Effects of Injection Timing and Exhaust Gas Recirculation on Emissions from a D.I. Diesel Engine

1981 ◽  
Author(s):  
Robert C. Yu ◽  
Syed M. Shahed
Keyword(s):  
Diesel Engine ◽  
Exhaust Gas Recirculation ◽  
Injection Timing ◽  
Exhaust Gas ◽  
Gas Recirculation

Control-Oriented Physics-Based NOX Emission Model for a Diesel Engine With Exhaust Gas Recirculation

2020 ◽  
Vol 1 (1) ◽  
Author(s):  
Saravanan Duraiarasan ◽  
Rasoul Salehi ◽  
Anna Stefanopoulou ◽  
Siddharth Mahesh ◽  
Marc Allain
Keyword(s):  
Diesel Engine ◽  
Test Procedure ◽  
Flame Temperature ◽  
Exhaust Gas Recirculation ◽  
Nox Emission ◽  
Injection Timing ◽  
Exhaust Gas ◽  
Engine Control ◽  
Gas Recirculation ◽  
The Impact

Abstract Stringent NOX emission norm for heavy duty vehicles motivates the use of predictive models to reduce emissions of diesel engines by coordinating engine parameters and aftertreatment. In this paper, a physics-based control-oriented NOX model is presented to estimate the feedgas NOX for a diesel engine. This cycle-averaged NOX model is able to capture the impact of all major diesel engine control variables including the fuel injection timing, injection pressure, and injection rate, as well as the effect of cylinder charge dilution and intake pressure on the emissions. The impact of the cylinder charge dilution controlled by the engine exhaust gas recirculation (EGR) in the highly diluted diesel engine of this work is modeled using an adiabatic flame temperature predictor. The model structure is developed such that it can be embedded in an engine control unit without any need for an in-cylinder pressure sensor. In addition, details of this physics-based NOX model are presented along with a step-by-step model parameter identification procedure and experimental validation at both steady-state and transient conditions. Over a complete federal test procedure (FTP) cycle, on a cumulative basis the model prediction was more than 93% accurate.

Effect of hydraulic flow rate, injection timing, and exhaust gas recirculation on particulate and gaseous emissions in a light-duty diesel engine

2019 ◽  
Vol 234 (5) ◽  
pp. 1279-1293 ◽  
Author(s):  
Khawar Mohiuddin ◽  
Minhoo Choi ◽  
Junkyu Park ◽  
Sungwook Park
Keyword(s):  
Diesel Engine ◽  
Flow Rate ◽  
Particle Number ◽  
Exhaust Gas Recirculation ◽  
Injection Timing ◽  
Exhaust Gas ◽  
Gaseous Emissions ◽  
Spray Tip Penetration ◽  
Hydraulic Flow ◽  
Gas Recirculation

Nozzle hydraulic flow rate is a critical parameter that affects the combustion process and plays a vital role in the production of emissions from a diesel engine. In this study, injection characteristics, such as normalized injection rate and spray tip penetration, were analyzed for different hydraulic flow rate injectors with the help of spray experiments. To further investigate the effects of hydraulic flow rate on engine-out particulate and gaseous emissions, engine experiments were performed for different values of hydraulic flow rate in multiple injectors. Various operating conditions and loading configurations were examined, and the effects of varying start of injection and exhaust gas recirculation rates for different hydraulic flow rates were analyzed. A separate Pegasor Particle Sensor (PPS-M) sensor was used to measure and collect data on the particle number, and an analysis was conducted to investigate the relation of particle number with hydraulic flow rate, injection timing, and exhaust gas recirculation rate. Results of the spray experiment exhibited a decreasing injection duration and increasing spray tip penetration with increasing hydraulic flow rate. Effect of hydraulic flow rate on combustion and emission characteristics were analyzed from engine experiment results. Least ignition delay was achieved using a smaller hole diameter, retarded injection timing, and lowest EGR%. Higher hydraulic flow rate with retarded injection timing and higher EGR% helped in reduction of NOx emissions and brake-specific fuel consumption, but particulate emissions were increased. Best particulate matter–NOx trade-off was achieved with lowest hydraulic flow rate.

Effect of exhaust gas recirculation and charge inlet temperature on performance, combustion, and emission characteristics of diesel engine with bael oil blends

2018 ◽  
Vol 29 (3) ◽  
pp. 372-391 ◽  
Author(s):  
M Krishnamoorthi ◽  
R Malayalamurthi
Keyword(s):  
Diesel Engine ◽  
Compression Ratio ◽  
Exhaust Gas Recirculation ◽  
Inlet Temperature ◽  
Injection Timing ◽  
Emission Characteristics ◽  
Exhaust Gas ◽  
Engine Operation ◽  
Engine Load ◽  
Gas Recirculation

The threat of fossil fuel depletion and augmented environmental pollution caused by diesel fleets can be curbed by adopting suitable fuel and engine modifications. In the present work, effects of engine speed (r/min), injection timing, injection pressure and compression ratio on performance and emission characteristics of a compression ignition engine were investigated. The ternary test fuel of 65% diesel + 25% bael oil + 10% diethyl ether has been used, where the tests have been conducted at different charge inlet temperature and exhaust gas recirculation. All the experiments were conducted at the trade-off engine load that is 75% engine load. When the diesel engine operating with 320 K charge inlet temperature, brake thermal efficiency has been improved to 28.6%. Meanwhile reduced emission levels of carbon monoxide (0.025%) and hydrocarbon (12.3 ppm) were observed during the engine operation with 320 K charge inlet temperature and compression ratio of 18:1. The oxides of nitrogen have been reduced to 226 ppm at 16:1 compression ratio with 30% exhaust gas recirculation mode.

Impacts of the exhaust gas recirculation (EGR) combined with the regeneration mode in a compression ignition diesel engine operating at cold conditions

2021 ◽  
pp. 146808742110139
Author(s):  
José Galindo ◽  
Vicente Dolz ◽  
Javier Monsalve-Serrano ◽  
Miguel Angel Bernal ◽  
Laurent Odillard
Keyword(s):  
High Pressure ◽  
Diesel Engine ◽  
Nitrogen Oxides ◽  
Internal Combustion Engines ◽  
Exhaust Gas Recirculation ◽  
Pollutant Emissions ◽  
Particulate Filter ◽  
Injection Timing ◽  
Exhaust Gas ◽  
Gas Recirculation

Internal combustion engines working at cold conditions lead to the production of excessive pollutant emissions levels. The use of the exhaust gas recirculation could be necessary to reduce the nitrogen oxides emissions, even at these conditions. This paper evaluates the impact of using the high-pressure exhaust gas recirculation strategy while the diesel particulate filter is under active regeneration mode on a Euro 6 turbocharged diesel engine running at low ambient temperature (−7°C). This strategy is evaluated under 40 h of operation, 20 of them using the two systems in combination. The results show that the activation of the high-pressure exhaust gas recirculation during the particulate filter regeneration process leads to a 50% nitrogen oxides emissions reduction with respect to a reference case without exhaust gas recirculation. Moreover, the modification of some engine parameters compared to the base calibration, as the exhaust gas recirculation rate, the main fuel injection timing and the post injection quantity, allows to optimize this strategy by reducing the carbon monoxide emissions up to 60%. Regarding the hydrocarbons emissions and fuel consumption, a small advantage could be observed using this strategy. However, the activation of the high-pressure exhaust gas recirculation at low temperatures can produce fouling deposits and condensation on the engine components (valve, cooler, intake manifold, etc.) and can contribute to reach saturation conditions on the particulate filter. For these reasons, the regeneration efficiency is followed during the experiments through the filter status, concluding that the use of low high-pressure exhaust gas recirculation rates in combination with the regeneration mode also allows to clean the soot particles of the particulate filter. These soot depositions are visualized and presented at the end of this work with a brief analysis of the soot characteristics and a quantitative estimation of the total soot volume produced during the experimental campaign.

Sign in / Sign up

Export Citation Format

Share Document