clustering scheme is required to avoid network traffic and increase overall network lifetime. In order to cluster the sensor nodes that are deployed in the sensor network, the location information of each sensor node should be known. By knowing the location of the each sensor node in the wireless sensor network, clustering is formed based on the highest residual energy and minimum distance from the base station. Among the group of nodes, one node is elected as a cluster head using centroid method. The minimum distance between the cluster node’s and the centroid point is elected as a cluster head. Clustering of nodes can minimize the residual energy and maximize the network performance. This improves the overall network lifetime and reduces network traffic.

scholarly journals Optimization of Energy Efficient Advance Leach Protocol

2021 ◽  
Vol 9 (5) ◽  
pp. 07-16
Author(s):  
Sandeep Kaur ◽  
Dr. Rajeev Bedi ◽  
Mohit Marwaha
Keyword(s):  
Wireless Sensor Networks ◽  
Energy Conservation ◽  
Network Lifetime ◽  
Energy Efficient ◽  
Sensor Node ◽  
Cluster Head ◽  
Base Station ◽  
Wireless Sensor ◽  
Cluster Head Selection ◽  
Leach Protocol

In WSNs, the only source to save life for the node is the battery consumption. During communication with other area nodes or sensing activities consumes a lot of power energy in processing the data and transmitting the collected/selected data to the sink. In wireless sensor networks, energy conservation is directly to the network lifetime and energy plays an important role in the cluster head selection. A new threshold has been formulated for cluster head selection, which is based on remaining energy of the sensor node and the distance from the base station. Proposed approach selects the cluster head nearer to base station having maximum remaining energy than any other sensor node in multi-hop communication. The multi hop approach minimizing the inter cluster communication without effecting the data reliability.

A Node Authentication Model in Wireless Sensor Networks With Locked Cluster Generation

2021 ◽  
pp. 236-250
Author(s):  
C. R. Bharathi ◽  
Alapati Naresh ◽  
Arepalli Peda Gopi ◽  
Lakshman Narayana Vejendla
Keyword(s):  
Wireless Sensor Networks ◽  
Sensor Networks ◽  
Sensor Node ◽  
Cluster Formation ◽  
Cluster Head ◽  
Base Station ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Cluster Generation ◽  
Secure Network

In wireless sensor networks (WSN), the majority of the inquiries are issued at the base station. WSN applications frequently require collaboration among countless sensor nodes in a network. One precedent is to persistently screen a region and report occasions. A sensor node in a WSN is initially allocated with an energy level, and based on the tasks of that sensor node, energy will be reduced. In this chapter, two proposed methods for secure network cluster formation and authentication are discussed. When a network is established then all the nodes in it must register with cluster head and then authentication is performed. The selection of cluster head is done using a novel selection algorithm and for authenticating the nodes. Also, a novel algorithm for authentication is used in this chapter. The validation and authorization of nodes are carried over by managing the keys in WSN. The results have been analyzed using NS2 simulator with an aid of list of relevant parameters.

Salp

2020 ◽  
pp. 41-56 ◽  
Author(s):  
Vrajesh Kumar Chawra ◽  
Govind P. Gupta
Keyword(s):  
Wireless Sensor Networks ◽  
Network Lifetime ◽  
Cluster Head ◽  
Residual Energy ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Cluster Head Selection ◽  
Research Issue ◽  
Energy Hole ◽  
Node Clustering

The formation of the unequal clusters of the sensor nodes is a burning research issue in wireless sensor networks (WSN). Energy-hole and non-uniform load assignment are two major issues in most of the existing node clustering schemes. This affects the network lifetime of WSN. Salp optimization-based algorithm is used to solve these problems. The proposed algorithm is used for cluster head selection. The performance of the proposed scheme is compared with the two-node clustering scheme in the term of residual energy, energy consumption, and network lifetime. The results show the proposed scheme outperforms the existing protocols in term of network lifetime under different network configurations.

scholarly journals An Energy-Aware Method for Selecting Cluster Heads in Wireless Sensor Networks

2020 ◽  
Vol 10 (21) ◽  
pp. 7886
Author(s):  
Atefeh Rahiminasab ◽  
Peyman Tirandazi ◽  
M. J. Ebadi ◽  
Ali Ahmadian ◽  
Mehdi Salimi
Keyword(s):  
Wireless Sensor Networks ◽  
Sensor Networks ◽  
Network Lifetime ◽  
Cluster Head ◽  
Base Station ◽  
Energy Resources ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Dynamic Clustering ◽  
Clustering Protocol

Wireless sensor networks (WSNs) include several sensor nodes that have limited capabilities. The most critical restriction in WSNs is energy resources. Moreover, since each sensor node’s energy resources cannot be recharged or replaced, it is inevitable to propose various methods for managing the energy resources. Furthermore, this procedure increases the network lifetime. In wireless sensor networks, the cluster head has a significant impact on system global scalability, energy efficiency, and lifetime. Furthermore, the cluster head is most important in combining, aggregating, and transferring data that are received from other cluster nodes. One of the substantial challenges in a cluster-based network is to choose a suitable cluster head. In this paper, to select an appropriate cluster head, we first model this problem by using multi-factor decision-making according to the four factors, including energy, mobility, distance to centre, and the length of data queues. Then, we use the Cluster Splitting Process (CSP) algorithm and the Analytical Hierarchy Process (AHP) method in order to provide a new method to solve this problem. These four factors are examined in our proposed approach, and our method is compared with the Base station Controlled Dynamic Clustering Protocol (BCDCP) algorithm. The simulation results show the proposed method in improving the network lifetime has better performance than the base station controlled dynamic clustering protocol algorithm. In our proposed method, the energy reduction is almost 5% more than the BCDCP method, and the packet loss rate in our proposed method is almost 25% lower than in the BCDCP method.

scholarly journals Qualification of Cluster Header and Cluster Member in Wireless Sensor Networks

2019 ◽  
Vol 8 (2S6) ◽  
pp. 101-105
Keyword(s):  
Wireless Sensor Networks ◽  
Sensor Networks ◽  
Data Transmission ◽  
Sensor Node ◽  
Data Transfer ◽  
Cluster Head ◽  
Residual Energy ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Sink Node

Many researches have been proposed for efficiency of data transmission from sensor nodes to sink node for energy efficiency in wireless sensor networks. Among them, cluster-based methods have been preferred In this study, we used the angle formed with the sink node and the distance of the cluster members to calculate the probability of cluster head. Each sensor node sends measurement values to header candidates, and the header candidate node measures the probability value of the header with the value received from its candidate member nodes. To construct the cluster members, the data transfer direction is considered. We consider angle, distance, and direction as cluster header possibility value. Experimental results show that data transmission is proceeding in the direction of going to the sink node. We calculated and displayed the header possibility value of the neighbor nodes of the sensor node and confirmed the candidates of the cluster header for data transfer as the value. In this study, residual energy amount of each sensor node is not considered. In the next study, we calculate the value considering the residual energy amount of the node when measuring the header possibility value of the cluster.

scholarly journals Comparison of Residual Energy-Based Clustering Algorithms for Wireless Sensor Network

2012 ◽  
Vol 2012 ◽  
pp. 1-10 ◽  
Author(s):  
Asis Kumar Tripathy ◽  
Suchismita Chinara
Keyword(s):  
Wireless Sensor Network ◽  
Sensor Network ◽  
Network Architecture ◽  
Clustering Algorithm ◽  
Cluster Head ◽  
Residual Energy ◽  
Base Station ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Energy Awareness

Wireless sensor network swears an exceptional fine-grained interface between the virtual and physical worlds. The clustering algorithm is a kind of key technique used to reduce energy consumption. Many clustering, power management, and data dissemination protocols have been specifically designed for wireless sensor network (WSN) where energy awareness is an essential design issue. Each clustering algorithm is composed of three phases cluster head (CH) selection, the setup phase, and steady state phase. The hot point in these algorithms is the cluster head selection. The focus, however, has been given to the residual energy-based clustering protocols which might differ depending on the application and network architecture. In this paper, a survey of the state-of-the-art clustering techniques in WSNs has been compared to find the merits and demerits among themselves. It has been assumed that the sensor nodes are randomly distributed and are not mobile, the coordinates of the base station (BS) and the dimensions of the sensor field are known.

scholarly journals Two Level Intrusion Detection Mechanism For Context and Trust in Wireless Sensor Network

2020 ◽  
Vol 8 (6) ◽  
pp. 65-71
Keyword(s):  
Wireless Sensor Networks ◽  
Wireless Sensor Network ◽  
Sensor Networks ◽  
Intrusion Detection ◽  
Sensor Network ◽  
Cluster Head ◽  
Base Station ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Trust Evaluation

21st century is considered as the era of communication, and Wireless Sensor Networks (WSN) have assumed an extremely essential job in the correspondence period. A wireless sensor network is defined as a homogeneous or heterogeneous system contains a large number of sensors, namely called nodes used to monitor different environments in cooperatives. WSN is composed of sensor nodes (S.N.), base stations (B.S.), and cluster head (C.H.). The popularity of wireless sensor networks has been increased day by day exponentially because of its wide scope of utilizations. The applications of wireless sensor networks are air traffic control, healthcare systems, home services, military services, industrial & building automation, network communications, VAN, etc. Thus the wide range of applications attracts attackers. To secure from different types of attacks, mainly intruder, intrusion detection based on dynamic state context and hierarchical trust in WSNs (IDSHT) is proposed. The trust evaluation is carried out in hierarchical way. The trust of sensor nodes is evaluated by cluster head (C.H.), whereas the trust of the cluster head is evaluated by a neighbor cluster head or base station. Hence the content trust, honest trust, and interactive trust are put forward by combining direct evaluation and feedback based evaluation in the fixed hop range. In this way, the complexity of trust management is carried in a hierarchical manner, and trust evaluation overhead is minimized.

scholarly journals Cluster Head Relocation Based on Selfish Herd Hypothesis for Prolonging the Life Span of Wireless Sensor Networks

Electronics ◽  
2018 ◽  
Vol 7 (12) ◽  
pp. 403 ◽  
Author(s):  
Goran Popovic ◽  
Goran Djukanovic ◽  
Dimitris Kanellopoulos
Keyword(s):  
Wireless Sensor Networks ◽  
Sensor Networks ◽  
Network Lifetime ◽  
Network Performance ◽  
Cluster Head ◽  
Base Station ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Total Energy Consumption ◽  
Selfish Herd

Clustering achieves energy efficiency and scalable performance in wireless sensor networks (WSNs). A cluster is formed of several sensor nodes, one of them selected as the cluster head (CH). A CH collects information from the cluster members and sends aggregated data to the base station or another CH. In such a hierarchical WSN, some nodes are possibly moveable or nomadic (relocated periodically), while others are static. The mobility of sensor nodes can improve network performance and prolong network lifetime. This paper presents the idea of mobile, solar-powered CHs that relocate themselves inside clusters in such a way that the total energy consumption in the network is reduced and the network lifetime is extended. The positioning of CHs is made in each round based on a selfish herd hypothesis, where the leader retreats to the center of gravity. Based on this idea, the CH-active algorithm is proposed in this study. Simulation results show that this algorithm has benefits in terms of network lifetime and in the prolongation of the duration of network stability period.

Presenting the Hybrid Algorithm of Honeybee - Harmony in Clustering and Routing of Wireless Sensor Networks

2019 ◽  
Vol 9 (3) ◽  
pp. 357-371
Author(s):  
Mohammad Sedighimanesh ◽  
Hesam Zandhesami ◽  
Ali Sedighimanesh
Keyword(s):  
Wireless Sensor Networks ◽  
Energy Consumption ◽  
Wireless Sensor Network ◽  
Sensor Networks ◽  
Sensor Network ◽  
Network Lifetime ◽  
Cluster Head ◽  
Rechargeable Batteries ◽  
Base Station ◽  
Wireless Sensor

Background: Wireless sensor networks are considered as one of the 21st century's most important technologies. Sensors in wireless sensor networks usually have limited and sometimes non-rechargeable batteries, which they are supposed to be preserved for months or even years. That's why the energy consumption in these networks is of a great importance. Objective: One way to improve energy consumption in a wireless sensor network is to use clustering. In clustered networks, one node is known as the cluster head and other nodes as normal members, which normal nodes send the collected data to the cluster head, and the cluster head sends the information to the base station either by a single step or by multiple steps. Method: Using clustering simplifies resource management and increases scalability, reliability, and the network lifetime. Although the cluster formation involves a time- overhead and how to choose the cluster head is another problem, but its advantages are more than its disadvantages. : The primary aim of this study is to offer a solution to reduce energy consumption in the sensor network. In this study, during the selection of cluster heads, Honeybee Algorithm is used and also for routing, Harmonic Search Algorithm is used. In this paper, the simulation is performed by using MATLAB software and the proposed method is compared with the Low Energy Adaptive Clustering Hierarchy (LEACH) and the multi-objective fuzzy clustering algorithm (MOFCA). Result and Conclusion: By simulations of this study, we conclude that this research has remarkably increased the network lifetime with respect to EECS, LEACH, and MOFCA algorithms. In view of the energy constraints of the wireless sensor network and the non-rechargeable batteries in most cases, providing such solutions and using metaheuristic algorithms can result in a significant reduction in energy consumption and, consequently, increase in the network lifetime.

Enhanced Auxiliary Cluster Head Selection Routing Algorithm in Wireless Sensor Networks

2019 ◽  
Vol 12 ◽  
Author(s):  
Gaurav Kumar Nigam ◽  
Chetna Dabas
Keyword(s):  
Wireless Sensor Networks ◽  
Wireless Sensor Network ◽  
Sensor Networks ◽  
Sensor Network ◽  
Cluster Head ◽  
Base Station ◽  
Energy Utilization ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Cluster Head Selection

Background & Objective: Wireless sensor networks are made up of huge amount of less powered small sensor nodes that can audit the surroundings, collect meaningful data, and send it base station. Various energy management plans that pursue to lengthen the endurance of overall network has been proposed over the years, but energy conservation remains the major challenge as the sensor nodes have finite battery and low computational capabilities. Cluster based routing is the most fitting system to help for burden adjusting, adaptation to internal failure, and solid correspondence to draw out execution parameters of wireless sensor network. Low energy adaptive clustering hierarchy is an efficient clustering based hierarchical protocol that is used to enhance the lifetime of sensor nodes in wireless sensor network. It has some basic flaws that need to be overwhelmed in order to reduce the energy utilization and inflating the nodes lifetime. Methods : In this paper, an effective auxiliary cluster head selection is used to propose a new enhanced GC-LEACH algorithm in order to minimize the energy utilization and prolonged the lifespan of wireless sensor network. Results & Conclusion: Simulation is performed in NS-2 and the outcomes show that the GC-LEACH outperforms conventional LEACH and its existing versions in the context of frequent cluster head rotation in various rounds, number of data packets collected at base station, as well as reduces the energy consumption 14% - 19% and prolongs the system lifetime 8% - 15%.

Sign in / Sign up

Export Citation Format

Share Document