A practical example for the implantation of CAD systems.

1993 ◽  
Author(s):  
Demétrio Elie Baracat
Keyword(s):  
Cad Systems

Analysing Mechanical Systems in Domestic and Foreign CAD Systems

2018 ◽  
pp. 10-17
Author(s):  
V. A. Martynyuk ◽  
V. A. Trudonoshin ◽  
V. G. Fedoruk
Keyword(s):  
Sheet Material ◽  
The Finite Element Method ◽  
Cad Systems ◽  
Cad System ◽  
Software Products ◽  
Foreign Products ◽  
Nonlinear Algebraic Systems ◽  
Software Product ◽  
Pipeline Design ◽  
The Mathematical Model

The article considers applications of foreign CAD-systems in creating the challenging projects at domestic enterprises and design bureaus. As stated in the article "... presently, there is no domestic CAD-system that could completely replace such foreign products as NX, CATIA, Credo". Besides, due to international cooperation in creating the challenging projects (for example, the project to create a modern wide-body aircraft, proposed jointly with China), it makes sense to use the worldwide known and popular CAD systems (the aforementioned NX, CATIA, Credo). Therefore, in the foreseeable future, we will still have to use foreign software products. Of course, there always remains a question of the reliability of the results obtained. Actually, this question is always open regardless of what software product is used - domestic or foreign. This question has been haunting both developers and users of CAD systems for the last 30 to 40 years. But with using domestic systems, it is much easier to identify the cause of inaccurate results and correct the mathematical models used, the methods of numerical integration applied, and the solution of systems of nonlinear algebraic systems. Everything is much more complicated if we use a foreign software product. All advertising conversations that there is a tool to make the detected errors available to the developers, remain only conversations in the real world. It is easily understandable to domestic users, and, especially, to domestic developers of similar software products. The existing development rates and competition for potential buyers dictate a rigid framework of deadlines for releasing all new versions of the product and introducing the latest developments into commercial product, etc. As a result, the known errors migrate from version to version, and many users have accepted it long ago. Especially, this concerns the less popular tools rather than the most popular applications (modules) of a CAD system. For example, in CAD systems, the "Modeling" module where geometric models of designed parts and assembly units are created has been repeatedly crosschecked. But most of the errors are hidden in applications related to the design of parts from sheet material and to the pipeline design, as well as in applications related to the analysis of moving mechanisms and to the strength or gas dynamic analysis by the finite element method.The article gives a concrete example of a moving mechanism in the analysis of which an error was detected using the mathematical model of external influence (a source of speed) in the NX 10.0 system of Siemens.

THE NEW ALGORITHM OF SOLVING HARMONIC BALANCE EQUATIONS

2019 ◽  
Author(s):  
Vladimir Lantsov ◽  
A. Papulina
Keyword(s):  
Harmonic Balance ◽  
Model Order Reduction ◽  
Order Reduction ◽  
Balance Equations ◽  
Model Order ◽  
Cad Systems ◽  
Computational Costs ◽  
Reduction Methods ◽  
Model Equations

The new algorithm of solving harmonic balance equations which used in electronic CAD systems is presented. The new algorithm is based on implementation to harmonic balance equations the ideas of model order reduction methods. This algorithm allows significantly reduce the size of memory for storing of model equations and reduce of computational costs.

ТИРИСТОРНЫЙ ЭФФЕКТ В СВЧ ИС, ИЗГОТОВЛЕННЫХ ПО SIGE БИКМОП-ТЕХНОЛОГИЯМ

2020 ◽  
Vol 96 (3s) ◽  
pp. 612-614
Author(s):  
В.В. Елесина ◽  
И.О. Метелкин
Keyword(s):  
Integrated Circuits ◽  
Extraction Procedure ◽  
Compact Model ◽  
Model Parameters ◽  
Cad Systems ◽  
Parameters Extraction ◽  
Sige Bicmos ◽  
Bicmos Integrated Circuits ◽  
Basic Parameters ◽  
Radiation Induced

Проведен анализ случаев возникновения тиристорного эффекта в СВЧ ИС, изготовленных по технологии SiGe БиКМОП, при воздействии ионизирующего излучения. Рассмотрены области СВЧ ИС, чувствительные к возникновению ТЭ, определены основные параметры тиристорных структур. Проведена апробация подхода к восстановлению параметров схемно-топологической радиационно-ориентированной модели тиристорной структуры для САПР. The paper analyzes ionizing radiation induced latchup in microwave SiGe BiCMOS integrated circuits (ICs). Critical parts of ICs sensitive to latchup have been identified and basic parameters of corresponding parasitic thyristor structures have been determined. An approach has been approved to the thyristor structure compact model parameters extraction procedure intended for use in CAD systems.

Combinatorial Optimization of CAD Systems

2021 ◽  
Author(s):  
Volodymyr Riznyk ◽  
Oleg Riznyk ◽  
Mykhailo Solomko ◽  
Yuriy Tsymbal ◽  
Daniel Skrybailo-Leskiv ◽  
...  
Keyword(s):  
Combinatorial Optimization ◽  
Cad Systems

Fully Free-Form Deformation Features (δ-F4) Incorporating Discontinuities

2004 ◽  
Author(s):  
Vincent Cheutet ◽  
Jean-Philippe Pernot ◽  
Jean-Claude Leon ◽  
Bianca Falcidieno ◽  
Franca Giannini
Keyword(s):  
Surface Deformation ◽  
Geometric Constraints ◽  
Free Form ◽  
Initial Surface ◽  
Cad Systems ◽  
Free Form Deformation ◽  
Deformation Features ◽  
Generate Surface ◽  
Prototype Software ◽  
Free Form Surfaces

To limit low-level manipulations of free-form surfaces, the concept of Fully Free Form Deformation Features (δ-F4) have been introduced. They correspond to shapes obtained by deformation of a surface area according to specified geometric constraints. In our work, we mainly focused on those features aimed at enforcing the visual effect of the so-called character lines, extensively used by designers to specify the shape of an object. Therefore, in the proposed approach, 3D lines are used to drive surface deformation over specified areas. Depending on the wished shape and reflection light effects, the insertion of character lines may generate surface tangency discontinuities. In CAD systems, such kind of discontinuities is generally created by a decomposition of the initial surface into several patches. This process can be tedious and very complex, depending on the shape of the deformation area and the desired surface continuity. Here, a method is proposed to create discontinuities on a surface, using the trimming properties of surfaces. The corresponding deformation features produce the resulting surface in a single modification step and handle simultaneously more constraints than current CAD systems. The principle of the proposed approach is based on arbitrary shaped discontinuities in the parameter domain of the surface to allow the surface exhibiting geometric discontinuities at user-prescribed points or along lines. The proposed approach is illustrated with examples obtained using our prototype software.

Feature-Based Design: 4 Hypotheses for Future CAD Systems

1993 ◽  
Author(s):  
David W. Rosen
Keyword(s):  
Future Research ◽  
Design Activity ◽  
Research Directions ◽  
Research Issues ◽  
Cad Systems ◽  
Feature Representations ◽  
Feature Based ◽  
Computer Based ◽  
Definition Of ◽  
Feature Based Design

Abstract Features are meaningful abstractions of geometry that engineers use to reason about components, products, and processes. For design activity, features are design primitives, serve as the basis for product representations, and can incorporate information relevant to life-cycle activities such as manufacturing. Research on feature-based design has matured to the point that results are being incorporated into commercial CAD systems. The intent here is to classify feature-based design literature to provide a solid historical basis for present research and to identify promising research directions that will affect computer-based design tools within the next few years. Applications of feature-based design and technologies of feature representations are reviewed. Open research issues are identified and put in the context of past and current work. Four hypotheses are proposed as challenges for future research: two on the existence of fundamental sub-feature elements and relationships for features, one that presents a new definition of design features, and one that argues for the successful development of concurrent engineering languages. Evidence for these hypotheses is provided from recent research results and from speculation about the future of feature-based design.

Sign in / Sign up

Export Citation Format

Share Document