Titanium Alloy, Forgings, 5Al - 2.5Sn Annealed, 110 ksi (758 MPa) Yield Strength

1994 ◽  
Author(s):  
Keyword(s):  
Titanium Alloy ◽  
Yield Strength

scholarly journals Microstructure and Tensile Properties of Graphene-Oxide-Reinforced High-Temperature Titanium-Alloy-Matrix Composites

Materials ◽  
2020 ◽  
Vol 13 (15) ◽  
pp. 3358 ◽  
Author(s):  
Hang Chen ◽  
Guangbao Mi ◽  
Peijie Li ◽  
Xu Huang ◽  
Chunxiao Cao
Keyword(s):  
Tensile Strength ◽  
Titanium Alloy ◽  
Graphene Oxide ◽  
High Temperature ◽  
Yield Strength ◽  
Room Temperature ◽  
Second Phase ◽  
Matrix Composites ◽  
Alloy Matrix ◽  
The Matrix

In this study, graphene-oxide (GO)-reinforced Ti–Al–Sn–Zr–Mo–Nb–Si high-temperature titanium-alloy-matrix composites were fabricated by powder metallurgy. The mixed powders with well-dispersed GO sheets were obtained by temperature-controlled solution mixing, in which GO sheets adsorb on the surface of titanium alloy particles. Vacuum deoxygenating was applied to remove the oxygen-containing groups in GO, in order to reduce the introduction of oxygen. The compact composites with refined equiaxed and lamellar α phase structures were prepared by hot isostatic pressing (HIP). The results show that in-situ TiC layers form on the surface of GO and GO promotes the precipitation of hexagonal (TiZr)6Si3 particles. The composites exhibit significant improvement in strength and microhardness. The room-temperature tensile strength, yield strength and microhardness of the composite added with 0.3 wt% GO are 9%, 15% and 27% higher than the matrix titanium alloy without GO, respectively, and the tensile strength and yield strength at 600 °C are 3% and 21% higher than the matrix alloy. The quantitative analysis indicates that the main strengthening mechanisms are load transfer strengthening, grain refinement and (TiZr)6Si3 second phase strengthening, which accounted for 48%, 30% and 16% of the improvement of room-temperature yield strength, respectively.

scholarly journals Study on Dynamic Mechanical Properties and Constitutive Model Construction of TC18 Titanium Alloy

Metals ◽  
2019 ◽  
Vol 10 (1) ◽  
pp. 44 ◽  
Author(s):  
Changming Zhang ◽  
Anle Mu ◽  
Yun Wang ◽  
Hui Zhang
Keyword(s):  
Mechanical Properties ◽  
Titanium Alloy ◽  
Flow Stress ◽  
Yield Strength ◽  
Constitutive Model ◽  
Testing Machine ◽  
Dynamic Mechanical Properties ◽  
Stress Strain ◽  
Dynamic Mechanical ◽  
Different Temperatures

In order to investigate the static and dynamic mechanical properties of TC18 titanium alloy, the quasi-static stress–strain curve of TC18 titanium alloy under room temperature was obtained by DNS 100 electronic universal testing machine (Changchun Institute of Mechanical Science Co., Ltd., Changchun, China). Meanwhile, the flow stress–strain curves under different temperatures and strain rates are analyzed by split Hopkinson pressure bar (SHPB) device with synchronous assembly system. On the basis of the two experimental data, the JC constitutive model under the combined action of high temperature and impact load is established using the linear least squares method. The results show the following: the yield strength and flow stress of TC18 titanium alloy increase slowly with the increase of the strain rate, and the strain value corresponding to the yield strength is reduced. With the increase of strain, the flow stress increases at first and then decreases at different temperatures. The strain value corresponding to the transition point rises with the temperature increase, and the corresponding stress value remains basically unchanged. With the increase of experimental temperature, the flow stress shows a downward trend, and the JC constitutive model can predict the plastic flow stress well.

Effect of Hydrogen Content on Structure and Properties of Sintering Body Utilizing TC21 Hydrogenated Powder

2012 ◽  
Vol 581-582 ◽  
pp. 777-781
Author(s):  
Ya Qiang Tian ◽  
Ying Li Wei ◽  
Hong Liang Hou ◽  
Xue Ping Ren
Keyword(s):  
Mechanical Property ◽  
Grain Size ◽  
Titanium Alloy ◽  
Yield Strength ◽  
Hydrogen Content ◽  
Room Temperature ◽  
Sintered Body ◽  
Compressive Yield Strength ◽  
Structure And Properties ◽  
Die Forming

The effect of hydrogenation on structure and properties of TC21 alloy by die forming and sintering using hydrogenated powder was researched by means of the room-temperature die forming and sintering in protection air to produce titanium alloy. The results show that the structure of TC21 titanium sintered body using hydrogenated powder with hydrogen content of 0.39 wt% by die forming and sintering is thinner and the density is higher than the others. The compression strength and compressive yield strength of TC21 sintered body with hydrogen content of 0.39 wt% are well. With hydrogen content increasing, the structure of TC21 production using hydrogenated powder by die forming and sintering gets well and the grain size becomes smaller. After annealing, the structure of TC21 titanium production gets more uniformity and refinement obviously, and the hydrogen content of TC21 alloy safety state is achieved. In the end, the density and mechanical property of TC21 titanium alloy sintered body with hydrogen content of 0.39wt % is the best.

scholarly journals Open Porous α + β Titanium Alloy by Liquid Metal Dealloying for Biomedical Applications

Metals ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 1450 ◽  
Author(s):  
Stefan Alexander Berger ◽  
Ilya Vladimirovich Okulov
Keyword(s):  
Titanium Alloy ◽  
Elastic Modulus ◽  
Liquid Metal ◽  
Yield Strength ◽  
Biomedical Applications ◽  
High Yield ◽  
High Yield Strength ◽  
Open Porous Structure ◽  
Micrometer Scale ◽  
High Deformability

Open porous dendrite-reinforced TiMo alloy was synthesized by liquid metal dealloying of the precursor Ti47.5Mo2.5Cu50 (at.%) alloy in liquid magnesium (Mg). The porous TiMo alloy consists of α-titanium and β-titanium phases and possesses a complex microstructure. The microstructure consists of micrometer scale β-titanium dendrites surrounded by submicrometer scale α-titanium ligaments. Due to the dendrite-reinforced microstructure, the porous TiMo alloy possesses relatively high yield strength value of up to 180 MPa combined with high deformability probed under compression loading. At the same time, the elastic modulus of the porous TiMo alloy (below 10 GPa) is in the range of that found for human bone. This mechanical behavior along with the open porous structure is attractive for biomedical applications and suggests opportunities for using the porous TiMo alloy in implant applications.

Sign in / Sign up

Export Citation Format

Share Document