Low Temperature Starting of Diesel Engines Using Timed Spark Discharge

1985 ◽  
Author(s):  
J. D. Dale ◽  
J. D. Wilson ◽  
J. Santiago ◽  
P. Smy ◽  
R. Clements
Keyword(s):  
Low Temperature ◽  
Diesel Engines ◽  
Spark Discharge

The Low-Temperature Starting And Operation of Diesel Engines

1951 ◽  
Author(s):  
A. W. Sloan ◽  
A. C. Scurlock ◽  
D. P. Hereon
Keyword(s):  
Low Temperature ◽  
Diesel Engines

A Comprehensive Review on Low-Temperature Combustion Technologies for Emission Reduction in Diesel Engines

2021 ◽  
Vol 18 (4) ◽  
Author(s):  
Amit Jhalani ◽  
Dilip Sharma ◽  
Pushpendra Kumar Sharma ◽  
Digambar Singh ◽  
Sumit Jhalani ◽  
...  
Keyword(s):  
Low Temperature ◽  
Diesel Engines ◽  
Alternative Fuels ◽  
Low Temperature Combustion ◽  
Compression Ignition ◽  
Lean Burn ◽  
Performance And Emissions ◽  
Temperature Combustion ◽  
Hc Emissions ◽  
Ci Engines

Diesel engines are lean burn engines; hence CO and HC emissions in the exhaust are less likely to occur in substantial amounts. The emissions of serious concern in compression ignition engines are particulate matter and nitrogen oxides because of elevated temperature conditions of combustion. Hence the researchers have strived continuously to lower down the temperature of combustion in order to bring down the emissions from CI engines. This has been tried through premixed charge compression ignition, homogeneous charge compression ignition (HCCI), gasoline compression ignition and reactivity controlled compression ignition (RCCI). In this study, an attempt has been made to critically review the literature on low-temperature combustion conditions using various conventional and alternative fuels. The problems and challenges augmented with the strategies have also been described. Water-in-diesel emulsion technology has been discussed in detail. Most of the authors agree over the positive outcomes of water-diesel emulsion for both performance and emissions simultaneously.

scholarly journals Research on Physico-Chemical Properties of Diethyl Ether/Linseed Oil Blends for the Use as Fuel in Diesel Engines

Energies ◽  
2020 ◽  
Vol 13 (24) ◽  
pp. 6564
Author(s):  
Krzysztof Górski ◽  
Ruslans Smigins ◽  
Rafał Longwic
Keyword(s):  
Surface Tension ◽  
Low Temperature ◽  
Diethyl Ether ◽  
Diesel Fuel ◽  
Diesel Engines ◽  
Kinematic Viscosity ◽  
Linseed Oil ◽  
Chemical Properties ◽  
Fuel Blends ◽  
Physico Chemical

Physico-chemical properties of diethyl ether/linseed oil (DEE/LO) fuel blends were empirically tested in this article for the first time. In particular, kinematic viscosity (ν), density (ρ), lower heating value (LHV), cold filter plugging point (CFPP) and surface tension (σ) were examined. For this research diethyl ether (DEE) was blended with linseed oil (LO) in volumetric ratios of 10%, 20% and 30%. Obtained results were compared with literature data of diethyl ether/rapeseed oil (DEE/RO) fuel blends get in previous research in such a way looking on differences also between oil types. It was found that DEE impacts significantly on the reduction of plant oil viscosity, density and surface tension and improve low temperature properties of tested oils. In particular, the addition of 10% DEE to LO effectively reduces its kinematic viscosity by 53% and even by 82% for the blend containing 30% DEE. Tested ether reduces density and surface tension of LO up to 6% and 25% respectively for the blends containing 30% DEE. The measurements of the CFPP showed that DEE significantly improves the low temperature properties of LO. In the case of the blend containing 30% DEE the CFPP can be lowered up to −24 °C. For this reason DEE/LO blends seem to be valuable as a fuel for diesel engines in the coldest season of the year. Moreover, DEE/LO blends have been tested in the engine research. Based on results it can be stated that the engine operated with LO results in worse performance compared with regular diesel fuel (DF). However, it was found that these disadvantages could be reduced with DEE as a component of the fuel mixture. Addition of this ether to LO improves the quality of obtained fuel blends. For this reason, the efficiency of DEE/LO blend combustion process is similar for the engine fuelled with regular diesel fuel. In this research it was confirmed that the smoke opacity reaches the highest value for the engine fuelled with plant oils. However, addition of 20% DEE reduces this emission to the value comparable for the engine operated with diesel fuel.

An assessment of low temperature NO adsorbers for cold-start NO control on diesel engines

2015 ◽  
Vol 258 ◽  
pp. 367-377 ◽  
Author(s):  
Joseph R. Theis ◽  
Christine K. Lambert
Keyword(s):  
Low Temperature ◽  
Diesel Engines ◽  
Cold Start

Low-temperature hydrogen desorption and the structural properties of spark discharge generated Mg nanoparticles

2011 ◽  
Vol 59 (8) ◽  
pp. 3070-3080 ◽  
Author(s):  
V.A. Vons ◽  
A. Anastasopol ◽  
W.J. Legerstee ◽  
F.M. Mulder ◽  
S.W.H. Eijt ◽  
...  
Keyword(s):  
Low Temperature ◽  
Structural Properties ◽  
Hydrogen Desorption ◽  
Spark Discharge
Sign in / Sign up

Export Citation Format

Share Document