Removal of Pb(II), Zn(II), Sn(II) and Cu(II) Ions from Aqueous Solutions by Linear Alternating Poly(4,4'-biphenol oxalate) Oligomer

2020 ◽  
Vol 15 (2) ◽  
pp. 73-85
Keyword(s):  
Aqueous Solutions ◽  
Metal Ions ◽  
Metal Ion ◽  
Ph Value ◽  
Equilibrium Concentration ◽  
Ion Uptake ◽  
Uptake Capacity ◽  
Concentration Data ◽  
Hno3 Solution ◽  
Metal Ion Uptake

Poly(4,4′-biphenol oxalate) oligomer was synthesized and characterized by FT-IR, elemental analysis XRD and thermal analysis. The capability of the oligomer to take away Pb(II), Zn(II), Sn(II) and Cu(II) metal ions from aqueous solutions was considered by the known batch and column techniques in terms of concentration, pH value, contact time and temperature. The results indicated that a high initial rate of metal-ion uptake by the oligomer was observed throughout the first 30 minutes, which enlarged slightly amid rising the pH value and then reached its greatest value at pH=5.00 for Pb(II) and Zn(II), pH=4.00 for Cu(II) and pH=6.00 for Sn(II). The oligomer exhibited a high metal-ion uptake capacity to Pb(II) and Zn(II), but a little metal-ion uptake capacity to Cu(II) and Sn(II). Linearized forms of the Langmuir, Freundlich and Dubinin–Radushkevich adsorption isotherms were used to investigate the experimental equilibrium concentration data of Pb(II), Zn(II), Cu(II) and Sn(II). ΔG values demonstrated that the adsorption process of these metal ions on the oligomer is favored while the ΔH values indicated that this process is endothermic. On the other hand, the entropy of the process is positive. In addition to batch experiments, column experiments were performed, where the metal ions were efficiently recovered by treatment of the metal-loaded oligomer with 1.0 M HNO3, 1.0 M HCl and 0.5 M EDTA. The best results were obtained with 1.0 M HNO3 solution.

scholarly journals Comparison between Different Keratin-composed Biosorbents for the Removal of Heavy Metal Ions from Aqueous Solutions

2002 ◽  
Vol 20 (4) ◽  
pp. 393-416 ◽  
Author(s):  
Fawzi Banat ◽  
Sameer Al-Asheh ◽  
Dheaya‘ Al-Rousan
Keyword(s):  
Aqueous Solutions ◽  
Human Hair ◽  
Metal Ion ◽  
Ph Value ◽  
Freundlich Isotherm ◽  
Operating Conditions ◽  
Ion Uptake ◽  
Chicken Feathers ◽  
Initial Ph ◽  
Metal Ion Uptake

This study examined and compared the ability of chicken feathers, human hair and animal horns, as keratin-composed biosorbents, for the removal of Zn2+ and Cu2+ ions from single metal ion aqueous solutions under different operating conditions. The three biosorbents investigated in this study were all capable of adsorbing Zn2+ and Cu2+ ions from aqueous solutions. The biosorbent showing the highest uptake of Zn2+ and Cu2+ ions was animal horns. Chicken feathers showed a higher Cu2+ ion uptake and a lower Zn2+ ion compared to human hair. Increasing the initial concentration of Zn2+ or Cu2+ ions, or increasing the initial pH value, increased the metal ion uptake. Such uptake decreased when the temperature was raised from 25°C to 50°C for all adsorbent/metal ion combinations except for Zn2+ ion/human hair where the uptake increased with temperature. It was demonstrated that the addition of NaCl salt to the metal ion solution depressed the metal ion uptake. The Freundlich isotherm model was found to be applicable to the adsorption data for Cu2+ and Zn2+ ions.

Properties of the mammalian and yeast metal-ion transporters DCT1 and Smf1p expressed in Xenopus laevis oocytes

2001 ◽  
Vol 204 (6) ◽  
pp. 1053-1061 ◽  
Author(s):  
A. Sacher ◽  
A. Cohen ◽  
N. Nelson
Keyword(s):  
Xenopus Laevis ◽  
Metal Ions ◽  
Metal Ion ◽  
Divalent Cations ◽  
Ion Uptake ◽  
Xenopus Laevis Oocytes ◽  
Ion Transporters ◽  
Divalent Metal Ions ◽  
Transport Pathway ◽  
Metal Ion Uptake

Transition metals are essential for many metabolic processes, and their homeostasis is crucial for life. Metal-ion transporters play a major role in maintaining the correct concentrations of the various metal ions in living cells. Little is known about the transport mechanism of metal ions by eukaryotic cells. Some insight has been gained from studies of the mammalian transporter DCT1 and the yeast transporter Smf1p by following the uptake of various metal ions and from electrophysiological experiments using Xenopus laevis oocytes injected with RNA copies (c-RNA) of the genes for these transporters. Both transporters catalyze the proton-dependent uptake of divalent cations accompanied by a ‘slippage’ phenomenon of different monovalent cations unique to each transporter. Here, we further characterize the transport activity of DCT1 and Smf1p, their substrate specificity and their transport properties. We observed that Zn(2+) is not transported through the membrane of Xenopus laevis oocytes by either transporter, even though it inhibits the transport of the other metal ions and enables protons to ‘slip’ through the DCT1 transporter. A special construct (Smf1p-s) was made to enhance Smf1p activity in oocytes to enable electrophysiological studies of Smf1p-s-expressing cells. 54Mn(2+) uptake by Smf1p-s was measured at various holding potentials. In the absence of Na(+) and at pH 5.5, metal-ion uptake was not affected by changes in negative holding potentials. Elevating the pH of the medium to 6.5 caused metal-ion uptake to be influenced by the holding potential: ion uptake increased when the potential was lowered. Na(+) inhibited metal-ion uptake in accordance with the elevation of the holding potential. A novel clutch mechanism of ion slippage that operates via continuously variable stoichiometry between the driving-force pathway (H(+)) and the transport pathway (divalent metal ions) is proposed. The possible physiological advantages of proton slippage through DCT1 and of Na(+) slippage through Smf1p are discussed.

scholarly journals Adsorption properties of a nanostructured hybrid material containing aluminium towards some metal ions

2011 ◽  
Vol 9 (5) ◽  
pp. 932-940 ◽  
Author(s):  
Albena Detcheva ◽  
Paunka Vassileva ◽  
Ralitsa Georgieva ◽  
Dimitrinka Voykova ◽  
Tsvetelina Gerganova ◽  
...  
Keyword(s):  
Aqueous Solutions ◽  
Metal Ions ◽  
Hybrid Material ◽  
Metal Ion ◽  
Ph Value ◽  
Sol Gel ◽  
Transition Metal Ions ◽  
Adsorption Properties ◽  
Adsorption Of Nitrogen ◽  
Pseudo Second Order

AbstractIn the present work the adsorption of some transition metal ions from aqueous solutions on a silica-based nanostructured hybrid material modified by aluminium was investigated. The novel organic-inorganic material was synthesized via a sol-gel method through hydrolysis and co-condensation reactions. Its structure was characterized by means of SEM, XRD and FTIR. Based on the data obtained the most probable cross-linking mechanism for the derived xerogel was proposed. The characterization of its texture parameters was carried out by low-temperature adsorption of nitrogen. The adsorption properties of this material with respect to Cu(II), Cr(III) and Pb(II) ions from single-component aqueous solutions and multi-component aqueous solutions containing also Cd(II) and Fe(III) were evaluated. The effect of contact time, acidity of initial solutions and metal ion concentrations was investigated using the batch method. Pseudo-first order, pseudo-second order and intraparticle diffusion models were used to analyze kinetic data. In all cases the adsorption was significantly affected by the pH value. Equilibrium modelling data were fitted to linear Langmuir, Freundlich and Dubinin-Radushkevich models. Best fit was observed for Langmuir model, which showed determination coefficients greater than 0.992 for all ions studied. The maximum adsorption capacities for single- and multi-component adsorption were calculated.

scholarly journals Adsorption of Copper from aqueous solution by chitosan using molecular imprinting technology

2018 ◽  
Vol 3 (4) ◽  
pp. 141 ◽  
Author(s):  
Sepehr Azizkhani ◽  
Ebrahim Mahmoudi ◽  
Arefeh Emami ◽  
Siti Aslina Hussain ◽  
Abdul Wahab Mohammad
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Metal Ion ◽  
Copper Ions ◽  
Uptake Capacity ◽  
Copper Metal ◽  
Optimum Amount ◽  
Initial Concentration ◽  
Molecular Imprinting Technology ◽  
Metal Ion Uptake

In nature chitosan is a plentiful polymer with high heavy metal ion uptake capacity due to chitosan’s functional groups that chelate with the positive surfaces of heavy metal ions. In this study, epichlorohydrin was used as a crosslink to prepare the copper-imprinted chitosan as a pattern to enable the selectivity property and increase adsorption capacity. The effects of the cross-linker, PH, initial concentration and time were examined in this study to identify the optimum amount of each to remove copper metal ions from waste water by imprinted chitosan. This composite was characterized by Fourier-transform infrared spectroscopy (FTIR) test to determine the existence of copper ions in chitosan crosslinked with epichlorohydrin. Scanning electron microscopy (SEM) tests were also done to compare the surfaces of crosslinked chitosan and the removal of copper by imprinted chitosan. PH adsorption was tested from 3 to 7 and the initial concentration and time investigated were between 10 and 100 mg/l and 0 and 120 minutes respectively. The maximum capacity to adsorb was found to be at PH 7, initial concentration of 100mg/l at 90 minutes with 0.1 gr chitosan. Ultimately, the maximum adsorbent amount achieved for effective Cu(II) removal was 74.37 mg/g.

Use of agro-waste (Musa paradisiaca peels) as a sustainable biosorbent for toxic metal ions removal from contaminated water

2019 ◽  
Author(s):  
Chem Int
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Contact Time ◽  
Metal Ion ◽  
Equilibrium Concentration ◽  
Ion Concentration ◽  
Contaminated Water ◽  
Musa Paradisiaca ◽  
Percentage Removal ◽  
Adsorbent Dose

A study of removal of heavy metal ions from heavy metal contaminated water using agro-waste was carried out with Musa paradisiaca peels as test adsorbent. The study was carried by adding known quantities of lead (II) ions and cadmium (II) ions each and respectively into specific volume of water and adding specific dose of the test adsorbent into the heavy metal ion solution, and the mixture was agitated for a specific period of time and then the concentration of the metal ion remaining in the solution was determined with Perkin Elmer Atomic absorption spectrophotometer model 2380. The effect of contact time, initial adsorbate concentration, adsorbent dose, pH and temperature were considered. From the effect of contact time results equilibrium concentration was established at 60minutes. The percentage removal of these metal ions studied, were all above 90%. Adsorption and percentage removal of Pb2+ and Cd2+ from their aqueous solutions were affected by change in initial metal ion concentration, adsorbent dose pH and temperature. Adsorption isotherm studies confirmed the adsorption of the metal ions on the test adsorbent with good mathematical fits into Langmuir and Freundlich adsorption isotherms. Regression correlation (R2) values of the isotherm plots are all positive (>0.9), which suggests too, that the adsorption fitted into the isotherms considered.

Sign in / Sign up

Export Citation Format

Share Document