Effect of Notch, Corrosion and Stress Ratio on the Constant and Variable Amplitude Fatigue Behavior of two Materials

1981 ◽  
Author(s):  
P. R. Bhowal
Keyword(s):  
Stress Ratio ◽  
Fatigue Behavior ◽  
Variable Amplitude ◽  
Variable Amplitude Fatigue

Constant and Variable Amplitude Fatigue Behavior of Five Cast Steels at Room Temperature and −45°C

1984 ◽  
Vol 106 (1) ◽  
pp. 25-37 ◽  
Author(s):  
R. I. Stephens ◽  
J. H. Chung ◽  
A. Fatemi ◽  
H. W. Lee ◽  
S. G. Lee ◽  
...  
Keyword(s):  
Fatigue Crack ◽  
Fatigue Crack Growth ◽  
Crack Growth ◽  
Room Temperature ◽  
Fatigue Behavior ◽  
Growth Behavior ◽  
Constant Amplitude ◽  
Variable Amplitude ◽  
Cast Steels ◽  
Variable Amplitude Fatigue

A comprehensive fatigue program was undertaken at room temperature and −45°C (−50°F) for five representative carbon or low alloy cast steels. Constant amplitude low and high cycle axial fatigue behavior, cyclic stress-strain behavior, constant-amplitude fatigue-crack-growth behavior and variable-amplitude fatigue-crack-initiation and -growth behavior were determined. The fatigue resistance at low temperature was usually equal to or better than at room temperature except for one material under variable amplitude fatigue crack growth conditions. SEM analysis revealed similar fatigue crack growth mechanisms at both room and low temperature, even though some tests were well below the NDT temperature. Most fatigue resistance for the five cast steels was consistent with that for wrought steels. Fatigue test procedures generally developed with wrought steels were completely satisfactory for these cast steels.

Corrosion Fatigue of AZ91E-T6 Cast Magnesium Alloy in a 3.5 Percent NaCl Aqueous Environment

1995 ◽  
Vol 117 (3) ◽  
pp. 293-298 ◽  
Author(s):  
R. I. Stephens ◽  
C. D. Schrader ◽  
K. B. Lease
Keyword(s):  
Fatigue Life ◽  
Magnesium Alloy ◽  
Fatigue Behavior ◽  
Fatigue Tests ◽  
Mean Stress ◽  
Constant Amplitude ◽  
Variable Amplitude ◽  
Cast Magnesium Alloy ◽  
Cast Magnesium ◽  
Variable Amplitude Fatigue

The objective of this research was to obtain and compare constant and variable amplitude fatigue behavior of AZ91E-T6 cast magnesium alloy in both an air and 3.5 percent NaCl aqueous corrosive environment. An additional objective was to determine if commonly used models that describe fatigue behavior and fatigue life are applicable to this material and test environment. Fatigue tests included constant amplitude strain-controlled low cycle fatigue with strain ratio, R, equal to 0, −1 and −2, Region II constant amplitude fatigue crack growth with load ratio, R, equal to 0.05 and 0.5 and variable amplitude fatigue tests using keyhole notched specimens. In all fatigue tests, the corrosion environment was significantly detrimental relative to the air environment. Mean strains influenced fatigue life only if accompanied by significant mean stress. The Morrow and Smith, Watson, and Topper mean stress models provided both accurate and inaccurate fatigue life calculations. Likewise, variable amplitude fatigue life calculations using the local strain approach and based upon the formation ofal mm crack at the keyhole notch were both accurate and fairly inaccurate depending on the specific model used.

scholarly journals Experimental Study on Variable-Amplitude Fatigue of Welded Cross Plate-Hollow Sphere Joints in Grid Structures

2018 ◽  
Vol 2018 ◽  
pp. 1-15 ◽  
Author(s):  
Jin-Feng Jiao ◽  
Hong-Gang Lei ◽  
Y. Frank Chen
Keyword(s):  
Fatigue Life ◽  
Hollow Sphere ◽  
Fatigue Behavior ◽  
Fatigue Tests ◽  
Metallographic Analysis ◽  
Variable Load ◽  
Random Loading ◽  
Variable Amplitude ◽  
Different Types ◽  
Variable Amplitude Fatigue

The fatigue stress amplitude of the welded cross plate-hollow sphere joint (WCPHSJ) in a grid structure varies due to the random loading produced by suspending cranes. A total of 14 specimens considering three different types of WCPHSJs were prepared and tested using a specially designed test rig. Four typical loading conditions, “low-high,” “high-low,” “low-high-low,” and “high-low-high,” were first considered in the tests to investigate the fatigue behavior under variable load amplitudes, followed by metallographic analyses. The experimental and metallographic analysis results provide a fundamental understanding on the fatigue fracture form and fatigue mechanism of WCPHSJs. Based on the available data from constant-amplitude fatigue tests, the variable-amplitude fatigue life of the three types of WCPHSJs was estimated using the Miner rule and Corten-Dolan theory. Since both accumulative damage theories yield virtually same damaging results, the Miner rule is hence suggested to estimate the fatigue life of WCPHSJs.

Experimental research on variable-amplitude fatigue behavior of cracked mortar after epoxy grouting

2021 ◽  
Vol 304 ◽  
pp. 124600
Author(s):  
Zhi Wang ◽  
Wenjing Qin ◽  
Long Li ◽  
Yuxiang Yang ◽  
Haopeng Lv ◽  
...  
Keyword(s):  
Experimental Research ◽  
Fatigue Behavior ◽  
Variable Amplitude ◽  
Variable Amplitude Fatigue
Sign in / Sign up

Export Citation Format

Share Document