scholarly journals Determination of GCPs of Satellite Imagery using Digital Elevation Model.

Author(s):  
Yoshikazu IIKURA ◽  
Ryuzo YOKOYAMA
Author(s):  
X. Qiao ◽  
S. H. Lv ◽  
L. L. Li ◽  
X. J. Zhou ◽  
H. Y. Wang ◽  
...  

Compared to the wide use of digital elevation model (DEM), digital surface model (DSM) receives less attention because that it is composed by not only terrain surface, but also vegetations and man-made objects which are usually regarded as useless information. Nevertheless, these objects are useful for the identification of obstacles around an aerodrome. The primary objective of the study was to determine the applicability of DSM in obstacle clearance surveying of aerodrome. According to the requirements of obstacle clearance surveying at QT airport, aerial and satellite imagery were used to generate DSM, by means of photogrammetry, which was spatially analyzed with the hypothetical 3D obstacle limitation surfaces (OLS) to identify the potential obstacles. Field surveying was then carried out to retrieve the accurate horizontal position and height of the obstacles. The results proved that the application of DSM could make considerable improvement in the efficiency of obstacle clearance surveying of aerodrome.


2020 ◽  
Vol 13 (2) ◽  
pp. 713
Author(s):  
Danilo Da Silva Dutra ◽  
André Ricardo Furlan ◽  
Luís Eduardo De Souza Robaina

O relevo é a base onde todas as populações vivem e desenvolvem suas atividades, derivando dessa relação vantagens e desvantagens, daí a importância de conhecê-lo através do estudo de suas diferentes formas e elementos. Nesse contexto insere-se a importância de metodologias para o seu estudo, sendo que atualmente vivencia-se a expressividade de dados disponíveis para aplicação de geoprocessamento. A partir das geotecnologias pode-se empreender diversas análises sobre o relevo, destacando-se nesse contexto, a proposta dos geomorphons a qual foi aplicada na bacia hidrográfica do arroio Pantanoso. O objetivo da pesquisa é a identificação e análise dos elementos do relevo definido por geomorphons, quais sejam: 1) Planos, 2) Picos, 3) Cristas, 4) Ressaltos, 5) Crista secundária, 6) Encostas, 7) Escavado, 8) Base de encosta, 9) Vales e 10) Fosso. A determinação dos geomorphons foi a partir do processamento em ambiente SIG do Modelo Digital de Elevação (MDE) do Shuttle Radar Topograph Mission (SRTM) com resolução espacial 3 arcsec (90 metros), “L” Lookup (distância em metros) definiu-se como de 20 pixels (1800 metros) e o “T” Theresholdt (nivelamento em graus) definiu-se em 2º. Para visualização do comportamento dos elementos do relevo na área de estudo realizaram-se trabalhos de campo, o que contribuiu para evidenciar a padronização desses elementos. Os quatro elementos geomorphons mais representativos são encostas, vales, cristas e planos. Subdivision of relief elements through the proposal of geomorphons: river basin of arroio Pantanoso - Canguçu/RS A B S T R A C TRelief is the basis where all populations live and develop their activities, deriving from this relation advantages and disadvantages, hence the importance of knowing it through the study of its different forms and elements. In this context, the importance of methodologies for its study is inserted and geoprocessing application for data available for is currently experienced. From the geotechnologies one can undertake several analyzes on the relief, highlighting in this context, the proposal of the geomorphons which was applied in Pantanoso stream basin. The objective of the research is to identify and analyze the elements of the relief defined by geomorphons, namely: 1) Flats, 2) Peaks, 3) Ridges, 4) Shoulders, 5) Spurs, 6)Slopes, 7) Hollows, 8) Footslope, 9) Valley and 10) Pits. The determination of the geomorphons was based on the GIS environment of the Shuttle Radar Topograph Mission (SRTM) Digital Elevation Model (DEM) with spatial resolution 3 arcsec (90 meters), "L" Lookup (distance in meters) was defined as of 20 pixels (1800 meters) and the "T" Theresholdt (leveling in degrees) was defined in 2º. In order to visualize the behavior of the relief elements in the study area, fieldwork was carried out, which contributed to the standardization of these elements. The four most representative geomorphons, which are: Slopes, Valleys, Ridges and Flat.Keywords: SIG, Geomorphons; Canguçu/RS; relief


2001 ◽  
Vol 240 (3-4) ◽  
pp. 225-242 ◽  
Author(s):  
R Turcotte ◽  
J.-P Fortin ◽  
A.N Rousseau ◽  
S Massicotte ◽  
J.-P Villeneuve

Geomorphology ◽  
2008 ◽  
Vol 100 (3-4) ◽  
pp. 453-464 ◽  
Author(s):  
Hossein Saadat ◽  
Robert Bonnell ◽  
Forood Sharifi ◽  
Guy Mehuys ◽  
Mohammad Namdar ◽  
...  

1994 ◽  
Vol 99 (B10) ◽  
pp. 20225-20242 ◽  
Author(s):  
Jean Chorowicz ◽  
Pascal Luxey ◽  
Nikos Lyberis ◽  
José Carvalho ◽  
Jean-François Parrot ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document