scholarly journals The effect of different force magnitudes for placement of orthodontic brackets on shear bond strength, in three adhesive systems

2018 ◽  
pp. 0-0 ◽  
Author(s):  
A Mohammadi ◽  
S Pourkhameneh ◽  
AH Sadrhaghighi
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Orthodontic Brackets ◽  
Adhesive Systems

scholarly journals Rebonding of Orthodontic Brackets

2008 ◽  
Vol 78 (3) ◽  
pp. 531-536 ◽  
Author(s):  
Mona A. Montasser ◽  
James L. Drummond ◽  
Carla A. Evans
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Clinical Performance ◽  
Adhesive System ◽  
Orthodontic Brackets ◽  
Adhesive Systems ◽  
Adhesive Remnant Index ◽  
Acid Etch ◽  
The Mean ◽  
Self Etch

Abstract Objective: To compare rebonding of orthodontic brackets based on the hypothesis that no difference would be found between the adhesive systems with respect to shear bond strength, mode of failure, and clinical failure rates. Materials and Methods: The three adhesive systems included two self-etch primers (Transbond and M-Bond) and a conventional phosphoric acid etch (Rely-a-Bond). The sample size was 20 premolars for each adhesive system. The shear bond strength was tested 24 hours after bracket bonding with the bonding/debonding procedures repeated two times after the first debonding. Bond strength, adhesive remnant index (ARI), and failure sites were evaluated for each debonding. Statistical analysis consisted of a two-way analysis of variance (ANOVA) followed by Scheffè analysis. The clinical portion evaluated 15 patients over a 12-month period. Results: The mean shear bond strengths after the first, second, and third debondings for Rely-a-Bond were 8.4 ± 1.8, 10.3 ± 2.4, and 14.1 ± 3.3 MPa, respectively; for Transbond 11.1 ± 4.6, 13.6 ± 4.5, and 12.9 ± 4.4 MPa, respectively; and for M-Bond 8.7 ± 2.7, 10.4 ± 2.4, and 12.4 ± 3.4 MPa, respectively. After the three debondings the mean shear bond strength increased significantly from the first to the third debonding for Rely-a-Bond and M-bond (P ≤ .001), but did not change for Transbond (P = .199). Conclusions: The original hypothesis is not rejected. The two self-etching primers showing higher or comparable bond strength to the conventional phosphoric etch with less adhesive remnant on the enamel surface after the first debonding. With repeated bonding/debonding, the differences in the bond strength, ARI, and failure site were not significantly different. There was no difference in the clinical performance of the three adhesive systems (P = .667).

scholarly journals Effects of adhesive systems at different temperatures on the shear bond strength of orthodontic brackets

2019 ◽  
Vol 13 (2) ◽  
pp. 103-108
Author(s):  
Serdar Akarsu ◽  
Suleyman Kutalmış Buyuk ◽  
Ahmet Serkan Kucukekenci
Keyword(s):  
Body Temperature ◽  
Bond Strength ◽  
Shear Bond Strength ◽  
Testing Machine ◽  
The Body ◽  
Orthodontic Brackets ◽  
Effect Of Temperature ◽  
Adhesive Systems ◽  
Significant Difference ◽  
Different Temperatures

Background. The temperature might affect the physical and mechanical properties of adhesive materials by reducing the polymerization rate. The present study aimed to evaluate the effect of temperature on the shear bond strength of metallic orthodontic brackets using various adhesive resin systems. Methods. Extracted human premolar teeth were randomly assigned to 8 groups (n=10) for bonding with the two available orthodontics adhesive systems (Transbond XT and NeoBond) at different temperatures: refrigeration temperature (4°C), room temperature (20°C), human body temperature (36°C) and high temperature (55°C). The shear bond strength (SBS) test was performed using a universal testing machine at a crosshead speed of 0.5 mm/min. The adhesive remnant index (ARI) was assigned to the fractured orthodontic brackets. Data were analyzed with one-way ANOVA, post hoc Tukey tests and independent t-test. Results. Transbond XT exhibited higher SBS values compared to Neobond at all the tested temperatures; however, a statistically significant difference was not observed (P>0.05). The SBS results were minimum at 4°C and maximum at 36°C in both the adhesive groups (P<0.05). Conclusion. Pre-heating orthodontic adhesives up to the body temperature prior to bonding the brackets in orthodontic treatment increased the bond strength of orthodontic brackets.

Effect of different times of solvent evaporation and pH in two self-etching adhesive systems on the shear bond strength of metallic orthodontic brackets

2014 ◽  
Vol 50 ◽  
pp. 223-227 ◽  
Author(s):  
Pedro Henrique Dias Brasiliense Frota ◽  
Auro Tanaka ◽  
Alessandro D. Loguercio ◽  
Darlon Martins Lima ◽  
Ceci Nunes Carvalho ◽  
...  
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Solvent Evaporation ◽  
Orthodontic Brackets ◽  
Adhesive Systems

Influence of saliva contamination on the shear bond strength of orthodontic brackets bonded with self-etching adhesive systems

2010 ◽  
Vol 138 (1) ◽  
pp. 79-83 ◽  
Author(s):  
Sergio Ricardo Campos Maia ◽  
Vanessa Cavalli ◽  
Priscila Christiane Suzy Liporoni ◽  
Marcos Augusto do Rego
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Orthodontic Brackets ◽  
Adhesive Systems ◽  
Saliva Contamination

scholarly journals Shear Bond Strength of Orthodontic Brackets Fixed with Remineralizing Adhesive Systems after Simulating One Year of Orthodontic Treatment

2015 ◽  
Vol 2015 ◽  
pp. 1-7 ◽  
Author(s):  
Gisele Lima Bezerra ◽  
Carlos Rocha Gomes Torres ◽  
Mateus Rodrigues Tonetto ◽  
Alvaro Henrique Borges ◽  
Milton Carlos Kuga ◽  
...  
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Orthodontic Treatment ◽  
Testing Machine ◽  
Orthodontic Brackets ◽  
Adhesive Systems ◽  
Thermomechanical Cycling ◽  
Significant Difference ◽  
One Year

The objective of this study is to assess,in vitro, the shear bond strength of orthodontic brackets fixed with remineralizing adhesive systems submitted to thermomechanical cycling, simulating one year of orthodontic treatment. Sixty-four bovine incisor teeth were randomly divided into 4 experimental groups (n=16):XT: Transbond XT,QC: Quick Cure,OL: Ortholite Color, andSEP: Transbond Plus Self-Etching Primer. The samples were submitted to thermomechanical cycling simulating one year of orthodontic treatment. Shear bond strength tests were carried out using a universal testing machine with a load cell of 50 KgF at 0.5 mm/minute. The samples were examined with a stereomicroscope and a scanning electron microscope (SEM) in order to analyze enamel surface and Adhesive Remnant Index (ARI). Kruskal-Wallis and Mann-Whitney (with Bonferroni correction) tests showed a significant difference between the studied groups (p<0.05). Groups XT, QC, and SEP presented the highest values of adhesive resistance and no statistical differences were found between them. The highest frequency of failures between enamel and adhesive was observed in groups XT, QC, and OL. Quick Cure (QC) remineralizing adhesive system presented average adhesive resistance values similar to conventional (XT) and self-etching (SEP) adhesives, while remineralizing system (OL) provided the lowest values of adhesive resistance.

scholarly journals Do Products Preventing Demineralization Around Orthodontic Brackets Affect Adhesive Bond Strength?

2018 ◽  
Vol 12 (1) ◽  
pp. 1029-1035
Author(s):  
Bennett T. Amaechi ◽  
Kaveh Najibfard ◽  
Irene P. Chedjieu ◽  
Hariyali Kasundra ◽  
Linda O. Okoye
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Testing Machine ◽  
Adhesive Bond ◽  
Orthodontic Brackets ◽  
Adhesive Systems ◽  
Lesion Formation ◽  
Universal Testing ◽  
Priming Enamel ◽  
Resin Sealant

Objective: This study investigated the effects, on the shear bond strength of orthodontic brackets, of using an antimicrobial selenium-containing sealant (DenteShieldTM) to serve dual functions of priming enamel prior to bonding and as a protective barrier against whitespot lesion formation. Materials and Methods: A total of 150 extracted human premolars were randomly assigned into 10 groups (n=15/group). Stainless steel brackets were bonded with two adhesive systems (DenteShieldTM or Transbond XT) after the enamel was conditioned with a primer (DenteShieldTM or Assure Universal) or a filled resin sealant (DenteShieldTM, Pro SealTM or Opal SealTM). The specimens were stored in deionized water at 37 °C for 24 hours and debonded with a universal testing machine. Results: The use of DenteShieldTM adhesive to bond orthodontic brackets to the enamel surface resulted in a significantly lower (P<0.05), but clinically acceptable, shear bond strength (mean & SD: 14.5±1.6 MPa) as compared with Transbond XT group (mean & SD: 19.3±1.7 MPa). DenteShieldTM sealant used as primer resulted in shear bond strength values comparable to those of Pro SealTM and Opal SealTM. All adhesive-sealant and primer-sealant combinations tested in this study exhibited shear bond strength values greater than 9.6 MPa, sufficient for clinical orthodontic needs. Conclusion: DenteShieldTM sealant can serve as primer as well as anti-demineralization sealant during orthodontic treatment without adversely affecting the shear bond strength of the bracket.

scholarly journals Effects of thermomechanical and thermocycling on the shear bond strength of brackets to bovine enamel bonded with conventional and self-etching adhesive systems

2015 ◽  
Vol 18 (3) ◽  
pp. 98 ◽  
Author(s):  
Luciana Sarmento Torres ◽  
Levy Anderson César Alves ◽  
Marcelo Fava ◽  
Rebeca Di Nicoló
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Testing Machine ◽  
Orthodontic Brackets ◽  
Adhesive Systems ◽  
Mechanical Cycling ◽  
Universal Testing ◽  
Number Of Cycles ◽  
Bovine Enamel ◽  
Group Self

Several adhesive systems have been developed in the last decade. T<span lang="EN-US"><span lang="EN-US">he aim of the current study was to evaluate the shear bond strength of orthodontic brackets bonded with conventional primers or self-etching primers, artificially aged by means of thermocycling and thermomechanical procedures.90 bovine incisors were used in the investigation. The roots were sectioned in the amelo-cementary junction. </span></span>All samples were randomly divided in 2 groups ( n= 45), according to the primer used for bracket bonding. XT Group–hydrophobic conventional primer (Transbond XT, 3M unitek, Monrovia, Calif); SEP Group –self-etching primer (Transbond Plus SEP, 3 M Unitek, Monrovia, Calif). All specimens were bonded with XT Transbond resin adhesive (3 M Unitek, Monrovia, Calif). A Universal Testing Machine EMIC DL2000 (EMIC Equip. Sist. Ensaio Ltda., São José dos Pinhais, PR, Brazil) was used for the collection of the values of SBS resistance. The results of the current study were: (Prompt L-Pop 1.72±0.13 MPa; Clearfil SE Bond 1.75±0.19 MPa; FL Bond 1.71±0.22 MPa; One-Up Bond 1.77±0.14 MPa; XT Control 10.5±0.86 MPa). In conclusion: the number of cycles in thermal and thermo mechanical cycling did not influence shear bond strength values for any of the primers tested;SEP Transbond Plus showed the greatest values for bond strength of orthodontic brackets.

scholarly journals Effect of Self-etch Primer-adhesive and Conventional Adhesive Systems on the Shear Bond Strength and Bond Failure of Orthodontic Brackets: A Comparative Study

2015 ◽  
Vol 16 (2) ◽  
pp. 130-134 ◽  
Author(s):  
N Sanjay ◽  
RNG Rajesh ◽  
KS Girish ◽  
Malthesh B Savakkanavar ◽  
S Sreedhara ◽  
...  
Keyword(s):  
Bond Strength ◽  
Comparative Study ◽  
Shear Bond Strength ◽  
Adhesive System ◽  
Orthodontic Brackets ◽  
Adhesive Systems ◽  
Bond Failure ◽  
Fifth Generation ◽  
Sixth Generation ◽  
Self Etch

ABSTRACT Background Prompt-L-Pop is a sixth generation bonding system contains methacrylated phosphoric acid esters that combine an acidic component for etching the enamel and a primer, is an all-in-one adhesive. This study was undertaken to compare the bonding strength of brackets to enamel with traditional bonding technique and the new Prompt-L-Pop system using the same composite resin. Materials and methods In this in vitro experimental study, 60 human premolar teeth extracted for orthodontic treatment were collected. The samples were randomly divided into three groups comprising of 20 teeth in each group. Shear bond strength and ARI scores for the specimens were measured. Comparison was done using one way ANOVA and Chi-square test. Results Fourth generation bonding adhesive system depicted similar bond strength to fifth generation bonding adhesive system. Both fourth and fifth generation exhibited higher shear bond strength as compared to sixth generation bonding adhesive system. Conclusion Fourth and fifth generation exhibited higher shear bond strength as compared to sixth generation bonding adhesive system but the sixth generation has clinically acceptable shear bond strength. Also, it was found that sixth generation leaves less residual adhesive on the tooth after bracket removal. How to cite this article Sreedhara S, Savakkanavar MB, Rajesh RNG, Ankireddy RKR, Sanjay N, Girish KS. Effect of Self-etch Primer-adhesive and Conventional Adhesive Systems on the Shear Bond Strength and Bond Failure of Orthodontic Brackets: A Comparative Study. J Contemp Dent Pract 2015;16(2):130-134.

Sign in / Sign up

Export Citation Format

Share Document