Evaluation of Passenger Car Gasoline Engine Oils by JASO Test Procedures—Report by JASO Engine Oil Subcommittee

1987 ◽  
Author(s):  
T. Takano ◽  
K. Nakamura ◽  
K. Sakamoto
Keyword(s):  
Gasoline Engine ◽  
Engine Oil ◽  
Test Procedures ◽  
Passenger Car ◽  
Engine Oils

Engine Oils in the Field: A Comprehensive Chemical Assessment of Engine Oil Degradation in a Passenger Car

2019 ◽  
Vol 67 (3) ◽  
Author(s):  
Nicole Dörr ◽  
Adam Agocs ◽  
Charlotte Besser ◽  
Andjelka Ristić ◽  
Marcella Frauscher
Keyword(s):  
Engine Oil ◽  
Oil Degradation ◽  
Passenger Car ◽  
Engine Oils ◽  
Chemical Assessment

scholarly journals Analysis of selected results of engine oil tests

2019 ◽  
Vol 302 ◽  
pp. 01010
Author(s):  
Bogdan Landowski ◽  
Monika Baran
Keyword(s):  
Kinematic Viscosity ◽  
Viscosity Index ◽  
Engine Oil ◽  
Lubricating Oil ◽  
Drive Unit ◽  
Passenger Car ◽  
Engine Oils ◽  
Different Temperatures ◽  
Rotary Viscometer

The study presents selected results of viscosity tests performed for different temperatures of lubricating oil with viscosity marked as 5w30. Viscosity tests of new oil and oil right after being used have been compared. Lubricating oil used in a drive unit of a passenger car was tested. A vehicle in which oil had been changed irregularly was purposefully selected for the tests. Its mileage was over 15-20 thousand kilometers. Upon testing the vehicle mileage was above 265 thousand kilometers. The values of selected characteristics of the analyzed engine oils have been determined including: density, kinematic viscosity and viscosity index. FUNGILAB rotary viscometer was used for measurement of the oil kinematic viscosity.

Second Paper: Recent Studies on Rotary-Engine Lubrication

1974 ◽  
Vol 188 (1) ◽  
pp. 295-302
Author(s):  
J. Y. Breau ◽  
B. J. Miller ◽  
P. Möller ◽  
T. W. Rogers
Keyword(s):  
Film Thickness ◽  
Automatic Transmission ◽  
Engine Performance ◽  
Base Stock ◽  
Bench Test ◽  
Test Procedures ◽  
Passenger Car ◽  
Engine Oils ◽  
Rotary Engine ◽  
Engine Wear

Rotary-engine lubrication studies have been conducted on four engines covering the two types of rotary engine now in production. Metallic or carbon-metallic apex seals were used. Results presented have been obtained with 13 different oil formulations, including passenger-car-engine oils corresponding to API SC, SD or SE categories, automatic-transmission fluids of the Dexron II type, and oils for two-stroke engines. Seven different test procedures have been used in these investigations, employing either engine bench test stands or vehicles on chassis dynamometers. Satisfactory rotary-engine performance has been obtained with oils containing from 0 to 1·2 per cent by weight of sulphated ash. The ability of the base stock to provide good film thickness has also been found of benefit in reducing rotary-engine wear. Passenger-car-engine oils can be excellent rotary-engine lubricants and those oils corresponding to the latest API SE classification exhibit better performance than previous API SC or SD oils. Automatic-transmission fluids have also given promising results.

New Algorithm for Engine Oil Identification by Infrared Spectrum

2014 ◽  
Vol 1081 ◽  
pp. 353-357
Author(s):  
Yong Gang Shi ◽  
Hao Wen ◽  
Hai Feng Gong ◽  
Zi Cun Li ◽  
Bin Su ◽  
...  
Keyword(s):  
Infrared Spectrum ◽  
Ir Spectra ◽  
Quality Index ◽  
Experimental Results ◽  
Engine Oil ◽  
Evaluation Index ◽  
Weight Factor ◽  
Engine Oils ◽  
Composition Characteristics

Based on structure and composition characteristics of engine oil, the new algorithm for its Infrared Spectrum (IR) Identification has been put forward. The Hit Quality Index and Related Hit Quality Index are widely used in Infrared Spectrum Identification recently. The two methods don’t take the importance of the variables into consideration and cannot distinguish the unobvious variation in IR spectra. Therefore the diversity weight factor was introduced into the new algorithm to promote its selectivity. The experimental results had shown that the new spectrum similarity evaluation index could distinguish the unobvious spectrum variations and to improve the infrared spectrum identification capability of engine oils.

scholarly journals Study on the Prospects of Use the Group D Engine Oil in Locomotive Diesel Engines

2018 ◽  
Vol 7 (4.3) ◽  
pp. 47
Author(s):  
Andrii Кravets ◽  
Andrii Yеvtushenko ◽  
Andrii Pogrebnyak ◽  
Yevhenii Romanovych ◽  
Heorhii Afanasov
Keyword(s):  
Diesel Engines ◽  
Wear Test ◽  
Engine Oil ◽  
Test Machine ◽  
Group V ◽  
Engine Oils ◽  
Oil Fuel ◽  
Continuous Use ◽  
Group D ◽  
Locomotive Diesel

It was suggested to use group D engine oil with advanced properties instead of group V and G engine oils, which are used in locomotive diesel engines today, to improve the performance of the Ukrainian locomotive fleet of railways.A series of comparative laboratory studies of these oil groups was conducted to substantiate this suggestion which proved better lubrication and tribological performance of group D engine oil and allowed its performance tests.Tests conducted on diesel 5D49 for mileage of more then 100,000 km have demonstrated the advantages of group D oils, such as more stable viscosity, neutralizing ,washing and other properties. Studies on the four-ball wear test machine proved better anti-wear, anti-scoring and anti-friction properties of group D engine oil, which appear even after the continuous use of oils in locomotive diesels. Decrease in burning loss of engine oil was recorded, resulting in the decrease of oil fuel consumption for group D by 30-60% vs. the group G oil.According to the results of performance tests, group D engine oil has been recommended for the use in 5D49 locomotive diesels and some advice on its future implementation have been provided.  

Heat Transfer Properties of Engine Oils

2005 ◽  
Author(s):  
Scott Wrenick ◽  
Paul Sutor ◽  
Harold Pangilinan ◽  
Ernest E. Schwarz
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Diesel Engine ◽  
Specific Heat ◽  
Mineral Oil ◽  
Engine Oil ◽  
Group V ◽  
Engine Oils ◽  
Heat Transfer Fluids ◽  
Transfer Properties

The thermal properties of engine oil are important traits affecting the ability of the oil to transfer heat from the engine. The larger the thermal conductivity and specific heat, the more efficiently the oil will transfer heat. In this work, we measured the thermal conductivity and specific heat of a conventional mineral oil-based diesel engine lubricant and a Group V-based LHR diesel engine lubricant as a function of temperature. We also measured the specific heat of ethylene glycol. The measured values are compared with manufacturers’ data for typical heat transfer fluids. The Group V-based engine oil had a higher thermal conductivity and slightly lower specific heat than the mineral oil-based engine oil. Both engine oils had values comparable to high-temperature heat transfer fluids.

Assessing Efficiency Benefits of Low Viscosity Gasoline Engine Oils

2021 ◽  
Author(s):  
Sarita Seth ◽  
Swamy Maloth ◽  
Punit Kumar Singh ◽  
A S Ramadhas ◽  
Prashant Kumar ◽  
...  
Keyword(s):  
Gasoline Engine ◽  
Engine Oils ◽  
Low Viscosity
Sign in / Sign up

Export Citation Format

Share Document