scholarly journals Performance Deterioration of Commercial High-Bypass Ratio Turbofan Engines

1980 ◽  
Author(s):  
Charles M. Mehalic ◽  
Joseph A. Ziemianski
Keyword(s):  
Turbofan Engines ◽  
Performance Deterioration ◽  
Bypass Ratio

Optimizing Separate Exhaust Turbofans for Cruise Specific Fuel Consumption

2017 ◽  
Vol 139 (12) ◽  
Author(s):  
Syed J. Khalid
Keyword(s):  
Fuel Consumption ◽  
Control Algorithm ◽  
Velocity Ratio ◽  
Transmission Efficiency ◽  
Specific Fuel Consumption ◽  
Variable Geometry ◽  
Nozzle Throat ◽  
Propulsive Efficiency ◽  
Turbofan Engines ◽  
Bypass Ratio

Cruise specific fuel consumption (SFC) of turbofan engines is a key metric for increasing airline profitability and for reducing CO2 emissions. Although increasing design bypass ratio (BPR) of separate exhaust turbofan configurations improves cruise SFC, further improvements can be obtained with online control actuated variable geometry modulations of bypass nozzle throat area, core nozzle throat area, and compressor variable vanes (CVV/CVG). The scope of this paper is to show only the benefits possible, and the process used in determining those benefits, and not to suggest any particular control algorithm for searching the best combination of the control effectors. A parametric cycle study indicated that the effector modulations could increase the cruise BPR, core efficiency, transmission efficiency, propulsive efficiency, and ideal velocity ratio resulting in a cruise SFC improvement of as much as 2.6% depending upon the engine configuration. The changes in these metrics with control effector variations will be presented. Scheduling of CVV is already possible in legacy digital controls; perturbation to this schedule and modulation of nozzle areas should be explored in light of the low bandwidth requirements at steady-state cruise conditions.

Optimum Cycle Parameters for Turbofan Engines

1970 ◽  
Author(s):  
W. C. Moffatt
Keyword(s):  
Simple Procedure ◽  
Pressure Ratio ◽  
Inlet Temperature ◽  
Closed Form Solutions ◽  
Turbofan Engines ◽  
Compressor Pressure Ratio ◽  
Temperature Component ◽  
Flow Through ◽  
Specific Thrust ◽  
Bypass Ratio

This paper presents closed-form solutions for optimum compressor pressure ratio, bypass ratio and fan pressure ratio, given the turbine inlet temperature, component efficiencies and flight Mach number for a turbofan engine. In addition a simple procedure is outlined for obtaining the optimum combination of these quantities and a sample calculation is included. The optimum condition is defined as that which maximizes the specific thrust (thrust per pound per second of air flow through the gasifier) of the engine. The effects of differing gas properties in different portions of the engine are included in the analysis.

The effect of inlet distortion on low bypass ratio turbofan engines

2020 ◽  
Vol 234 (8) ◽  
pp. 1395-1413
Author(s):  
Vishwas Verma ◽  
Gursharanjit Singh ◽  
AM Pradeep
Keyword(s):  
Total Pressure ◽  
Stability Margin ◽  
Leading Edge ◽  
Axial Fan ◽  
Turbofan Engines ◽  
Inlet Distortion ◽  
Pressure Profiles ◽  
History Of ◽  
The Stability ◽  
Bypass Ratio

Inlet flow non-uniformity, commonly known as inflow distortion, has been a long-standing problem in the history of gas turbine engines. Distortion can be present in the form of total pressure, total temperature or inflow incidence or any combinations of these. The search for better and robust performance requires engines that can sustain a large amount of inlet distortion without considerable loss in the thrust. In the present paper, the effect of total pressure distortion on a single-stage compressor and low bypass ratio fans are studied. Distortion near hub and tip in the form of step radial total pressure profiles is imposed at far upstream of the rotor leading edge. A systematic approach to qualitatively predict the performance maps in the presence of these distortions is discussed. Further, two extents of total pressure distortion are explored for constant inlet distortion intensity. Hub distortion is found to increase the stability margin, whereas tip distortion reduces it. On extending the distortion extent, hub distortion drastically reduces the stability margin, whereas a comparatively lower reduction in stability margin with tip distortion is observed. The critical distortion limit is observed by varying the inlet distortion extent. Also, it is found that downstream ducts in the bypass axial fan do not interact with the upstream fan. This can be exploited to perform independent simulations of the core engine from low bypass ratio fans. Hub distortion is found to drastically affect the duct performance owing to the presence of thicker upstream inlet boundary layer.

Empirical estimation of engine-integration noise for high bypass ra-tio turbofan engines

2021 ◽  
Vol 263 (2) ◽  
pp. 4511-4519
Author(s):  
Incheol Lee ◽  
Yingzhe Zhang ◽  
Dakai Lin
Keyword(s):  
Experimental Data ◽  
Pressure Side ◽  
Empirical Estimation ◽  
Low Frequencies ◽  
High Frequencies ◽  
Turbofan Engines ◽  
Proposed Model ◽  
The Impact ◽  
Bypass Ratio ◽  
Good Agreement

To investigate the impact of installation on jet noise from modern high-bypass-ratio turbofan engines, a model-scale noise experiment with a jet propulsion system and a fuselage model in scale was conducted in the anechoic wind tunnel of ONERA, CEPRA 19. Two area ratios (an area of the secondary nozzle over an area of the primary nozzle), 5 and 7, and various airframe configurations such as wing positions relative to the tip of the engine nacelle and flap angles, were considered. Based on the analysis of experimental data, an empirical model for the prediction of engine installation noise was proposed. The model comprises two components: one is the interaction be-tween the jet and the pressure side of the wing, and the other is the interaction between the jet and the flap tip. The interaction between the jet and the pressure side of the wing contributes to the noise at the low frequencies (≤ 1.5 kHz), and the interaction between the jet and the flap tip con-tributes to the noise at the high frequencies. The proposed model showed a good agreement with the experimental data.

Feasibility Study of Some Novel Concepts for High Bypass Ratio Turbofan Engines

2009 ◽  
Author(s):  
Dipanjay Dewanji ◽  
G. Arvind Rao ◽  
Jos van Buijtenen
Keyword(s):  
Fuel Consumption ◽  
Substantial Reduction ◽  
Substantial Improvement ◽  
Fuel Price ◽  
Turbofan Engine ◽  
Turbofan Engines ◽  
Fuel Flow ◽  
Blade Tip ◽  
Fan Blade ◽  
Bypass Ratio

The soaring fuel price and the burgeoning environmental concerns have compelled global research towards cleaner engines, aimed at substantial reduction in emission, noise and fuel consumption. In this context, the present research investigates the feasibility of some novel engine concepts, namely Geared Turbofan and Intercooled Recuperated Turbofan concepts, by hypothetically applying them into an existing state-of-the-art high bypass ratio engine. This paper made an effort to estimate the effects on the baseline engine performances due to the introduction of these two concepts into it. By performing steady state simulations, it was found that the incorporation of the Geared Turbofan concept into the existing Turbofan engine caused a significant reduction in thrust specific fuel consumption, engine weight, and fan blade tip speed. However, when simulations were also carried out by incorporating the Intercooler and Recuperator concept in the baseline turbofan engine, it did not demonstrate any substantial improvement in fuel consumption. It was observed that the fuel flow rate was influenced to a large extent by heat exchanger’s effectiveness and the pressure drop within it. The overall engine weight was also found to get increased due to the inclusion of massive heat exchangers necessary for the system.

Optimizing Separate Exhaust Turbofans for Cruise Specific Fuel Consumption

2016 ◽  
Author(s):  
Syed Khalid
Keyword(s):  
Fuel Consumption ◽  
Control Algorithm ◽  
Velocity Ratio ◽  
Transmission Efficiency ◽  
Specific Fuel Consumption ◽  
Variable Geometry ◽  
Nozzle Throat ◽  
Propulsive Efficiency ◽  
Turbofan Engines ◽  
Bypass Ratio

Cruise specific fuel consumption (SFC) of turbofan engines is a key metric for increasing airline profitability and for reducing CO2 emissions. Although increasing design bypass ratio (BPR) of separate exhaust turbofan configurations improves cruise SFC, further improvements can be obtained with control actuated variable geometry modulations of core nozzle throat area, bypass nozzle throat area, and compressor variable vanes (CVV). The scope of this paper is to show only the benefits possible, and the process used in determining those benefits, and not to suggest any particular control algorithm for searching the best combination of the control effectors. A parametric cycle study indicated that the effector modulations could increase the cruise BPR, core efficiency, transmission efficiency, propulsive efficiency, and ideal velocity ratio resulting in a cruise SFC improvement of as much as 2.6% depending upon the engine configuration. The changes in these metrics with control effector variations will be presented. Modulation of CVV is already possible in legacy digital controls, and modulation of nozzle areas should be explored in light of the low bandwidth requirements at steady-state cruise conditions.

Steady-Flow Analysis of Low Pressure Compression System for Turbofan Engines

2007 ◽  
Author(s):  
Abdulnaser I. Sayma
Keyword(s):  
Boundary Conditions ◽  
Static Pressure ◽  
Flow Analysis ◽  
Low Pressure ◽  
Flow Simulations ◽  
Fan Performance ◽  
Turbofan Engines ◽  
Flow Domain ◽  
Pressure Boundary Conditions ◽  
Bypass Ratio

This paper has two main objectives. It first aims at presenting a method of prescribing boundary conditions for the steady-state flow simulations of low pressure compression systems for turbofan engines. The methodology is generic and it can be applied for steady and unsteady flow simulations of numerous similar multi-component applications. The basic idea is to extend the flow domain upstream to the far field and downstream beyond the first set of stator vanes, both in the bypass and core, where variable area nozzles are used. Fixed static pressure boundary conditions are used downstream of the nozzles which are representative of downstream blockage. With such an approach, the need to prescribe accurate boundary conditions immediately upstream and downstream of the fan is eliminated. An iterative approach is then used to obtain the correct bypass ratio. The second objective of the paper is to demonstrate the use of the methodology in mapping out the loss loop for the outflow guide vanes (OGV) and examine its effects on fan performance. Wherever possible, predictions were checked against measured data and good overall agreement was obtained.

Sign in / Sign up

Export Citation Format

Share Document