Design Considerations for the Use of Composite Materials in Intake Manifolds and Fuel Rails

1992 ◽  
Author(s):  
John G. Schramm
Keyword(s):  
Composite Materials ◽  
Design Considerations

scholarly journals Alternative Composite Materials for Megawatt-Scale Wind Turbine Blades: Design Considerations and Recommended Testing

2003 ◽  
Author(s):  
Dayton A. Griffin ◽  
Thomas D. Ashwill
Keyword(s):  
Composite Materials ◽  
Turbine Blades ◽  
Cost Effective ◽  
Scaling Up ◽  
Structural Performance ◽  
Manufacturing Processes ◽  
Wind Turbine Blades ◽  
Design Considerations ◽  
Structural Configurations ◽  
Hybrid Carbon

As part of the U.S. Department of Energy’s Wind Partnerships for Advanced Component Technologies program, Global Energy Concepts LLC (GEC) is performing a study concerning blades for wind turbines in the multi-megawatt range. Earlier in this project constraints were identified to cost-effective scaling-up of the current commercial blade designs and manufacturing methods, and candidate innovations in composite materials, manufacturing processes and structural configurations were assessed. In the present work, preliminary structural designs are developed for hybrid carbon fiber/fiberglass blades at system ratings of 3.0 and 5.0 megawatts. Structural performance is evaluated for various arrangements of the carbon blade spar. Critical performance aspects of the carbon material and blade structure are discussed. To address the technical uncertainties identified, recommendations are made for new testing of composite coupons and blade sub-structure.

scholarly journals Alternative Composite Materials for Megawatt-Scale Wind Turbine Blades: Design Considerations and Recommended Testing

2003 ◽  
Vol 125 (4) ◽  
pp. 515-521 ◽  
Author(s):  
Dayton A. Griffin ◽  
Thomas D. Ashwill
Keyword(s):  
Composite Materials ◽  
Turbine Blades ◽  
Cost Effective ◽  
Scaling Up ◽  
Structural Performance ◽  
Manufacturing Processes ◽  
Wind Turbine Blades ◽  
Design Considerations ◽  
Structural Configurations ◽  
Hybrid Carbon

As part of the U.S. Department of Energy’s Wind Partnerships for Advanced Component Technologies program, Global Energy Concepts LLC (GEC) is performing a study concerning blades for wind turbines in the multi-megawatt range. Earlier in this project constraints to cost-effective scaling-up of the current commercial blade designs and manufacturing methods were identified, and candidate innovations in composite materials, manufacturing processes and structural configurations were assessed. In the present work, preliminary structural designs are developed for hybrid carbon fiber/fiberglass blades at system ratings of 3.0 and 5.0 MW. Structural performance is evaluated for various arrangements of the carbon blade spar, and critical performance aspects of the carbon material and blade structure are discussed. Recommendations are made for new testing of composite coupons and blade sub-structure to address the technical uncertainties identified in this work.

Comparative Microstructures of Ion Milled and Electrochemically Thinned Composite Materials

1974 ◽  
Vol 32 ◽  
pp. 546-547
Author(s):  
R.R. Russell
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Composite Materials ◽  
Great Difficulty ◽  
Ion Milling ◽  
Transmission Electron ◽  
Ion Damage ◽  
Intermetallic Composite

Transmission electron microscopy of metallic/intermetallic composite materials is most challenging since the microscopist typically has great difficulty preparing specimens with uniform electron thin areas in adjacent phases. The application of ion milling for thinning foils from such materials has been quite effective. Although composite specimens prepared by ion milling have yielded much microstructural information, this technique has some inherent drawbacks such as the possible generation of ion damage near sample surfaces.

Transmission electron microscopy of composite materials

1988 ◽  
Vol 46 ◽  
pp. 1012-1015
Author(s):  
K.P.D. Lagerlof
Keyword(s):  
Composite Materials ◽  
Physical Properties ◽  
Structural Defects ◽  
Structural Composites ◽  
Multiphase Materials ◽  
Structural Reinforcement ◽  
Transmission Electron ◽  
Reinforced Fiber ◽  
Particulate Reinforced Composites ◽  
Definition Of

Although most materials contain more than one phase, and thus are multiphase materials, the definition of composite materials is commonly used to describe those materials containing more than one phase deliberately added to obtain certain desired physical properties. Composite materials are often classified according to their application, i.e. structural composites and electronic composites, but may also be classified according to the type of compounds making up the composite, i.e. metal/ceramic, ceramic/ceramie and metal/semiconductor composites. For structural composites it is also common to refer to the type of structural reinforcement; whisker-reinforced, fiber-reinforced, or particulate reinforced composites [1-4].For all types of composite materials, it is of fundamental importance to understand the relationship between the microstructure and the observed physical properties, and it is therefore vital to properly characterize the microstructure. The interfaces separating the different phases comprising the composite are of particular interest to understand. In structural composites the interface is often the weakest part, where fracture will nucleate, and in electronic composites structural defects at or near the interface will affect the critical electronic properties.

Morphological behavior of compatibilized ternary blends prepared by mechanical mixing

1993 ◽  
Vol 51 ◽  
pp. 1200-1201
Author(s):  
S.D. Smith ◽  
R.J. Spontak ◽  
D.H. Melik ◽  
S.M. Buehler ◽  
K.M. Kerr ◽  
...  
Keyword(s):  
Interfacial Adhesion ◽  
Diblock Copolymers ◽  
Ternary Blends ◽  
Mechanical Mixing ◽  
Design Considerations ◽  
Covalently Bonded ◽  
Homopolymer Blends ◽  
Emulsifying Agent ◽  
Surface Active ◽  
Low Entropy

When blended together, homopolymers A and B will normally macrophase-separate into relatively large (≫1 μm) A-rich and B-rich phases, between which exists poor interfacial adhesion, due to a low entropy of mixing. The size scale of phase separation in such a blend can be reduced, and the extent of interfacial A-B contact and entanglement enhanced, via addition of an emulsifying agent such as an AB diblock copolymer. Diblock copolymers consist of a long sequence of A monomers covalently bonded to a long sequence of B monomers. These materials are surface-active and decrease interfacial tension between immiscible phases much in the same way as do small-molecule surfactants. Previous studies have clearly demonstrated the utility of block copolymers in compatibilizing homopolymer blends and enhancing blend properties such as fracture toughness. It is now recognized that optimization of emulsified ternary blends relies upon design considerations such as sufficient block penetration into a macrophase (to avoid block slip) and prevention of a copolymer multilayer at the A-B interface (to avoid intralayer failure).

Theoretical And Practical Design Considerations for Ultra-High Resolution Electron Lenses

1980 ◽  
Vol 38 ◽  
pp. 266-269
Author(s):  
Y. Harada ◽  
K. Tsuno ◽  
Y. Arai
Keyword(s):  
Optical Properties ◽  
High Resolution ◽  
Chromatic Aberration ◽  
Point Of View ◽  
Pole Piece ◽  
Axial Field ◽  
Design Considerations ◽  
Resolution Electron ◽  
Practical Design ◽  
Peak Flux

Magnetic objective lenses, from the point of view of pole piece geometry, can he roughly classified into two types, viz., symmetrical and asymmetrical. In the case of the former, the optical properties have been calculated by several authors1-3) and the results would appear to suggest that, in order to reduce the spherical and chromatic aberration coefficients, Cs and Cc, it is necessary to decrease the half-width value of the axial field distribution and to increase the peak flux density. The expressions for either minimum Cs or minimum Cc were presented in the form of ‘universal’ curves by Mulvey and Wallington4).

Sign in / Sign up

Export Citation Format

Share Document