An Anti-Submarining Scale Determined from Theoretical and Experimental Studies Using Three-Dimensional Geometrical Definition of the Lap-Belt

1981 ◽  
Author(s):  
Y. C. Leung ◽  
C. Tarrière ◽  
A. Fayon ◽  
P. Mairesse ◽  
P. Banzet
Keyword(s):  
Experimental Studies ◽  
Three Dimensional ◽  
Definition Of

scholarly journals Empirical, Dimensional and Inspectional Analysis in the Design of Bottom Intake Racks

Water ◽  
2018 ◽  
Vol 10 (8) ◽  
pp. 1035 ◽  
Author(s):  
Juan García ◽  
Luis Castillo ◽  
José Carrillo ◽  
Patricia Haro
Keyword(s):  
Discharge Coefficient ◽  
Experimental Studies ◽  
Three Dimensional ◽  
Design Parameters ◽  
Incoming Flow ◽  
Viscous Forces ◽  
The Mean ◽  
Definition Of ◽  
New Formulation ◽  
Bottom Intake

Flow over bottom racks is highly turbulent, three-dimensional and spatially varied. The design of bottom intake systems has mainly been studied in the laboratory. The comparison of existing experimental studies shows large deviations in the definition of design parameters such as wetted rack length. Each experimental study is limited to a single bar type or to a low range of void ratios, which makes it difficult to generalize the observed data. A combination of empirical, dimensional and inspectional analysis is presented as a useful tool to reduce the number of variables with influence in the design parameters, such as the wetted rack length or the mean discharge coefficient. This work includes a broad experimental campaign in which wetted rack length and mean discharge coefficient are characterized using five different bottom racks with different void ratios (area between bars divided by total area). T-shaped flat and circular bars are considered as well as five different longitudinal slopes. Empirical and inspectional analyses have allowed us to verify, in two different ways, the relation between wetted rack length and incoming flow through potential functions. The influence of the viscous forces has been studied as a function of the incoming flow. Similar results may be obtained when analysing the Froude number at the beginning of the rack, depending on the wetted rack length. A new formulation for calculating the mean discharge coefficient and wetted rack length is proposed.

Application of high-resolution field-emission LVSEM, backscatter imaging, immunogold staining to definition of the spatial distributions of two human neutrophil adherence receptors

1993 ◽  
Vol 51 ◽  
pp. 36-37
Author(s):  
Robert D. Nelson ◽  
Sharon R. Hasslen ◽  
Stanley L. Erlandsen
Keyword(s):  
Cell Surface ◽  
Surface Membrane ◽  
Three Dimensional ◽  
Human Neutrophils ◽  
Spatial Distributions ◽  
Immunogold Staining ◽  
Functional Control ◽  
Neutrophil Adherence ◽  
Definition Of ◽  
Mode Of Attachment

Receptors are commonly defined in terms of number per cell, affinity for ligand, chemical structure, mode of attachment to the cell surface, and mechanism of signal transduction. We propose to show that knowledge of spatial distribution of receptors on the cell surface can provide additional clues to their function and components of functional control.L-selectin and Mac-1 denote two receptor populations on the neutrophil surface that mediate neutrophil-endothelial cell adherence interactions and provide for targeting of neutrophil recruitment to sites of inflammation. We have studied the spatial distributions of these receptors using LVSEM and backscatter imaging of isolated human neutrophils stained with mouse anti-receptor (primary) antibody and goat anti-mouse (secondary) antibody conjugated to 12 nm colloidal gold. This combination of techniques provides for three-dimensional analysis of the expression of these receptors on different surface membrane domains of the neutrophil: the ruffles and microvilli that project from the cell surface, and the cell body between these projecting structures.

The methodology of experimental research of the feed components extrusion process in order to improve its energy performance

2020 ◽  
pp. 147-152
Author(s):  
E. M. Ratnikov ◽  
D. O. Milko
Keyword(s):  
Experimental Studies ◽  
Energy Performance ◽  
Extrusion Process ◽  
Mathematical Methods ◽  
Screw Extruder ◽  
Mathematical Planning ◽  
Factors Affecting ◽  
Extrusion Processing ◽  
Definition Of

Annotation Purpose. Development of a program and methods for conducting experimental studies of the extrusion process with the definition of parameters and modes of operation of the extruder to improve its energy performance. Methods. Methods of mathematical statistics, synthesis, analysis, description and modeling were used. Results. The application of mathematical methods, in particular mathematical planning, reduces the number of experiments several times, and allows to evaluate the role of influencing factors, obtain a mathematical model of the process and determine the optimal conditions for its parameters and modes, etc. Conclusions. The methodology for experimental studies of a screw extruder is presented with the necessary equipment and methodology for processing the obtained experimental data. A mathematical method of planning, which reduces the number of experiments several times, allows us to evaluate the role of factors affecting productivity and energy intensity is presented. Keywords: extruder, auger, nutrients, research methodology, extrusion, processing, feed.

scholarly journals AB0677 REVISING THE DEFINITION OF REACTIVE ARTHRITIS AND DIFFERENTIATION FROM UNDIFFERENTIATED SPONDYLOARTHRITIS

2020 ◽  
Vol 79 (Suppl 1) ◽  
pp. 1633.2-1634
Author(s):  
F. Cosan ◽  
O. M. Gedar
Keyword(s):  
Causative Agent ◽  
Reactive Arthritis ◽  
Case Reports ◽  
Experimental Studies ◽  
Classification Criteria ◽  
General Definition ◽  
Parasitic Infections ◽  
Undifferentiated Spondyloarthritis ◽  
Classical Definition ◽  
Definition Of

Background:Reactive arthritis (ReA) is defined by 1999 ACR criteria as arthritis preceding a bacterial genitourinary (GUS) or gastrointestinal (GIS) infection in 3 days-6 weeks and evidence of triggering infection. Recently, ReA is classified as SpA and patients who do not fulfill SpA criteria are classified as undifferentiated spondyloarthritis (USpA) according to ASAS/EULAR SpA classification criteria.Objectives:In several case reports which are associated with other infective agents are reported and the definition is extended for some clinicians so that SpA which is occurred after any infection is called as ReA. On the other hand, some researchers still accept the classical definition of ReA. The problem with the heterogeneity of opinions and unstandardized definition of ReA hinders studies about pathogenesis and standardization of treatments. In this study, we aimed to determine the spectrum of the use of the definition of reactive arthritis in publications in PubMed between 2009-2019.Methods:The ReA keyword is searched in PubMed for the years between 2009-2019. 248 different publications have been identified and included in this research. 89 articles, 47 reviews, 108 case reports, 2 guidelines, and 2 editorials reviewed for the definition of ReA.Results:Only 42.7% (106 patients) of these publications meet the classical definition which suggests ReA after only GIS and GUS infections. In 4 (1.6%) of the publications ReA was defined after GIS, GUS and oropharyngeal infections; in 3 (1,2%) of the publications after any bacterial infection; in 9 (3.6%) of the publications after any infection. In 8 (3.2%) of the publications, ReA and USPA was used correspondingly. In 39 (15,7%) of the publications the term agent related, ReA was used without making a general definition for ReA. 79 publications (31,9%) have not defined ReA.According to causative agent and ReA relationship, in 64 (24,6%) general infective agents, in 75 (30,2%) classical agents, in 22 (8,9%) other bacterial agents, in 23 (9,3%) streptococcus, in 10(4%) intravesical BCG, in 6 (2.4%) HIV, in 6 (2.4%) tuberculosis, in 12 (4,8%) clostrudium difficle, in 2 (0.8%) parasites were reported. In 31 (12,5%) of the publications the causative agent for the ReA was unknown, the diagnosis was made clinically.Conclusion:In this study, it is aimed to draw attention terminology intricacy and the need for the standardization of the definition of ReA and USpA. It is clear that to standardize the definition of Rea and USpA is necessary. Between 2009-2019 there are reported cases diagnosed as ReA associated with bacterial infections (especially with Clostridium difficile, streptococcus and tuberculosis infections), and viral infections (by a majority with HIV), and parasitic infections. It is not clear if we need to define them classically or define them as USPA. Another important consideration is the necessity of extended laboratory investigations to find out the real causative agent even if the patient is clinically diagnosed with ReA. The requirement of the differentiation between ReA and USpA must be revealed for therapeutic researches.References:[1]A proposal for the classification of patients for clinical and experimental studies on reactive arthritis. Pacheco-Tena C, Burgos-Vargas R, Vázquez-Mellado J, Cazarín J, Pérez-Díaz JA. J Rheumatol. 1999 Jun;26(6):1338-46.[2]The Assessment of SpondyloArthritis International Society classification criteria for peripheral spondyloarthritis and for spondyloarthritis in general. Rudwaleit M, van der Heijde D, Landewé R, Akkoc N, Brandt J, Chou CT, Dougados M, Huang F, Gu J, Kirazli Y, et al. Ann Rheum Dis. 2011;70:25–31.Disclosure of Interests:None declared

scholarly journals Proposing 3D Thermal Technology for Heritage Building Energy Monitoring

2021 ◽  
Vol 13 (8) ◽  
pp. 1537
Author(s):  
Antonio Adán ◽  
Víctor Pérez ◽  
José-Luis Vivancos ◽  
Carolina Aparicio-Fernández ◽  
Samuel A. Prieto
Keyword(s):  
Computer Vision ◽  
Dimensional Space ◽  
Three Dimensional ◽  
Building Energy ◽  
Energy Monitoring ◽  
3D Computer Vision ◽  
Building Monitoring ◽  
Heritage Buildings ◽  
Heritage Building ◽  
Definition Of

The energy monitoring of heritage buildings has, to date, been governed by methodologies and standards that have been defined in terms of sensors that record scalar magnitudes and that are placed in specific positions in the scene, thus recording only some of the values sampled in that space. In this paper, however, we present an alternative to the aforementioned technologies in the form of new sensors based on 3D computer vision that are able to record dense thermal information in a three-dimensional space. These thermal computer vision-based technologies (3D-TCV) entail a revision and updating of the current building energy monitoring methodologies. This paper provides a detailed definition of the most significant aspects of this new extended methodology and presents a case study showing the potential of 3D-TCV techniques and how they may complement current techniques. The results obtained lead us to believe that 3D computer vision can provide the field of building monitoring with a decisive boost, particularly in the case of heritage buildings.

scholarly journals Targeting hepatocyte growth factor in epithelial–stromal interactions in an in vitro experimental model of human periodontitis

Odontology ◽  
2021 ◽  
Author(s):  
Yoko Yamaguchi ◽  
Akira Saito ◽  
Masafumi Horie ◽  
Akira Aoki ◽  
Patrick Micke ◽  
...  
Keyword(s):  
Growth Factor ◽  
Hepatocyte Growth Factor ◽  
Experimental Studies ◽  
Three Dimensional ◽  
Collagen Gel ◽  
Neutralizing Antibody ◽  
Chronic Inflammatory Disease ◽  
Collagen Degradation ◽  
Hepatocyte Growth

AbstractPeriodontitis is a chronic inflammatory disease leading to progressive connective tissue degradation and loss of the tooth-supporting bone. Clinical and experimental studies suggest that hepatocyte growth factor (HGF) is involved in the dysregulated fibroblast–epithelial cell interactions in periodontitis. The aim of this study was to explore effects of HGF to impact fibroblast-induced collagen degradation. A patient-derived experimental cell culture model of periodontitis was applied. Primary human epithelial cells and fibroblasts isolated from periodontitis-affected gingiva were co-cultured in a three-dimensional collagen gel. The effects of HGF neutralizing antibody on collagen gel degradation were tested and transcriptome analyses were performed. HGF neutralizing antibody attenuated collagen degradation and elicited expression changes of genes related to extracellular matrix (ECM) and cell adhesion, indicating that HGF signaling inhibition leads to extensive impact on cell–cell and cell–ECM interactions. Our study highlights a potential role of HGF in periodontitis. Antagonizing HGF signaling by a neutralizing antibody may represent a novel approach for periodontitis treatment.

Anion packing density: a universal quantity for both dense and porous crystalline inorganic phases

2002 ◽  
Vol 58 (3) ◽  
pp. 457-462 ◽  
Author(s):  
F. Liebau ◽  
H. Küppers
Keyword(s):  
High Pressure ◽  
Packing Density ◽  
Three Dimensional ◽  
Ionic Radii ◽  
Generalized Framework ◽  
Molal Volumes ◽  
Definition Of ◽  
Anion Packing ◽  
Very High ◽  
Framework Density

To compare densities of inorganic high-pressure phases their molal volumes or specific gravities are usually employed, whereas for zeolites and other microporous materials the so-called framework density, FD, is applied. The definition of FD, which refers only to phases with three-dimensional tetrahedron frameworks, is extended to a `generalized framework density' d f, which is independent of the dimensionality of the framework and the coordination number(s) of the framework cations. In this paper the anion packing density, d ap, is introduced as a new quantity which is not only applicable to any inorganic phase but, in contrast to FD and d f, also allows quantitative comparisons to be made for crystalline inorganic phases of any kind. The anion packing density can readily be calculated if the volume and content of the unit cell and the radii of the anions of a phase are known. From d ap values calculated for high-pressure silica polymorphs studied under very high pressure, it is concluded that Shannon–Prewitt effective ionic radii do not sufficiently take into account the compressibility of the anions.

scholarly journals Numerical and Experimental Studies on a Three-Dimensional Numerical Wave Tank

IEEE Access ◽  
2018 ◽  
Vol 6 ◽  
pp. 6585-6593 ◽  
Author(s):  
Xiaojie Tian ◽  
Qingyang Wang ◽  
Guijie Liu ◽  
Wei Deng ◽  
Zhiming Gao
Keyword(s):  
Experimental Studies ◽  
Three Dimensional ◽  
Numerical Wave Tank ◽  
Wave Tank ◽  
Numerical Wave

The Use of Photogrammetry in Piping Design

1983 ◽  
Vol 197 (2) ◽  
pp. 125-138 ◽  
Author(s):  
P A Bracewell ◽  
U R Klement
Keyword(s):  
Information Retrieval ◽  
Mathematical Formulation ◽  
Three Dimensional ◽  
Cost Effective ◽  
Process Industry ◽  
Process Plant ◽  
Definition Of ◽  
High Degree ◽  
Positional Data

Piping design for ‘revamp’ projects in the process industry requires the retrieval of large amounts of ‘as-built’ data from existing process plant installations. Positional data with a high degree of accuracy are required. Photogrammetry, the science of measurement from photographs, was identified in Imperial Chemical Industries plc (ICI) as a suitable tool for information retrieval. The mathematical formulation enabling the definition of three-dimensional positions from photographic information is described. The process of using ICI's photogrammetric system for the definition of complete objects such as structures and pipes is illustrated. The need for specialized photogrammetric software for design purposes is explained. A case study describing how the photogrammetric system has been applied is described and graphical outputs from this exercise are shown. It is concluded that this particular photogrammetric system has proved to be a cost effective and accurate tool for the retrieval of ‘as-built’ information.

Sign in / Sign up

Export Citation Format

Share Document