scholarly journals Three-dimensional double-network hydrogels of graphene oxide, alginate, and polyacrylonitrile for copper removal from aqueous solution

2019 ◽  
Vol 25 (6) ◽  
pp. 924-929 ◽  
Author(s):  
Jung-Weon Choi ◽  
Hee Jin Kim ◽  
Hayeon Ryu ◽  
Sanghwa Oh ◽  
Sang-June Choi
Keyword(s):  
Graphene Oxide ◽  
Adsorption Capacity ◽  
Adsorption Equilibrium ◽  
Three Dimensional ◽  
Maximum Adsorption Capacity ◽  
Order Model ◽  
Double Network ◽  
Adsorption Sites ◽  
Pseudo Second Order ◽  
Ft Ir

Three-dimensional (3D) double-network graphene oxide/alginate-polyacrylonitrile (GO/Ca-Alg2-PAN) composite hydrogels were synthesized via surface functionalization of GO to activate adsorption sites. The morphology and structure of the GO/Ca-Alg2-PAN were analyzed by scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET), Fourier transform infrared spectroscopy (FT-IR), and thermogravimetric analysis (TGA-DSC). The results of the physicochemical analyses indicated that GO/Ca-Alg2-PAN was successfully synthesized by the combination of a 2D-structured graphene oxide with the alginate which was functionalized with the PAN polymer to generate the 3D double network composites. This functionalization approach contributed to an increase in Cu<sup>2+</sup> ion adsorption capacity. The maximum adsorption capacity of the GO/Ca-Alg2-PAN for Cu<sup>2+</sup> was 5.99 mmol/g. The results of adsorption kinetic experiments indicated that the GO/Ca-Alg2-PAN reached adsorption equilibrium within 147 mins at 2 mM Cu<sup>2+</sup> in accordance with a pseudo-second-order model.

scholarly journals Equilibrium and Kinetic Study of Lead and Copper Ion Adsorption on Chitosan-Grafted-Polyacrylic Acid Synthesized by Surface Initiated Atomic Transfer Polymerization

Molecules ◽  
2018 ◽  
Vol 23 (9) ◽  
pp. 2218 ◽  
Author(s):  
Carlos Grande-Tovar ◽  
William Vallejo ◽  
Fabio Zuluaga
Keyword(s):  
Adsorption Capacity ◽  
Polyacrylic Acid ◽  
Adsorption Process ◽  
Kinetic Constant ◽  
Copper Ion ◽  
Toxic Metal ◽  
Maximum Adsorption Capacity ◽  
Order Model ◽  
Equilibrium Studies ◽  
Pseudo Second Order

In this work, we synthesized chitosan grafted-polyacrylic acid (CS-g-PA) through surface-initiated atom transfer radical polymerization (SI-ATRP). We also studied the adsorption process of copper and lead ions onto the CS-g-PA surface. Adsorption equilibrium studies indicated that pH 4.0 was the best pH for the adsorption process and the maximum adsorption capacity over CS-g-PA for Pb2+ ions was 98 mg·g−1 and for Cu2+ it was 164 mg·g−1, while for chitosan alone (CS), the Pb2+ adsorption capacity was only 14.8 mg·g−1 and for Cu2+ it was 140 mg·g−1. Furthermore, the adsorption studies indicated that Langmuir model describes all the experimental data and besides, pseudo-second-order model was suitable to describe kinetic results for the adsorption process, demonstrating a larger kinetic constant of the process was larger for Pb2+ than Cu2+. Compared to other adsorbents reported, CS-g-PA had comparable or even superior adsorbent capacity and besides, all these results suggest that the new CS-g-PA polymers had potential as an adsorbent for hazardous and toxic metal ions produced by different industries.

Selective Removal of Hg2+ Ions from Water Using New Functionalized Silica Resin: Equilibrium, Thermodynamics and Kinetic Modeling Studies

2021 ◽  
Vol 43 (4) ◽  
pp. 436-436
Author(s):  
Nida Shams Jalbani Nida Shams Jalbani ◽  
Amber R Solangi Amber R Solangi ◽  
Shahabuddin Memon Shahabuddin Memon ◽  
Ranjhan Junejo Ranjhan Junejo ◽  
Asif Ali Bhatti Asif Ali Bhatti
Keyword(s):  
Adsorption Capacity ◽  
Adsorption Mechanism ◽  
Solid Phase ◽  
Maximum Adsorption Capacity ◽  
Adsorption Phenomenon ◽  
Column Adsorption ◽  
Pseudo Second Order ◽  
Ft Ir ◽  
Wastewater Samples ◽  
Ft Ir Spectroscopy

In current study, the diphenylaminomethylcalix[4]arene (3) was synthesized and immobilized onto silica surface to prepare a selective, regenerable and stable resin-4. The synthesized resin-4 has been characterized by FT-IR spectroscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy (EDX) and Brunauer-Emmett-Teller (BET) techniques. To check the adsorption capacity of resin-4, the batch and column adsorption methodology were applied and it has observed that the resin-4 was selectively removed Hg2+ ions under the optimized parameters. The maximum adsorption capacity was obtained at pH 9 using 25 mg/L of resin-4. Under the optimal conditions, different equilibrium, kinetic and thermodynamic models were applied to experimental data. The results show that adsorption mechanism is chemical in nature following Langmuir model with good correlation coefficient (R2=0.999) and having 712.098 (mmol/g) adsorption capacity. The energy of calculated from D-R model suggests the ion exchange nature of the adsorption phenomenon. Dynamic adsorption experiments were conducted using Thomas model. The maximum solid phase concentration (qo) was 7.5 and rate constant was found to be 0.176 with (R2=0.938) for Hg2+ ions. The kinetic study describes that the adsorption mechanism follows pseudo second order (R2=0.999). The thermodynamic parameters such as ∆H (0.032 KJ/mol) and ∆S (0.127 KJ/mol /K) and ∆G (-5.747,-6.306, -7.027 KJ/mol) shows that the adsorption of Hg2+ ion is endothermic and spontaneous. The reusability of resin-4 was also checked and it has observed that the after 15 cycle only 1.2 % adsorption reduces. Moreover, the resin-4 was applied on real wastewater samples obtained from local industrial zone of Karachi, Sindh-Pakistan.

Preparation of Graphene Oxide Modified Rice Husk for Cr(VI) Removal

2019 ◽  
Vol 19 (11) ◽  
pp. 7035-7043 ◽  
Author(s):  
Tong Ouyang ◽  
Jidan Tang ◽  
Fang Liu ◽  
Chang-Tang Chang
Keyword(s):  
Graphene Oxide ◽  
Adsorption Capacity ◽  
Rice Husk ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Adsorption Sites ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Alkaline Conditions ◽  
Rice Husk Biochar

The objective of this paper is to study the removal of Cr(VI) in aqueous solution by using a new graphene oxide-coated rice husk biochar composite (GO-RHB). GO-RHB is a synthetic material having a porous structure with lots of oxygen-containing functional groups and a large surface area that provide effective adsorption sites. Experiments showed that GO-RHB had higher adsorption capacity under acidic than under alkaline conditions. At pH of 2, GO-RHB has the maximum adsorption capacity(48.8 mg g−1). Equilibrium data obtained by fitting with the Langmuir and Freundlich models indicate that the reaction process was monolayer adsorption. The adsorption of Cr(VI) followed the pseudo-second-order kinetic model that illustrates chemical adsorption. Intraparticlediffusion studies further revealed that film diffusion was taking place. Moreover, the results of thermodynamics showed that the adsorption process was endothermic and spontaneous in nature. The removal mechanism of Cr(VI) was also explained in detail. The prepared adsorbent is highly efficient and might be useful than many other conventional adsorbent used for the removal of Cr(VI) from wastewater.

Preparation of bio-based magnetic adsorbent and application for efficient removal of Cd(II) from water

2018 ◽  
Vol 77 (5) ◽  
pp. 1313-1323 ◽  
Author(s):  
Jianjun Zhou ◽  
Xionghui Ji ◽  
Xiaohui Zhou ◽  
Jialin Ren ◽  
Yaochi Liu
Keyword(s):  
Aqueous Solution ◽  
Adsorption Process ◽  
Low Cost ◽  
Maximum Adsorption Capacity ◽  
Magnetic Adsorbent ◽  
Order Model ◽  
Efficient Removal ◽  
Adsorption Ability ◽  
Adsorption Sites ◽  
Pseudo Second Order

Abstract A novel magnetic bio-adsorbent (MCIA) was developed, characterized and tested for its Cd(II) removal from aqueous solution. MCIA could be easily separated from the solution after equilibrium adsorption due to its super-paramagnetic property. The functional and magnetic bio-material was an attractive adsorbent for the removal of Cd(II) from aqueous solution owing to the abundant adsorption sites, amino-group and oxygen-containing groups on the surface of Cyclosorus interruptus. The experimental results indicated that the MCIA exhibited excellent adsorption ability and the adsorption process was spontaneous and endothermic. The adsorption isotherm was consistent with the Langmuir model. The adsorption kinetic fitted the pseudo-second-order model very well. The maximum adsorption capacity of Cd(II) onto MCIA was 40.8, 49.4, 54.6 and 56.6 mg/g at 293, 303, 313 and 323 K, respectively. And the MCIA exhibited an excellent reusability and impressive regeneration. Therefore, MCIA could serve as a sustainable, efficient and low-cost magnetic adsorbent for Cd(II) removal from aqueous solution.

Alkaline deoxygenated graphene oxide as adsorbent for cadmium ions removal from aqueous solutions

2015 ◽  
Vol 71 (11) ◽  
pp. 1611-1619 ◽  
Author(s):  
Jun Liu ◽  
Hongyan Du ◽  
Shaowei Yuan ◽  
Wanxia He ◽  
Pengju Yan ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Aqueous Solutions ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Transmission Electron ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Ft Ir

Alkaline deoxygenated graphene oxide (aGO) was prepared through alkaline hydrothermal treatment and used as adsorbent to remove Cd(II) ions from aqueous solutions for the first time. The characterization results of transmission electron microscopy, X-ray diffraction, Raman spectroscopy, and Fourier transform infrared (FT-IR) spectra indicate that aGO was successfully synthesized. The batch adsorption experiments showed that the adsorption kinetics could be described by the pseudo-second-order kinetic model, and the isotherms equilibrium data were well fitted with the Langmuir model. The maximum adsorption capacity of Cd(II) on aGO was 156 mg/g at pH 5 and T = 293 K. The adsorption thermodynamic parameters indicated that the adsorption process was a spontaneous and endothermic reaction. The mainly adsorption mechanism speculated from FT-IR results may be attributed to the electrostatic attraction between Cd2+ and negatively charged groups (–CO−) of aGO and cation-π interaction between Cd2+ and the graphene planes. The findings of this study demonstrate the potential utility of the nanomaterial aGO as an effective adsorbent for Cd(II) removal from aqueous solutions.

Graphene-Based Nanocomposites for Enhanced Pb2+ Adsorption

2017 ◽  
Vol 13 ◽  
pp. 323-329 ◽  
Author(s):  
Anastasiya E. Kucherova ◽  
Irina V. Romantsova ◽  
Alexandr E. Burakov ◽  
Nariman R. Memetov ◽  
Mikhail N. Krasnyansky
Keyword(s):  
Aqueous Solutions ◽  
Adsorption Capacity ◽  
Kinetic Data ◽  
Adsorption Equilibrium ◽  
Intercalation Compound ◽  
Expanded Graphite ◽  
Graphite Intercalation Compound ◽  
Order Model ◽  
Graphite Intercalation ◽  
Pseudo Second Order

The present paper describes an investigation of the adsorption of lead ions (Pb2+) on graphene-based nanocomposites obtained via exfoliation of hydrolyzed expanded graphite intercalation compound. Three types of these nanocomposites - suspension of graphene nanoplatelets (SGN), paste of multi-layered oxidized graphene (PMOG), and paste of few-layered oxidized graphene (PFOG) - were used to extract Pb2+ from 1,040 mg L-1 aqueous solutions of Pb (NO3)2, and the kinetic of the Pb2+ adsorption was studied. It was found that the kinetic data are best fitted by the pseudo-second-order model. The adsorption equilibrium was achieved within 30 min under normal conditions. The maximum Pb2+ adsorption capacity of SGN, PMOG and PFOG was found to be 457, 103 and 38 mg g-1, respectively. Considering the obtained results, it can be assumed that the phenolic and hydroxyl oxygen-containing functional groups located at the surface of the adsorption materials under study play an important role in the Pb2+ removal process.

scholarly journals Adsorption of Copper(II) and Mercury(II) Ions onto Chemically-Modified Chitosan Membranes: Equilibrium and Kinetic Properties

2012 ◽  
Vol 30 (1) ◽  
pp. 1-21 ◽  
Author(s):  
R.B. Rabelo ◽  
R.S. Vieira ◽  
F.M.T. Luna ◽  
E. Guibal ◽  
M.M. Beppu
Keyword(s):  
Adsorption Capacity ◽  
Metal Ion ◽  
Batch Process ◽  
Second Order ◽  
Infrared Spectrometry ◽  
Maximum Adsorption Capacity ◽  
Kinetic Properties ◽  
Pseudo Second Order ◽  
Ft Ir ◽  
Chitosan Membranes

Cross-linked chitosan was synthesized with glutaraldehyde (chitosan–GLA) and epichlorohydrin (chitosan–ECH). The structures of these matrices were characterized by elemental analysis, Fourier-transform infrared spectrometry (FT-IR), the degree of de-acetylation and the surface topography as determined via scanning electron microscopy (SEM). After promoting interaction with the metal ion, the adsorbent was also studied using FT-IR and energy dispersive X-ray spectroscopy (EDXS). Adsorption studies for Cu(II) and Hg(II) ions were carried out in a batch process. The adsorption kinetics were tested using three models, viz. pseudo-first-order, pseudo-second-order and intra-particle diffusion. The experimental kinetic data were best fitted by the pseudo-second-order model for Cu(II) ions (R2 ≥ 0.98) and for Hg(II) ions (R2 = 0.99). Higher rate constants (k2) were obtained for the adsorption of Cu(II) ions onto chitosan–GLA [1.40 g/(mmol h)] and for Hg(II) ions onto raw chitosan [5.65 g/(mmol h)]. The adsorption rate depended on the concentration of Cu(II) and Hg(II) ions on the adsorbent surface and on the quantity of ions adsorbed at equilibrium. At 293 K, the Langmuir–Freundlich model provided a better fit to the adsorption isotherms on both raw and cross-linked chitosan membranes. The maximum adsorption capacity for Cu(II) ions was obtained with the chitosan–GLA matrix (2.7 mmol/g). A maximum adsorption capacity of 3.1 mmol/g was attained for Hg(II) ions onto the chitosan–ECH matrix.

Facile synthesis of chitosan nanoparticle-modified MnO2 nanoflakes for ultrafast adsorption of Pb(II) from aqueous solution

2016 ◽  
Vol 17 (1) ◽  
pp. 32-38 ◽  
Author(s):  
Tianli Han ◽  
Xiaoman Zhang ◽  
Xiangqian Fu ◽  
Jinyun Liu
Keyword(s):  
Aqueous Solution ◽  
Ph Value ◽  
Langmuir Model ◽  
Maximum Adsorption Capacity ◽  
Order Model ◽  
Facile Synthesis ◽  
Adsorption Sites ◽  
Chitosan Nanoparticle ◽  
Pseudo Second Order ◽  
Potential Strategy

Chitosan nanoparticle (CS NP)-modified MnO2 nanoflakes were presented as a novel adsorbent for fast adsorption of Pb(II) from aqueous solution. Loading dense CS NPs onto mono-dispersive flower-like MnO2 nanostructures reduces the overlap of CS during adsorption, and thus improves the contact of functional adsorption sites on the surface of MnO2 nanoflakes with heavy metal ions. The results show that the removal efficiency of the nanoadsorbents reaches up to 93% in 3 min for Pb(II). In addition, the maximum adsorption capacity, effects of adsorbent dosage and pH value, and the reusability were investigated. The kinetic process and adsorption isotherm fit well with the pseudo-second-order model and Langmuir model, respectively. These findings provide a potential strategy to address the overlap issue of some common nanoadsorbents.

scholarly journals Highly Effective Covalently Crosslinked Composite Alginate Cryogels for Cationic Dye Removal

Gels ◽  
2021 ◽  
Vol 7 (4) ◽  
pp. 178
Author(s):  
Serap Sezen ◽  
Vijay Kumar Thakur ◽  
Mehmet Murat Ozmen
Keyword(s):  
Adsorption Capacity ◽  
Dye Removal ◽  
Low Cost ◽  
Dye Adsorption ◽  
Maximum Adsorption Capacity ◽  
High Porosity ◽  
Order Model ◽  
Removal Capacity ◽  
Pseudo Second Order ◽  
The One

Currently, macroporous hydrogels have been receiving attention in wastewater treatment due to their unique structures. As a natural polymer, alginate is used to remove cationic dyes due to its sustainable features such as abundance, low cost, processability, and being environmentally friendly. Herein, alginate/montmorillonite composite macroporous hydrogels (cryogels) with high porosity, mechanical elasticity, and high adsorption yield for methylene blue (MB) were generated by the one-step cryogelation technique. These cryogels were synthesized by adding montmorillonite into gel precursor, followed by chemical cross-linking employing carbodiimide chemistry in a frozen state. The as-prepared adsorbents were analyzed by FT-IR, SEM, gel fraction, swelling, uniaxial compression, and MB adsorption tests. The results indicated that alginate/montmorillonite cryogels exhibited high gelation yield (up to 80%), colossal water uptake capacity, elasticity, and effective dye adsorption capacity (93.7%). Maximum adsorption capacity against MB was 559.94 mg g−1 by linear regression of Langmuir model onto experimental data. The Pseudo-Second-Order model was fitted better onto kinetic data compared to the Pseudo-First-Order model. Improved porosity and mechanical elasticity yielding enhanced dye removal capacity make them highly potential alternative adsorbents compared to available alginate/montmorillonite materials for MB removal.

Adsorption kinetics and thermodynamics of acid Bordeaux B from aqueous solution by graphene oxide/PAMAMs

2015 ◽  
Vol 72 (7) ◽  
pp. 1217-1225 ◽  
Author(s):  
Fan Zhang ◽  
Shengfu He ◽  
Chen Zhang ◽  
Zhiyuan Peng
Keyword(s):  
Graphene Oxide ◽  
Adsorption Capacity ◽  
Ph Value ◽  
Maximum Adsorption Capacity ◽  
Freundlich Model ◽  
Equilibrium Data ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Effects Of Media ◽  
Better Than

Graphene oxide/polyamidoamines dendrimers (GO/PAMAMs) composites were synthesized via modifying GO with 2.0 G PAMAM. The adsorption behavior of the GO/PAMAMs for acid Bordeaux B (ABB) was studied and the effects of media pH, adsorption time and initial ABB concentration on adsorption capacity of the adsorbent were investigated. The optimum pH value of the adsorption of ABB onto GO/PAMAMs was 2.5. The maximum adsorption capacity increased from 325.78 to 520.83 mg/g with the increase in temperature from 298 to 328 K. The equilibrium data followed the Langmuir isotherm model better than the Freundlich model. The kinetic study illustrated that the adsorption of ABB onto GO/PAMAMs fit the pseudo-second-order model. The thermodynamic parameters indicated that the adsorption process was physisorption, and also an endothermic and spontaneous process.

Sign in / Sign up

Export Citation Format

Share Document