BOLT, MACHINE - DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATE, NICKEL ALLOY (UNS N07001), .4375-20UNJF-3A

2021 ◽  
Author(s):  
Keyword(s):  
Nickel Alloy ◽  
Silver Plate

The butterfly martensite nucleation in an iron and nickel alloy

1990 ◽  
Vol 48 (4) ◽  
pp. 906-907
Author(s):  
Q.Z. Chen ◽  
X.F. Wu ◽  
T. Ko
Keyword(s):  
Nickel Alloy ◽  
Ethyl Alcohol ◽  
Dislocation Structure ◽  
Martensite Transformation ◽  
Room Temperature ◽  
The Matrix

Some butterfly martensite nuclei were observed in an Fe-27.6Ni-0.89V-0.05C alloy. The alloy was austenitized at 1200°C for 1 hour. Some samples were aged at 850° C for 40 minutes and quenched in 10% brine at room temperature. All the samples were cooled in ethyl alcohol for martensite transformation.A nucleus in an unaged specimen is shown in Fig.1. The nucleus has certain contrast different from the matrix and is shaped like one wing of a butter fly martensite. The SADP of the circled region is measured to be: da=dh, and approximate to dγ(111) and dm(110) with ∠AOB = 55° . It is similar to [011]f.c.c and b patterns in the anglez ∠AOB and the ratio ra/rb, respectively. The SADP shows that the structure of the nucleus is between f.c.c and b.c.c. The dislocation structure within the nucleus is shown in Fig.2. Their Burgers vectors and line directions are also given in it. There are many long dislocations near it without dislocations piled up as shown in Fig.3.Long dislocations are closed at one end as an envelope.

BERYLCO NICKEL ALLOY 440

Alloy Digest ◽  
1975 ◽  
Vol 24 (9) ◽  
Keyword(s):  
Mechanical Properties ◽  
High Temperature ◽  
Nickel Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Electronic Components ◽  
High Temperature Mechanical Properties ◽  
Temperature Performance ◽  
Solution Treated ◽  
Complex Shapes

Abstract BERYLCO NICKEL ALLOY 440 is an age-hardenable nickel-beryllium-titanium alloy that offers high strength, excellent spring properties outstanding formability, good high-temperature mechanical properties, and resistance to corrosion and fatigue. Complex shapes can be produced in the solution-treated (soft) condition and then aged to a minimum tensile strength of 215,500 psi. It is used for mechanical and electrical/electronic components in the temperature range -320 to 800 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-94. Producer or source: Kawecki Berylco Industries Inc.. Originally published September 1964, revised September 1975.

REVERE No. 508

Alloy Digest ◽  
1959 ◽  
Vol 8 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Heat Exchanger ◽  
Physical Properties ◽  
Nickel Alloy ◽  
Salt Water ◽  
Heat Treating ◽  
Feed Water ◽  
Water Heater ◽  
Corrosion Resistant ◽  
Copper Nickel Alloy

Abstract Revere No. 508 is a highly ductile, malleable and corrosion resistant copper-nickel alloy suitable for condenser and heat exchanger tubes and many engineering applications such as salt water piping aboard ship, many components of salt water and fresh water stills, feed water heater tubes and marine coolers. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-81. Producer or source: Revere Copper and Brass Inc..

ISO-ELASTIC

Alloy Digest ◽  
1957 ◽  
Vol 6 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Low Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Temperature Coefficient ◽  
Nickel Alloy ◽  
Modulus Of Elasticity ◽  
Heat Treating ◽  
Precision Instrument ◽  
Iron Nickel

Abstract ISO-ELASTIC is an iron-nickel alloy having low temperature coefficient of the modulus of elasticity. It is suitable for precision instrument springs. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and machining. Filing Code: Fe-14. Producer or source: John Chatillon & Sons.

COPPER ALLOY No. C72600

Alloy Digest ◽  
1991 ◽  
Vol 40 (8) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Nickel Alloy ◽  
Copper Alloy ◽  
Cold Work ◽  
Heat Treating ◽  
Resistance Welding ◽  
Copper Nickel ◽  
Copper Nickel Alloy

Abstract Copper Alloy No. C72600 is a wrought copper-nickel alloy. It has excellent capacity for cold work and may be readily joined by soldering, brazing, arc and resistance welding. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fatigue. It also includes information on forming, heat treating, and joining. Filing Code: Cu-563. Producer or source: Copper and copper alloy mills.

Sign in / Sign up

Export Citation Format

Share Document