Exhaust Emissions of a DI Diesel Engine Fueled with Blends of Biodiesel and Low Sulfur Diesel Fuel

1997 ◽  
Author(s):  
Yukio Akasaka ◽  
Teruo Suzuki ◽  
Yoshihito Sakurai
Keyword(s):  
Diesel Engine ◽  
Diesel Fuel ◽  
Exhaust Emissions ◽  
Di Diesel Engine ◽  
Low Sulfur

Investigation on Di-(2-Methoxypropyl) Carbonate Used as a Clean Oxygenated Fuel for Diesel Engine

2017 ◽  
Vol 140 (1) ◽  
Author(s):  
Zhengxi Guo ◽  
Hejun Guo ◽  
Qingping Zeng
Keyword(s):  
Diesel Engine ◽  
Diesel Fuel ◽  
Analytical Techniques ◽  
Exhaust Emissions ◽  
Monomethyl Ether ◽  
Smoke Point ◽  
Structure Characterization ◽  
Delay Duration ◽  
Oxygenated Fuel ◽  
Di Diesel Engine

Utilization of oxygenated fuels has proven to be able to significantly control diesel engine exhaust emissions. Presented in this paper is a new oxygenated fuel di-(2-methoxypropyl) carbonate (DMPC), which was produced through transesterification reaction using dimethyl carbonate (DMC) and propylene glycol monomethyl ether (PGMME) as reactants as well as potassium hydroxide (KOH) as catalyst. Its structure characterization was completed through analyses with Fourier transform infrared (FT-IR), 1H nuclear magnetic resonance (NMR), and GC-MS analytical techniques. Further study was made about the effect of the oxygenate addition to diesel fuel on chemicophysical properties, combustion performances, and exhaust emissions characteristics. Experimental results displayed that the oxygenated fuel is mutually soluble with diesel fuel in any proportion at ambient temperature around 25 °C. With DMPC introduced to diesel fuel, kinematic viscosity decreases linearly, smoke point increases linearly, and flash point declines remarkably even under low content 5 vol %. Results of combustion test carried out on a single cylinder, DI diesel engine running at 1600 rpm and 2000 rpm showed that CO can be reduced by up to 60.0%, smoke can be lessened by up to 90.2%, while NOx increases by 4.4–14.0% as 15 vol % and 25 vol % of the oxygenate was added to a diesel fuel. Engine in-cylinder peak pressure increases somewhat and ignition delay duration becomes a little shorter. Both engine in-cylinder pressure rising rate and heat release rate increase noticeably during the premixed combustion.

Effects of ethanol–diesel fuel blends on the performance and exhaust emissions of heavy duty DI diesel engine

2008 ◽  
Vol 49 (11) ◽  
pp. 3155-3162 ◽  
Author(s):  
D.C. Rakopoulos ◽  
C.D. Rakopoulos ◽  
E.C. Kakaras ◽  
E.G. Giakoumis
Keyword(s):  
Diesel Engine ◽  
Diesel Fuel ◽  
Exhaust Emissions ◽  
Heavy Duty ◽  
Fuel Blends ◽  
Di Diesel Engine

Explorative Investigation on Cashew Nut Shell Liquid Biodiesel blended with Ethanol and Hydrogen in Direct Injection (DI) Diesel Engine and prediction through Artificial Neural Network

2021 ◽  
Author(s):  
Thanigaivelan V ◽  
Lavanya R
Keyword(s):  
Diesel Engine ◽  
Diesel Fuel ◽  
Direct Injection ◽  
Cashew Nut Shell Liquid ◽  
Single Cylinder ◽  
Direct Injection Diesel Engine ◽  
Cashew Nut ◽  
Di Diesel Engine ◽  
Artificial Neural ◽  
Cashew Nut Shell

Abstract Emission from the DI diesel engine is series setback for environment viewpoint. Intended for that investigates for alternative biofuel is persuaded. The important hitches with the utilization of biofuels and their blends in DI diesel engines are higher emanations and inferior brake-thermal efficiency as associated to sole diesel fuel. In this effort, Cashew nut shell liquid (CNSL) biodiesel, hydrogen and ethanol (BHE) mixtures remained verified in a direct-injection diesel engine with single cylinder to examine the performance and discharge features of the engine. The ethanol remained supplemented 5%, 10% and 15% correspondingly through enhanced CNSL as well as hydrogen functioned twin fuel engine. The experiments done in a direct injection diesel engine with single-cylinder at steadystate conditions above the persistent RPM (1500RPM). Throughout the experiment, emissions of pollutants such as fuel consumption rate (SFC), hydrocarbons (HC), carbon monoxide (CO), nitrogen oxides (NOx) and pressure of the fuel were also measured. cylinders. The experimental results show that, compared to diesel fuel, the braking heat of the biodiesel mixture is reduced by 26.79-24% and the BSFC diminutions with growing addition of ethanol from the CNSL hydrogen mixture. The BTE upsurges thru a rise in ethanol proportion with CNSL hydrogen mixtures. Finally, the optimum combination of ethanol with CNSL hydrogen blends led to the reduced levels of HC and CO emissions with trivial upsurge in exhaust gas temperature and NOx emissions. This paper reconnoiters the routine of artificial neural networks (ANN) to envisage recital, ignition and discharges effect.

scholarly journals THE EFFECT OF DIESEL-BIODIESEL BLENDS ON THE PERFORMANCE AND EXHAUST EMISSIONS OF A DIRECT INJECTION OFF-ROAD DIESEL ENGINE

Transport ◽  
2014 ◽  
Vol 29 (4) ◽  
pp. 440-448 ◽  
Author(s):  
Tomas Mickevičius ◽  
Stasys Slavinskas ◽  
Slawomir Wierzbicki ◽  
Kamil Duda
Keyword(s):  
Diesel Engine ◽  
Diesel Fuel ◽  
Direct Injection ◽  
Engine Performance ◽  
Exhaust Emissions ◽  
Bench Test ◽  
Maximum Pressure ◽  
Cylinder Pressure ◽  
Biodiesel Blends ◽  
Performance And Emission

This paper presents a comparative analysis of the diesel engine performance and emission characteristics, when operating on diesel fuel and various diesel-biodiesel (B10, B20, B40, B60) blends, at various loads and engine speeds. The experimental tests were performed on a four-stroke, four-cylinder, direct injection, naturally aspirated, 60 kW diesel engine D-243. The in-cylinder pressure data was analysed to determine the ignition delay, the Heat Release Rate (HRR), maximum in-cylinder pressure and maximum pressure gradients. The influence of diesel-biodiesel blends on the Brake Specific Fuel Consumption (bsfc) and exhaust emissions was also investigated. The bench test results showed that when the engine running on blends B60 at full engine load and rated speed, the autoignition delay was 13.5% longer, in comparison with mineral diesel. Maximum cylinder pressure decreased about 1–2% when the amount of Rapeseed Methyl Ester (RME) expanded in the diesel fuel when operating at full load and 1400 min–1 speed. At rated mode, the minimum bsfc increased, when operating on biofuel blends compared to mineral diesel. The maximum brake thermal efficiency sustained at the levels from 0.3% to 6.5% lower in comparison with mineral diesel operating at full (100%) load. When the engine was running at maximum torque mode using diesel – RME fuel blends B10, B20, B40 and B60 the total emissions of nitrogen oxides decreased. At full and moderate load, the emission of carbon monoxide significantly raised as the amount of RME in fuel increased.

Sign in / Sign up

Export Citation Format

Share Document