Prediction of Power Output Performance of the Rotary Engine by Gas Exchange Process Simulation

1990 ◽  
Author(s):  
Toshihiko Osumi ◽  
Koji Onishi ◽  
Hidetoshi Nobumoto ◽  
Kazutoyo Watanabe ◽  
Junichi Funamoto
Keyword(s):  
Gas Exchange ◽  
Power Output ◽  
Process Simulation ◽  
Exchange Process ◽  
Rotary Engine ◽  
Output Performance ◽  
Gas Exchange Process

Experimental research on scavenging process of opposed-piston two-stroke gasoline engine based on tracer gas method

2021 ◽  
pp. 146808742110366
Author(s):  
Fukang Ma ◽  
Wei Yang ◽  
Yifang Wang ◽  
Junfeng Xu ◽  
Yufeng Li
Keyword(s):  
Gas Exchange ◽  
Exchange Process ◽  
Delivery Ratio ◽  
Tracer Gas ◽  
Piston Motion ◽  
Trapped Air ◽  
Exchange Performance ◽  
Gdi Engine ◽  
Gas Exchange Process ◽  
Scavenging Efficiency

The scavenging process of two stroke engine includes free exhaust, scavenging, and post intake process, which clears the burned gas in cylinder and suctions the fresh air for next cycle. The gas exchange process of Opposed-Piston Two-Stroke (OP2S) engine with gasoline direct injection (GDI) engine is a uniflow scavenging method between intake port and exhaust port. In order to investigate the characteristics of the gas exchange process in OP2S-GDI engine, a specific tracer gas method (TGM) was developed and the experiments were carried out to analyze the gas exchange performance under different intake and exhaust conditions and opposed-piston movement rule. The results show that gas exchange performance and trapped gas mass are significantly influenced by intake pressure and exhaust pressure. And it has a positive effect on the scavenging efficiency and the trapped air mass. Scavenging efficiency and trapped air mass are almost independent of pressure drop when the delivery ratio exceeds 1.4. Consequently, the delivery ratio ranges from 0.5 to 1.4 is chosen to achieve an optimization of steady running and minimum pump loss. The opposed piston motion phase difference only affects the scavenging timing. Scavenging performance is mainly influenced by scavenging timing and scavenging duration. With the increased phase difference of piston motion, the scavenging efficiency and delivery ratio increased gradually, the trapping efficiency would increase first and decrease then and reaches its maximum at 14°CA.

scholarly journals Development and experimental validation of a real-time capable field programmable gate array–based gas exchange model for negative valve overlap

2018 ◽  
Vol 21 (3) ◽  
pp. 421-436 ◽  
Author(s):  
David Gordon ◽  
Christian Wouters ◽  
Maximilian Wick ◽  
Feihong Xia ◽  
Bastian Lehrheuer ◽  
...  
Keyword(s):  
Gas Exchange ◽  
Real Time ◽  
Field Programmable Gate Array ◽  
Homogeneous Charge Compression Ignition ◽  
Exchange Process ◽  
Compression Ignition ◽  
Field Programmable ◽  
Gate Array ◽  
Gas Exchange Process ◽  
Homogeneous Charge

Homogeneous charge compression ignition has the potential to significantly reduce NO x emissions, while maintaining a high fuel efficiency. Homogeneous charge compression ignition is characterized by compression-induced autoignition of a lean homogeneous air–fuel mixture. Combustion timing is highly dependent on the in-cylinder state including pressure, temperature and trapped mass. To control homogeneous charge compression ignition combustion, it is necessary to have an accurate representation of the gas exchange process. Currently, microprocessor-based engine control units require that the gas exchange process is linearized around a desired operating point to simplify the model for real-time implementation. This reduces the models’ ability to handle disturbances and limits the flexibility of the model. However, using a field programmable gate array, a detailed simulation of the physical gas exchange process can be implemented in real time. This paper outlines the process of converting physical governing equations to an offline zero-dimensional gas exchange model. The process used to convert this model to a field programmable gate array capable model is described. This model is experimentally validated using a single cylinder research engine with electromagnetic valves to record real-time field programmable gate array gas exchange results and comparing to the offline zero-dimensional physical model. The field programmable gate array model is able to accurately calculate the cylinder temperature and cylinder mass at 0.1 °CA intervals during the gas exchange process for a range of negative valve overlaps, boost conditions and engine speeds making the model useful for future real-time control applications.

Control-Oriented Gas Exchange Model for Diesel Engines Utilizing Variable Intake Valve Actuation

2014 ◽  
Vol 136 (6) ◽  
Author(s):  
Lyle Kocher ◽  
Ed Koeberlein ◽  
Karla Stricker ◽  
D. G. Van Alstine ◽  
Greg Shaver
Keyword(s):  
Gas Exchange ◽  
Diesel Engines ◽  
Exchange Process ◽  
Exhaust Gas ◽  
Intake Valve ◽  
Physically Based ◽  
Valve Position ◽  
Gas Exchange Process ◽  
And Control ◽  
Valve Actuation

Modeling and control of the gas exchange process in modern diesel engines is critical for the promotion and control of advanced combustion strategies. However, most modeling efforts to date use complex stand-alone simulation packages that are not easily integrated into, or amenable for the synthesis of, engine control systems. Simpler control-oriented models have been developed; however, in many cases, they do not directly capture the complete dynamic interaction of air handling system components and flows in multicylinder diesel engines with variable geometry turbocharging (VGT), high pressure exhaust gas recirculation (EGR), and flexible intake valve actuation. Flexibility in the valvetrain directly impacts the gas exchange process not only through the effect on volumetric efficiency but also through the combustion process and resulting exhaust gas enthalpy utilized to drive the turbomachinery. This paper describes a low-order, five state model of the air handling system for a multicylinder variable geometry turbocharged diesel engine with cooled EGR and flexible intake valve actuation, validated against 286 steady state and 62 transient engine operating points. The model utilizes engine speed, engine fueling, EGR valve position, VGT nozzle position, and intake valve closing (IVC) time as inputs to the model. The model outputs include calculation of the engine flows as well as the exhaust temperature exiting the cylinders. The gas exchange model captures the dynamic effects of the not only the standard air handling actuators (EGR valve position and VGT position) but also IVC timing, exercised over their useful operating ranges. The model's capabilities are enabled through the use of analytical functions to describe the performance of the turbocharger, eliminating the need to use look-up maps; a physically based control-oriented exhaust gas enthalpy submodel and a physically based volumetric efficiency submodel.

Sign in / Sign up

Export Citation Format

Share Document