Critical Behavior of Electrical Conductivity for Reduced Graphene Oxide/Epoxy Resin Composites

2020 ◽  
Vol 13 (3) ◽  
pp. 181-190
Keyword(s):  
Electrical Conductivity ◽  
Graphene Oxide ◽  
Epoxy Resin ◽  
Temperature Coefficient ◽  
Reduced Graphene Oxide ◽  
Critical Behavior ◽  
Resin Matrix ◽  
Positive Temperature ◽  
Dc Electrical Conductivity ◽  
Reduced Graphene

Abstract: In this paper, we analyze the dc and ac electrical conductivities, in the 240 to 400 K temperature range and 102 to 106 Hz frequency range, of a percolating system synthesized by mixing reduced graphene oxide (rGO) particles in insulating epoxy resin matrix, diglycidyl ether of bisphenol A (DGEBA). We found that the dc electrical conductivity of the samples is strongly related to the rGO content, indicating a percolating behavior with percolation threshold ≈ 4 %. The critical behavior of the dc electrical conductivity as a function of the temperature indicates a strong positive temperature coefficient and a negative temperature coefficient of resistivity below and above the transition temperature Tg, respectively. Moreover, the results showed that the dc conductivity obeys the Arrhenius law and the ac electrical conductivity is both frequency and temperature dependent and follows the Jonscher’s power law. Keywords: Composites, Dielectric properties, Fillers, Glass transition, Graphene.

Electrical Property of Anchored Chitosan/Silver on Reduced Graphene Oxide Aerogel

2018 ◽  
Vol 24 (8) ◽  
pp. 5552-5555
Author(s):  
G. Vanitha Kumari ◽  
S Asha ◽  
A. Nimrodh Ananth ◽  
M. A. Jothi Rajan ◽  
T Mathavan
Keyword(s):  
Electrical Conductivity ◽  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Noncovalent Interaction ◽  
Silver Particles ◽  
Dc Electrical Conductivity ◽  
Fourier Transformed Infrared Spectroscopy ◽  
Reduced Graphene ◽  
Reduced Graphene Oxide Aerogel ◽  
Graphene Oxide Aerogel

Silver (Ag)/chitosan (CHT) functionalized Reduced graphene oxide aerogel was fabricated. CHT/Ag decorated reduced graphene oxide aerogel (RGOA) was characterized using XRD, Raman spectroscopy, Fourier transformed infrared spectroscopy. Scanning electron microscopy were explaining the surface morphology of CHT/Ag/RGOA. Physical techniques such as, spectroscopy and microscopy spectrum confirms the noncovalent interaction between graphene oxide layers and also the electrostatic interaction between Ag and CHT, RGOA. Electrostatically interacted Ag and CHT could enhance the properties of RGOA. The DC electrical conductivity of the CHT/Ag wrapped RGOA investigated from I–V characteristics using keithly source meter. Thus, results indicate CHT/Ag/RGOA has enhanced electrical conductivity due to the influence of interacted silver particles.

scholarly journals Graphene Oxide: A Smart (Starting) Material for Natural Methylxanthines Adsorption and Detection

Molecules ◽  
2019 ◽  
Vol 24 (23) ◽  
pp. 4247 ◽  
Author(s):  
Rita Petrucci ◽  
Isabella Chiarotto ◽  
Leonardo Mattiello ◽  
Daniele Passeri ◽  
Marco Rossi ◽  
...  
Keyword(s):  
Electrical Conductivity ◽  
Graphene Oxide ◽  
Nucleic Acids ◽  
Reduced Graphene Oxide ◽  
Electrochemical Sensors ◽  
Enzymatic Digestion ◽  
Biologically Active ◽  
Polar Solvents ◽  
Dna And Rna ◽  
Reduced Graphene

Natural methylxanthines, caffeine, theophylline and theobromine, are widespread biologically active alkaloids in human nutrition, found mainly in beverages (coffee, tea, cocoa, energy drinks, etc.). Their detection is thus of extreme importance, and many studies are devoted to this topic. During the last decade, graphene oxide (GO) and reduced graphene oxide (RGO) gained popularity as constituents of sensors (chemical, electrochemical and biosensors) for methylxanthines. The main advantages of GO and RGO with respect to graphene are the easiness and cheapness of synthesis, the notable higher solubility in polar solvents (water, among others), and the higher reactivity towards these targets (mainly due to – interactions); one of the main disadvantages is the lower electrical conductivity, especially when using them in electrochemical sensors. Nonetheless, their use in sensors is becoming more and more common, with the obtainment of very good results in terms of selectivity and sensitivity (up to 5.4 × 10−10 mol L−1 and 1.8 × 10−9 mol L−1 for caffeine and theophylline, respectively). Moreover, the ability of GO to protect DNA and RNA from enzymatic digestion renders it one of the best candidates for biosensors based on these nucleic acids. This is an up-to-date review of the use of GO and RGO in sensors.

Chemically reduced graphene oxide-coated knitted fabric imparted conductivity and outstanding hydrophobicity

2021 ◽  
pp. 004051752199547
Author(s):  
Min Hou ◽  
Xinghua Hong ◽  
Yanjun Tang ◽  
Zimin Jin ◽  
Chengyan Zhu ◽  
...  
Keyword(s):  
Electrical Conductivity ◽  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Chemical Reduction ◽  
Knitted Fabric ◽  
Mesh Structure ◽  
Reduced Graphene ◽  
Chemically Reduced Graphene Oxide ◽  
Modified Hummers Method

Functionalized knitted fabric, as a kind of flexible, wearable, and waterproof material capable of conductivity, sensitivity and outstanding hydrophobicity, is valuable for multi-field applications. Herein, the reduced graphene oxide (RGO)-coated knitted fabric (polyester/spandex blended) is prepared, which involves the use of graphite oxide (GO) by modified Hummers method and in-situ chemical reduction with hydrazine hydrate. The treated fabric exhibits a high electrical conductivity (202.09 S/cm) and an outstanding hydrophobicity (140°). The outstanding hydrophobicity is associated with the morphology of the fabric and fiber with reference to pseudo-infiltration. These properties can withstand repeated bending and washing without serious deterioration, maintaining good electrical conductivity (35.70 S/cm) and contact angle (119.39°) after eight standard washing cycles. The material, which has RGO architecture and continuous loop mesh structure, can find wide use in smart garment applications.

scholarly journals Superparamagnetic ZnFe2O4 Nanoparticles-Reduced Graphene Oxide-Polyurethane Resin Based Nanocomposites for Electromagnetic Interference Shielding Application

Nanomaterials ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 1112
Author(s):  
Raghvendra Singh Yadav ◽  
Anju ◽  
Thaiskang Jamatia ◽  
Ivo Kuřitka ◽  
Jarmila Vilčáková ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Electromagnetic Waves ◽  
Spinel Ferrite ◽  
Ferrite Nanoparticles ◽  
Resin Matrix ◽  
Polyurethane Resin ◽  
Reduced Graphene ◽  
Znfe2o4 Nanoparticles ◽  
Electromagnetic Pollution

Superparamagnetic ZnFe2O4 spinel ferrite nanoparticles were prepared by the sonochemical synthesis method at different ultra-sonication times of 25 min (ZS25), 50 min (ZS50), and 100 min (ZS100). The structural properties of ZnFe2O4 spinel ferrite nanoparticles were controlled via sonochemical synthesis time. The average crystallite size increases from 3.0 nm to 4.0 nm with a rise of sonication time from 25 min to 100 min. The change of physical properties of ZnFe2O4 nanoparticles with the increase of sonication time was observed. The prepared ZnFe2O4 nanoparticles show superparamagnetic behavior. The prepared ZnFe2O4 nanoparticles (ZS25, ZS50, and ZS100) and reduced graphene oxide (RGO) were embedded in a polyurethane resin (PUR) matrix as a shield against electromagnetic pollution. The ultra-sonication method has been used for the preparation of nanocomposites. The total shielding effectiveness (SET) value for the prepared nanocomposites was studied at a thickness of 1 mm in the range of 8.2–12.4 GHz. The high attenuation constant (α) value of the prepared ZS100-RGO-PUR nanocomposite as compared with other samples recommended high absorption of electromagnetic waves. The existence of electric-magnetic nanofillers in the resin matrix delivered the inclusive acts of magnetic loss, dielectric loss, appropriate attenuation constant, and effective impedance matching. The synergistic effect of ZnFe2O4 and RGO in the PUR matrix led to high interfacial polarization and, consequently, significant absorption of the electromagnetic waves. The outcomes and methods also assure an inventive and competent approach to develop lightweight and flexible polyurethane resin matrix-based nanocomposites, consisting of superparamagnetic zinc ferrite nanoparticles and reduced graphene oxide as a shield against electromagnetic pollution.

Study of Electrical Conductivity of Pyrrole-Reduced Graphene Oxide Pellet

2021 ◽  
Author(s):  
Sara Maira Mohd Hizam ◽  
Nurul Izza Soaid ◽  
Mohamed Shuaib Mohamed Saheed ◽  
Norani Muti Mohamed ◽  
Chong Fai Kait
Keyword(s):  
Electrical Conductivity ◽  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Reduced Graphene

scholarly journals Chemical and Temperature Sensors Based on Functionalized Reduced Graphene Oxide

Chemosensors ◽  
2020 ◽  
Vol 8 (2) ◽  
pp. 43
Author(s):  
Esteban Araya-Hermosilla ◽  
Matteo Minichino ◽  
Virgilio Mattoli ◽  
Andrea Pucci
Keyword(s):  
Graphene Oxide ◽  
Temperature Coefficient ◽  
Reduced Graphene Oxide ◽  
Electrical Transport ◽  
Structural Characteristics ◽  
Solid Dispersions ◽  
Negative Temperature ◽  
Resistance Variation ◽  
Reduced Graphene ◽  
Electrical Resistance Variation

In this work, we investigated the functionalization of reduced graphene oxide (rGO) with 2-(dodecen-1-yl) succinic anhydride (TPSA) to increase the rGO effective interactions with organic solvents both in liquid and vapor phases. Thermogravimetric analysis, STEM, XPS, FTIR-ATR, and Raman spectroscopy confirmed the effective functionalization of rGO with about the 30 wt% of grafted TPSA without affecting the structural characteristics of graphene but successfully enhancing its dispersibility in the selected solvent except for the apolar hexane. Solid TPSA-rGO dispersions displayed a reproducible semiconducting (activated) electrical transport with decreased resistance when heated from 20 °C to 60 °C and with a negative temperature coefficient of 10−3 K−1, i.e., comparable in absolute value with temperature coefficient in metals. It is worth noting that the same solid dispersions showed electrical resistance variation upon exposure to vapors with a detection limit in the order of 10 ppm and sensitivity α of about 10−4 ppm−1.

scholarly journals Effect of Doping Temperatures and Nitrogen Precursors on the Physicochemical, Optical, and Electrical Conductivity Properties of Nitrogen-Doped Reduced Graphene Oxide

Materials ◽  
2019 ◽  
Vol 12 (20) ◽  
pp. 3376 ◽  
Author(s):  
Nonjabulo P. D. Ngidi ◽  
Moses A. Ollengo ◽  
Vincent O. Nyamori
Keyword(s):  
Electrical Conductivity ◽  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Surface Area ◽  
Energy Storage Devices ◽  
Storage Devices ◽  
Nitrogen Doped ◽  
Substitutional Doping ◽  
Reduced Graphene ◽  
Effect Of Doping

The greatest challenge in graphene-based material synthesis is achieving large surface area of high conductivity. Thus, tuning physico-electrochemical properties of these materials is of paramount importance. An even greater problem is to obtain a desired dopant configuration which allows control over device sensitivity and enhanced reproducibility. In this work, substitutional doping of graphene oxide (GO) with nitrogen atoms to induce lattice–structural modification of GO resulted in nitrogen-doped reduced graphene oxide (N-rGO). The effect of doping temperatures and various nitrogen precursors on the physicochemical, optical, and conductivity properties of N-rGO is hereby reported. This was achieved by thermal treating GO with different nitrogen precursors at various doping temperatures. The lowest doping temperature (600 °C) resulted in less thermally stable N-rGO, yet with higher porosity, while the highest doping temperature (800 °C) produced the opposite results. The choice of nitrogen precursors had a significant impact on the atomic percentage of nitrogen in N-rGO. Nitrogen-rich precursor, 4-nitro-ο-phenylenediamine, provided N-rGO with favorable physicochemical properties (larger surface area of 154.02 m2 g−1) with an enhanced electrical conductivity (0.133 S cm−1) property, making it more useful in energy storage devices. Thus, by adjusting the doping temperatures and nitrogen precursors, one can tailor various properties of N-rGO.

The Effect of Reduced Graphene Oxide (rGO) Coating on Electrical Conductivity of Lithium Ferro Phosphate (LFP) as an Alternative Cathode for Li-Ion Battery

2019 ◽  
Vol 966 ◽  
pp. 386-391
Author(s):  
Eka Suarso ◽  
Anna Zakiyatul Laila ◽  
Firsta Agung Setyawan ◽  
Mochamad Zainuri ◽  
Zaenal Arifin ◽  
...  
Keyword(s):  
Electrical Conductivity ◽  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Sol Gel ◽  
Xrd Analysis ◽  
Mass Ratio ◽  
Good Crystallinity ◽  
Reduced Graphene ◽  
Phosphate Source

In this study an investigation has been conducted on the effect of reduced graphene oxide (rGO) coating on increasing the value of Lithium Ferro Phosphate (LFP) electrical conductivity. This coating process uses a variation of the mass ratio of LiFePO4/rGO by 90%:10%, 70%:20%, and 67%:33%. The LiFePO4 precursor was prepared using the sol-gel rute from the main commercial materials, namely Li2CO3 powder as a source of lithium ions, FeCl2.4H2O as a source of iron and NH4H2PO4 powder as a phosphate source. As for the coating used rGO extracted from coconut shell waste. The samples were calcined with temperature variations of 600°C, 650°C and 700°C in an argon environment for 10 hour. The phase purity and crystal structure of LiFePO4 were analyzed using XRD. The analysis of data from XRD was done using the the Match!, Rietica, and MAUD software. Based on the results of XRD analysis, LiFePO4 with high purity and good crystallinity was obtained when the sample was calcined at temperature of 700°C. The results of the MAUD analysis show that the best size of LiFePO4 crystal is 86,54 nm. LiFePO4/rGO nanocomposite was successfully synthesized by mechanical ultracentrifugation method. The characterization of the value of electrical conductivity, carried out using a four-point probe. The results show that the greater the percentage of rGO, the higher the value of electrical conductivity. The mass ratio of 67% LiFePO4 and 33% rGO shows an increment in good conductivity values, from the original order of 10-8 S/cm to the order of 10-4 S/cm.

Sign in / Sign up

Export Citation Format

Share Document