Measurement of Fuel Evaporative Emissions from Gasoline Powered Passenger Carsand Light Trucks Using the Enclosure Technique

1977 ◽  
Author(s):  
2020 ◽  
Vol 3 (1) ◽  
pp. 61
Author(s):  
Kazuhiro Aruga

In this study, two operational methodologies to extract thinned woods were investigated in the Nasunogahara area, Tochigi Prefecture, Japan. Methodology one included manual extraction and light truck transportation. Methodology two included mini-forwarder forwarding and four-ton truck transportation. Furthermore, a newly introduced chipper was investigated. As a result, costs of manual extractions within 10 m and 20 m were JPY942/m3 and JPY1040/m3, respectively. On the other hand, the forwarding cost of the mini-forwarder was JPY499/m3, which was significantly lower than the cost of manual extractions. Transportation costs with light trucks and four-ton trucks were JPY7224/m3 and JPY1298/m3, respectively, with 28 km transportation distances. Chipping operation costs were JPY1036/m3 and JPY1160/m3 with three and two persons, respectively. Finally, the total costs of methodologies one and two from extraction within 20 m to chipping were estimated as JPY9300/m3 and JPY2833/m3, respectively, with 28 km transportation distances and three-person chipping operations (EUR1 = JPY126, as of 12 August 2020).


Author(s):  
Jeremy A. Decker ◽  
Samantha H. Haus ◽  
Rini Sherony ◽  
Hampton C. Gabler

In 2015, there were 319,195 police reported vehicle-animal crashes, resulting in 275 vehicle occupant fatalities. Animal-detecting automatic emergency braking (AEB) systems are a promising active safety measure which could potentially avoid or mitigate many of these crashes by warning the driver, utilizing automatic braking, or both. The purpose of this study was to develop and characterize a target population of vehicle-animal crashes applicable to AEB systems and to analyze the potential benefits of an animal-detecting AEB system. The study was based on two nationally representative databases, Fatality Analysis Reporting System and the National Automotive Sampling System’s General Estimates System, and a naturalistic driving study, SHRP 2. The target population was restricted to vehicle-animal crashes that were forward impacts or road departures and involved cars and light trucks, with no loss of control. Crash characteristics which may influence the performance of AEB such as lighting, weather, pre-crash movement, relation to junction, and first and worst harmful events, were analyzed. The study found that the major influences on the effectiveness of animal AEB systems were: weather, lighting, pre-crash movements, and the crash location. Six potential target populations were used to analyze the potential effectiveness of an animal AEB system, with effectiveness ranging between 21.6% and 97% of police reported crashes and between 4.1% and 50.8% of fatal vehicle-animal crashes. An AEB system’s ability to function in low light and poor weather conditions may enable it to avoid a substantially higher proportion of crashes.


Author(s):  
Rasoul Moradi ◽  
Chandrashekhar K. Thorbole ◽  
Michael McCoy ◽  
Hamid M. Lankarani

Accident data reveals that in most pedestrian accidents, the pedestrian head and lower extremity are vulnerable to serious injuries. The vehicle front geometry profile as well as the impact speed are important factors affecting the pedestrian kinematics and injury potential. In the US, accident data also shows that the fatality rate for pedestrian/light trucks and vans (LTV) impact is greater than that for the pedestrian/passenger-car impact. Addition of a front guard on light trucks and sports utility vehicles to mitigate damage during off-road activity or to provide mounting points for extra lights, makes the pedestrian more vulnerable to the impact. In this paper, a computational technique is utilized to study the influence of the added front guard on the impacted pedestrian. A CAD model of a typical commercial frontal guard is developed and converted into a rigid facet model, and attached to the vehicle front. The validated standing dummy model in the MADYMO code is used to simulate a pedestrian, and the rigid facet-surface model of a pickup truck is used to generate a vehicle front surface. This computational model is validated by comparing the pedestrian kinematics with the published data. This study demonstrates that the pedestrian mid body region is more vulnerable with the addition of guard on the vehicle. The result from this study facilitates a better understanding of a guard design and its geometry profile as required to protect vulnerable road users.


Fuel ◽  
2021 ◽  
Vol 304 ◽  
pp. 121427
Author(s):  
Luca Romagnuolo ◽  
Emma Frosina ◽  
Assunta Andreozzi ◽  
Adolfo Senatore ◽  
Francesco Fortunato

Sign in / Sign up

Export Citation Format

Share Document