scholarly journals Remote Viewing with and without controlled Out-Of-Body Consciousness

2020 ◽  
Author(s):  
Arianna Ballati ◽  
Elena Prati ◽  
Luciano Pederzoli ◽  
Patrizio Tressoldi
Keyword(s):  
Lower Percentage ◽  
Accurate Information ◽  
Body Consciousness ◽  
Average Percentage ◽  
Body State ◽  
Hypnotic Induction ◽  
Remote Viewing

Four participants, chosen for their experience in reaching an Out-of-Body state of consciousness via hypnotic induction, were asked to describe five different and unknown locations, at first using Remote Viewing conditions in an ordinary state of consciousness and then again using Remote Viewing in Out-of-Body state of consciousness. According to an assessment by two independent judges, the average percentages of information obtained in Remote Viewing were 55% for those correct and 35% for those wrong, while in Out-of-Body they were 54% and 35% respectively. The average percentage of identical information to both conditions was 14%. Furthermore, three out of four participants obtained a higher percentage of correct answers and a lower percentage of incorrect answers in the OB-RV condition. This study illustrates the possibility of also using Remote Viewing in an Out-of-Body state of consciousness that is induced and controlled via hypnosis to obtain accurate information about unknown locations in an unconventional way.

scholarly journals Remote Viewing with and without controlled Out-Of-Body Consciousness

2020 ◽  
Author(s):  
Luciano Pederzoli ◽  
Elena Prati ◽  
Arianna Ballati ◽  
Patrizio Tressoldi
Keyword(s):  
Lower Percentage ◽  
Accurate Information ◽  
Body Consciousness ◽  
Average Percentage ◽  
Body State ◽  
Hypnotic Induction ◽  
Remote Viewing

Four participants, chosen for their experience in reaching an Out-of-Body state of consciousness via hypnotic induction, were asked to describe five different and unknown locations, at first using Remote Viewing conditions in an ordinary state of consciousness and then again using Remote Viewing in Out-of-Body state of consciousness. According to an assessment by two independent judges, the average percentages of information obtained in Remote Viewing were 55% for those correct and 35% for those wrong, while in Out-of-Body they were 54% and 35% respectively. The average percentage of identical information to both conditions was 14%. Furthermore, three out of four participants obtained a higher percentage of correct answers and a lower percentage of incorrect answers in the OB-RV condition.This study illustrates the possibility of also using Remote Viewing in an Out-of-Body state of consciousness that is induced and controlled via hypnosis to obtain accurate information about unknown locations in an unconventional way.

Use of Lean Management to Increase Efficiency and Osteopathic Manipulative Treatment in a Family Medicine Residency

2021 ◽  
pp. 10-15
Author(s):  
Andrew Eilerman ◽  
Ryan Jay ◽  
Chelsey Smith ◽  
Charles Fisher ◽  
Jill Porter ◽  
...  
Keyword(s):  
Family Medicine ◽  
Performance Indicator ◽  
Wait Time ◽  
Lower Percentage ◽  
Wait Times ◽  
P Value ◽  
Osteopathic Manipulative Treatment ◽  
Lean Management ◽  
Average Percentage ◽  
Family Medicine Residency

Objectives: To determine Lean management's ability to improve the efficiency of residents and increase osteopathic manipulative treatment (OMT) in a family medicine residency clinic. Methods: A Key Performance Indicator Board (KPI), a process of Lean management, was created in a residency clinic by various staff. Patient wait times were chosen for the quality measure and daily huddles took place to track progress. A “5-why” was conducted to determine the reasons for failure to meet goals. Faculty used this information to create the 5 “S” of Efficiency method to help residents improve timeliness in caring for complicated patients. Comparisons of the number of patient visits failing wait time goals and total OMT performed before and after the intervention was analyzed. Chi-square was used for statistical analysis and the p-value was set at 0.05. Results: Implementation of the 5 “S” of Efficiency method resulted in a significantly lower percentage of days failing the wait time goal in comparison to months before the intervention (p = 0.00001): the average percentage of failed days decreased from 43.1% to 10.4% with the intervention. Enacting Lean management also resulted in a significantly greater percentage of billed OMT billing codes (6.8% vs. 5.3%) (p = 0.03). Conclusion: This study indicates that the use of Lean may reduce patient wait times and lead to increased OMT use among family medicine residents. Use of Lean or the 5 “S” of Efficiency method may help other osteopathic programs attempting to improve care; however, further research is indicated.

scholarly journals The Impact of COVID-19 on Adolescents with Eating Disorders: A Cohort Study

2021 ◽  
Author(s):  
Wendy Spettigue ◽  
Nicole Obeid ◽  
Madison Erbach ◽  
Stephen Feder ◽  
Natalie Finner ◽  
...  
Keyword(s):  
Eating Disorders ◽  
Chart Review ◽  
Tertiary Care ◽  
Retrospective Chart Review ◽  
Time Frame ◽  
Lower Percentage ◽  
Average Percentage ◽  
Psychological Measures ◽  
One Year ◽  
The Impact

Abstract Background: There is a noticeable lack of evidence regarding the impact of COVID-19 and the associated lockdown on young people with eating disorders. The goals of this study were 1) to examine characteristics of adolescents presenting for eating disorder (ED) assessment since the onset of the COVID-19 pandemic; 2) to compare adolescents presenting for ED assessment since the onset of the COVID-19 pandemic to those that presented for assessment one year previously; 3) to examine implications of the pandemic on the system of care. Methods: A retrospective chart review was completed on all patients assessed at a pediatric tertiary care ED program during the pandemic between April 1 and October 31, 2020, and on youth assessed during the same time frame one year previously. Data including body measurements and results of psychological measures was extracted from patients’ charts. Clinician reports were utilized for accounts of ED symptoms. Referrals to our program were also compared for the two time periods.Results: Of the 48 youth assessed between April and October 2020, average age was 14.6 years and average percentage of treatment goal weight was 77.7%. 40% cited the pandemic as a trigger for their ED; of these youth, 78.9% were medically unstable compared to 55.2% of those whose ED was not triggered by the pandemic. When comparing the 2020 cohort to those assessed in 2019, youth who presented for assessment during the pandemic trended towards having lower percentage of goal weights and higher rates of self-reported impairment, and were significantly more likely to be medically unstable and to require hospitalization. Higher rates of inpatient admissions, emergency room consultation requests and outpatient referrals deemed “urgent” were likewise associated with the pandemic period.

scholarly journals Ecotoxicological Tests of Metal-Contaminated soils

2021 ◽  
Vol 906 (1) ◽  
pp. 012099
Author(s):  
Ol’ga Šestinová ◽  
Lenka Findoráková ◽  
Jozef HančuFák ◽  
Zuzana Szabová
Keyword(s):  
Heavy Metals ◽  
Growth Inhibition ◽  
Contaminated Soils ◽  
Agricultural Soils ◽  
Steel Production ◽  
Sinapis Alba ◽  
Steel Plant ◽  
Lower Percentage ◽  
Average Percentage ◽  
Agricultural Areas

Abstract The raw steel production plays a key role in the economic development of Slovakia. Unfortunately, the technology of steel production, agricultural and industrial activities contribute to contamination of the soil in the region Eastern Slovakia. The purpose of this study was to investigate the effect of heavy metals in urban soils from the Košice area, using bioassays on earthworms and phytotoxicity. An earthworm avoidance test has potential advantages for use in evaluation of hazardous soils sites and proved as a quick approach to determining the presence of contaminants. The earthworm (Dendrobaena veneta) takes up and retains metals from soil containing of heavy metals. Assessment of soil phytotoxicity was based on germination and seedling growth of the terrestrial plant (mustard Sinapis alba). The level of Cr, Co, Cd and Hg were assessed in 8 industrial soils (4 agricultural areas and 4 grass-plot areas) from the area U.S. Steel Košice. The highest levels contaminations of chromium (278mg/kg), cobalt (39mg/kg), cadmium (21mg/kg) and mercury (0.80mg/kg) were determined for the grass-plot soils (main gate of the U. S. Steel-plant). Phytotoxkit results for the agricultural soils from around Košice showed that, the potential toxicity values are lowly, represented by a lower percentage of inhibition in germination range between 5 and 33 % and the average percentage of growth inhibition was 12-39 % for Sinapis alba. The results for the grass-plot areas soils from around Košice showed the percentage of inhibition in germination range between 13 and 47 % and the average percentage of growth inhibition was 19-49 % for Sinapis alba. Low mortality effects were recorded in the tests with Dendronaena veneta. The distribution of the worms found in the double control was within the range 10–100 % for all areas of the agricultural soils and grass-plot soils, for after 48h. The significant (P<0.05) avoidance by Dendronaena veneta were 100% in soils of areas Gomboš and from main gate of the U. S. Steel-plant, Košice. The above results reflect that not only may the worms be able to detect metals, but in fact they may also change their behavioural response over time.

scholarly journals The impact of COVID-19 on adolescents with eating disorders: a cohort study

2021 ◽  
Vol 9 (1) ◽  
Author(s):  
Wendy Spettigue ◽  
Nicole Obeid ◽  
Madison Erbach ◽  
Stephen Feder ◽  
Natalie Finner ◽  
...  
Keyword(s):  
Eating Disorders ◽  
Chart Review ◽  
Clinical Course ◽  
Tertiary Care ◽  
Retrospective Chart Review ◽  
Time Frame ◽  
Lower Percentage ◽  
Average Percentage ◽  
Psychological Measures ◽  
The Impact

Abstract Background There is a noticeable lack of evidence regarding the impact of COVID-19 and the associated lockdown on young people with eating disorders. The goals of this study were 1) to examine characteristics of adolescents presenting for eating disorder (ED) assessment since the onset of the COVID-19 pandemic; 2) to compare adolescents presenting for ED assessment since the onset of the COVID-19 pandemic to those that presented for assessment 1 year previously; 3) to examine implications of the pandemic on the system of care. Methods A retrospective chart review was completed on all patients assessed at a pediatric tertiary care ED program during the pandemic between April 1 and October 31, 2020, and on youth assessed during the same time frame 1 year previously. Data including body measurements and results of psychological measures was extracted from patients’ charts. Clinician reports were utilized for accounts of ED symptoms. Referrals to our program were also compared for the two time periods. Results Of the 48 youth assessed between April and October 2020, average age was 14.6 years and average percentage of treatment goal weight was 77.7%. 40% cited the pandemic as a trigger for their ED; of these youth, 78.9% were medically unstable compared to 55.2% of those whose ED was not triggered by the pandemic. When comparing the 2020 cohort to those assessed in 2019, youth who presented for assessment during the pandemic trended towards having lower percentage of goal weights and higher rates of self-reported impairment, and were significantly more likely to be medically unstable (p = 0.005) and to require hospitalization (p = 0.005). Higher rates of inpatient admissions, emergency room consultation requests and outpatient referrals deemed “urgent” were likewise associated with the pandemic period. Conclusions During the COVID-19 pandemic, youth assessed for an ED presented with high rates of medical instability and need for hospitalization. Caring for these youth may be more challenging during the pandemic, when access to services may be limited. Further research is required to better understand the impact of the pandemic on the clinical course and outcomes of EDs in adolescents.

Modification of the Electron Microscope for Investigation of Fully Hydrated Biological Specimens

1969 ◽  
Vol 27 ◽  
pp. 418-419 ◽  
Author(s):  
R. C. Moretz ◽  
D. F. Parsons
Keyword(s):  
Electron Beam ◽  
Electron Microscope ◽  
Structural Damage ◽  
Lower Percentage ◽  
Vacuum Drying ◽  
Total Removal ◽  
Total Absence ◽  
Biological Studies ◽  
Electron Microscopes ◽  
Beam Damage

Short lifetime or total absence of electron diffraction of ordered biological specimens is an indication that the specimen undergoes extensive molecular structural damage in the electron microscope. The specimen damage is due to the interaction of the electron beam (40-100 kV) with the specimen and the total removal of water from the structure by vacuum drying. The lower percentage of inelastic scattering at 1 MeV makes it possible to minimize the beam damage to the specimen. The elimination of vacuum drying by modification of the electron microscope is expected to allow more meaningful investigations of biological specimens at 100 kV until 1 MeV electron microscopes become more readily available. One modification, two-film microchambers, has been explored for both biological and non-biological studies.

Stopping-power determination for compound by EELS

1994 ◽  
Vol 52 ◽  
pp. 948-949 ◽  
Author(s):  
David C. Joy ◽  
Suichu Luo ◽  
John R. Dunlap ◽  
Dick Williams ◽  
Siqi Cao
Keyword(s):  
Energy Loss ◽  
Electron Energy ◽  
Electron Energy Loss Spectroscopy ◽  
Materials Science ◽  
Average Energy ◽  
Stopping Power ◽  
Accurate Information ◽  
Power Calculation ◽  
Coulomb Collisions ◽  
Electron Energy Loss

In Physics, Chemistry, Materials Science, Biology and Medicine, it is very important to have accurate information about the stopping power of various media for electrons, that is the average energy loss per unit pathlength due to inelastic Coulomb collisions with atomic electrons of the specimen along their trajectories. Techniques such as photoemission spectroscopy, Auger electron spectroscopy, and electron energy loss spectroscopy have been used in the measurements of electron-solid interaction. In this paper we present a comprehensive technique which combines experimental and theoretical work to determine the electron stopping power for various materials by electron energy loss spectroscopy (EELS ). As an example, we measured stopping power for Si, C, and their compound SiC. The method, results and discussion are described briefly as below.The stopping power calculation is based on the modified Bethe formula at low energy:where Neff and Ieff are the effective values of the mean ionization potential, and the number of electrons participating in the process respectively. Neff and Ieff can be obtained from the sum rule relations as we discussed before3 using the energy loss function Im(−1/ε).

Applications of SEM/EDXA in cement clinker investigation

1990 ◽  
Vol 48 (4) ◽  
pp. 870-871
Author(s):  
Arezki Tagnit-Hamou ◽  
Shondeep L. Sarkar
Keyword(s):  
Mineralogical Composition ◽  
Physicochemical Characteristics ◽  
Cement Clinker ◽  
Accurate Information ◽  
Phase Identification ◽  
History Of ◽  
Bulk Chemical ◽  
Resolution Imaging ◽  
Proven Method ◽  
Instantaneous Chemical

All the desired properties of cement primarily depend on the physicochemical characteristics of clinker from which the cement is produced. The mineralogical composition of the clinker forms the most important parameter influencing these properties.Optical microscopy provides reasonably accurate information pertaining to the thermal history of the clinker, while XRDA still remains the proven method of phase identification, and bulk chemical composition of the clinker can be readily obtained from XRFA. Nevertheless, all these microanalytical techniques are somewhat limited in their applications, and SEM/EDXA combination fills this gap uniquely by virtue of its high resolution imaging capability and possibility of instantaneous chemical analysis of individual phases.Inhomogeneities and impurities in the raw meal, influence of kiln conditions such as sintering and cooling rate being directly related to the microstructure can be effectively determined by SEM/EDXA. In addition, several physical characteristics of cement, such as rhcology, grindability and hydraulicity also depend on the clinker microstructure.

Burnout of the Mind – Burnout of the Body?

2018 ◽  
Vol 32 (1) ◽  
pp. 30-42 ◽  
Author(s):  
Claudia Traunmüller ◽  
Kerstin Gaisbachgrabner ◽  
Helmut Karl Lackner ◽  
Andreas R. Schwerdtfeger
Keyword(s):  
Blood Pressure ◽  
Allostatic Load ◽  
Maslach Burnout Inventory ◽  
The Body ◽  
Lower Percentage ◽  
Control Group ◽  
Urinary Catecholamines ◽  
Morning Cortisol ◽  
The Mind ◽  
Cortisol Increase

Abstract. In the present paper we investigate whether patients with a clinical diagnosis of burnout show physiological signs of burden across multiple physiological systems referred to as allostatic load (AL). Measures of the sympathetic-adrenergic-medullary (SAM) axis and the hypothalamic-pituitary-adrenal (HPA) axis were assessed. We examined patients who had been diagnosed with burnout by their physicians (n = 32) and were also identified as burnout patients based on their score in the Maslach Burnout Inventory-General Survey (MBI-GS) and compared them with a nonclinical control group (n = 19) with regard to indicators of allostatic load (i.e., ambulatory ECG, nocturnal urinary catecholamines, salivary morning cortisol secretion, blood pressure, and waist-to-hip ratio [WHR]). Contrary to expectations, a higher AL index suggesting elevated load in several of the parameters of the HPA and SAM axes was found in the control group but not in the burnout group. The control group showed higher norepinephrine values, higher blood pressure, higher WHR, higher sympathovagal balance, and lower percentage of cortisol increase within the first hour after awakening as compared to the patient group. Burnout was not associated with AL. Results seem to indicate a discrepancy between self-reported burnout symptoms and psychobiological load.

Investigating the Multimodal Nature of Human Communication

2009 ◽  
Vol 23 (2) ◽  
pp. 63-76 ◽  
Author(s):  
Silke Paulmann ◽  
Sarah Jessen ◽  
Sonja A. Kotz
Keyword(s):  
Visual Information ◽  
Empirical Studies ◽  
Physical Property ◽  
Event Related Potentials ◽  
Accurate Information ◽  
Human Communication ◽  
Channel Condition ◽  
Prosodic Cues ◽  
Early Processing ◽  
Related Potentials

The multimodal nature of human communication has been well established. Yet few empirical studies have systematically examined the widely held belief that this form of perception is facilitated in comparison to unimodal or bimodal perception. In the current experiment we first explored the processing of unimodally presented facial expressions. Furthermore, auditory (prosodic and/or lexical-semantic) information was presented together with the visual information to investigate the processing of bimodal (facial and prosodic cues) and multimodal (facial, lexic, and prosodic cues) human communication. Participants engaged in an identity identification task, while event-related potentials (ERPs) were being recorded to examine early processing mechanisms as reflected in the P200 and N300 component. While the former component has repeatedly been linked to physical property stimulus processing, the latter has been linked to more evaluative “meaning-related” processing. A direct relationship between P200 and N300 amplitude and the number of information channels present was found. The multimodal-channel condition elicited the smallest amplitude in the P200 and N300 components, followed by an increased amplitude in each component for the bimodal-channel condition. The largest amplitude was observed for the unimodal condition. These data suggest that multimodal information induces clear facilitation in comparison to unimodal or bimodal information. The advantage of multimodal perception as reflected in the P200 and N300 components may thus reflect one of the mechanisms allowing for fast and accurate information processing in human communication.

Sign in / Sign up

Export Citation Format

Share Document