Effect of Engine Operating Parameters on Engine Combustion Chamber Deposits

1990 ◽  
Author(s):  
Shi-wai S. Cheng ◽  
Changsoo Kim
Keyword(s):  
Combustion Chamber ◽  
Operating Parameters ◽  
Engine Combustion ◽  
Combustion Chamber Deposits

scholarly journals RESEARCH ON CHARACTERISTICS OF TURBO JET ENGINE COMBUSTION CHAMBER

Aviation ◽  
2021 ◽  
Vol 25 (1) ◽  
pp. 65-72
Author(s):  
Andrius Dubovas ◽  
Domantas Bručas
Keyword(s):  
Combustion Chamber ◽  
Computer Simulations ◽  
Operating Parameters ◽  
Exhaust Gas ◽  
Jet Engines ◽  
Gas Temperature ◽  
Jet Engine ◽  
Engine Combustion ◽  
Exhaust Gas Temperature ◽  
Combustion Mixture

The characteristics of the combustion chamber of turbo jet engine with various parameters are examined in this article. The scientific works of other authors analyzing operating parameters of the jet engines were reviewed. Their recommendations were considered. Computer simulations of the combustion chamber were performed using different combustion reactions. The exhaust gas temperature and its dependence on the combustion mixture were determined. A practical study was also carried out, during which the experimental exhaust gas temperature was measured, and the trends of temperature change were determined. After analyzing both theoretical and practical results, the conclusions are presented.

Prediction of gaseous pollutant emissions from a spark-ignition direct-injection engine with gas-exchange simulation

2021 ◽  
pp. 146808742110050
Author(s):  
Stefania Esposito ◽  
Lutz Diekhoff ◽  
Stefan Pischinger
Keyword(s):  
Gas Exchange ◽  
Combustion Chamber ◽  
Direct Injection ◽  
Spark Ignition ◽  
Operating Conditions ◽  
Pollutant Emissions ◽  
Operating Parameters ◽  
Gaseous Pollutant ◽  
Fuel Ratio ◽  
No Emissions

With the further tightening of emission regulations and the introduction of real driving emission tests (RDE), the simulative prediction of emissions is becoming increasingly important for the development of future low-emission internal combustion engines. In this context, gas-exchange simulation can be used as a powerful tool for the evaluation of new design concepts. However, the simplified description of the combustion chamber can make the prediction of complex in-cylinder phenomena like emission formation quite challenging. The present work focuses on the prediction of gaseous pollutants from a spark-ignition (SI) direct injection (DI) engine with 1D–0D gas-exchange simulations. The accuracy of the simulative prediction regarding gaseous pollutant emissions is assessed based on the comparison with measurement data obtained with a research single cylinder engine (SCE). Multiple variations of engine operating parameters – for example, load, speed, air-to-fuel ratio, valve timing – are taken into account to verify the predictivity of the simulation toward changing engine operating conditions. Regarding the unburned hydrocarbon (HC) emissions, phenomenological models are used to estimate the contribution of the piston top-land crevice as well as flame wall-quenching and oil-film fuel adsorption-desorption mechanisms. Regarding CO and NO emissions, multiple approaches to describe the burned zone kinetics in combination with a two-zone 0D combustion chamber model are evaluated. In particular, calculations with reduced reaction kinetics are compared with simplified kinetic descriptions. At engine warm operation, the HC models show an accuracy mainly within 20%. The predictions for the NO emissions follow the trend of the measurements with changing engine operating parameters and all modeled results are mainly within ±20%. Regarding CO emissions, the simplified kinetic models are not capable to predict CO at stoichiometric conditions with errors below 30%. With the usage of a reduced kinetic mechanism, a better prediction capability of CO at stoichiometric air-to-fuel ratio could be achieved.

Sign in / Sign up

Export Citation Format

Share Document