On the Propagation of Turbulent Jet-Flame in a Closed Vessel

1981 ◽  
Author(s):  
Junichi Furukawa ◽  
Tsutomu Gomi
Keyword(s):  
Turbulent Jet ◽  
Closed Vessel ◽  
Jet Flame

Hydrodynamic instability and shear layer effect on the sound emission of a turbulent jet flame

2015 ◽  
Author(s):  
Stephan Schlimpert ◽  
Seong Ryong Koh ◽  
Antje Feldhusen ◽  
Benedikt Roidl ◽  
Matthias H. Meinke ◽  
...  
Keyword(s):  
Shear Layer ◽  
Hydrodynamic Instability ◽  
Turbulent Jet ◽  
Sound Emission ◽  
Jet Flame ◽  
Layer Effect

scholarly journals Effect of Temperature Conditions on Flame Evolutions of Turbulent Jet Ignition

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2226
Author(s):  
Jiaying Pan ◽  
Yu He ◽  
Tao Li ◽  
Haiqiao Wei ◽  
Lei Wang ◽  
...  
Keyword(s):  
Flame Propagation ◽  
Early Stage ◽  
Turbulent Jet ◽  
Combustion Stability ◽  
Effect Of Temperature ◽  
Main Chamber ◽  
Detailed Chemical Kinetics ◽  
Jet Flame ◽  
Spherical Flame ◽  
Temperature Conditions

Turbulent jet ignition technology can significantly improve lean combustion stability and suppress engine knocking. However, the narrow jet channel between the pre-chamber and the main chamber leads to some difficulties in heat exchange, which significantly affects combustion performance and mechanical component lifetime. To clarify the effect of temperature conditions on combustion evolutions of turbulent jet ignition, direct numerical simulations with detailed chemical kinetics were employed under engine-relevant conditions. The flame propagation in the pre-chamber and the early-stage turbulent jet ignition in the main chamber were investigated. The results show that depending on temperature conditions, two types of flame configuration can be identified in the main chamber, i.e., the normal turbulent jet flame propagation and the spherical flame propagation, and the latter is closely associated with pressure wave disturbance. Under low-temperature conditions, the cold jet stoichiometric mixtures and the vortexes induced by the jet flow determine the early-stage flame development in the main chamber. Under intermediate temperature conditions, pre-flame heat release and leading pressure waves are induced in the jet channel, which can be regarded as a transition of different combustion modes. Whereas under high-temperature conditions, irregular auto-ignition events start to occur, and spherical flame fronts are induced in the main chamber, behaving faster flame propagation.

Evaluation of a Turbulent Jet Flame Flashback Correlation Applied to Annular Flow Configurations With and Without Swirl

2021 ◽  
Author(s):  
Vincent McDonell ◽  
Elliot Sullivan-Lewis ◽  
Alireza Kalantari ◽  
Priyank Saxena
Keyword(s):  
Annular Flow ◽  
Turbulent Jet ◽  
Jet Flame ◽  
Flow Configurations ◽  
Flame Flashback

Simulation of Methanol-Air Two-Phase Flames Using Various Turbulent Combustion Models

2009 ◽  
Author(s):  
F. Wang ◽  
Y. Huang ◽  
Y. Z. Wu
Keyword(s):  
Experimental Data ◽  
Turbulent Combustion ◽  
Turbulent Jet ◽  
Combustion Model ◽  
Air Flow Rate ◽  
Two Phase ◽  
Jet Flame ◽  
Combustion Simulation ◽  
Turbulent Combustion Model ◽  
Turbulent Models

Though fossil fuel is running out, liquid fuels nowadays still provide the most energy used by industrial furnaces, automotive and aero engines. How to predict a two-phase turbulent combustion flame is still a big problem to designers. Generally, the liquid fuel is sprayed and mixed with oxygen, and the flame characteristics depends on the fuel atomization, the fuel droplet spatial distribution, and its interaction with the turbulent oxidizer flow field: turbulent heat, mass and momentum transfer, complicated chemical kinetics, and turbulent-chemistry interaction. Turbulent combustion model is a key point for the two phase combustion simulation. For its short time consuming, Reynolds Averaged Navier Stokes (RANS) method nowadays still is the major tool for gas turbine chamber (GTC) designers, but there is not a universal method in RANS GTC spray combustion simulation at present especially for the two-phase turbulent combustion. The Eddy-Break-Up turbulent combustion model (EBU), Eddy Dissipation Concept turbulent combustion model (EDC), steady Laminar Flame-let turbulent combustion Model (LFM) and the Composition PDF transport turbulent combustion model (CPDF) are all widely used models. In this paper, these four turbulent models are used to simulate a methane-air turbulent jet flame measured by Sandia Lab first, then three methanol-air two-phase turbulent flames, in order to know the ability of these turbulent models. In the gas turbulent jet flame simulation, the result of LFM model and CPDF model are in better agreement with the experimental data than those of the EBU and the EDC models’ results. The reason is that the EBU model and EDC model are overestimated the effect of turbulent. In the three different cases of the two phase combustion simulation, CPDF is the best. The prediction ability of the other three models is different in different cases. The EDC predictions are closer to the experimental data when the air flow rate value is lower, whereas the LFM predictions are better when the air flow rate value is higher.

Images of the two-dimensional field and temperature gradients to quantify mixing rates within a non-premixed turbulent jet flame

1995 ◽  
Vol 101 (1-2) ◽  
pp. 58-68 ◽  
Author(s):  
David A. Everest ◽  
James F. Driscoll ◽  
Werner J.A. Dahm ◽  
Douglas A. Feikema
Keyword(s):  
Temperature Gradients ◽  
Turbulent Jet ◽  
Two Dimensional ◽  
Jet Flame ◽  
Mixing Rates

scholarly journals High-speed volumetric imaging of formaldehyde in a lifted turbulent jet flame using an acousto-optic deflector

2020 ◽  
Vol 61 (4) ◽  
Author(s):  
Tao Li ◽  
Bo Zhou ◽  
Jonathan H. Frank ◽  
Andreas Dreizler ◽  
Benjamin Böhm
Keyword(s):  
High Speed ◽  
Turbulent Jet ◽  
Volumetric Imaging ◽  
Jet Flame
Sign in / Sign up

Export Citation Format

Share Document