A Turbocharged Diesel Engine Test for Evaluating Ring Sticking Tendencies of High Quality Diesel Engine Oils

1976 ◽  
Author(s):  
C. H. Knight
Keyword(s):  
Diesel Engine ◽  
Engine Test ◽  
High Quality ◽  
Turbocharged Diesel Engine ◽  
Engine Oils

scholarly journals Assessment of an electrical coolant pump on a heavy-duty diesel engine

2021 ◽  
Vol 3 (3) ◽  
Author(s):  
Markus Kiesenhofer
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Carbon Dioxide Emissions ◽  
Test Bench ◽  
Engine Test ◽  
The European Union ◽  
Engine Test Bench ◽  
Commercial Vehicles ◽  
Coolant Pump ◽  
Vehicle Class

AbstractHybridization of the drive train in commercial vehicles is a key solution toward meeting the strict future requirements to reduce carbon dioxide emissions within the European Union. In order to decrease fleet consumption a large number of different hybrid systems are already available in series in the passenger car sector. Due to the cheap and powerful 48 volt hybrid components and the lower hazard potential compared to high voltage, future commercial vehicles could also benefit from the 48V technology and contribute to lower fleet fuel consumption. Therefore, a complete 48V mild hybrid system was built on the diesel engine test bench as part of a research project. This paper highlights the utilization of a powerful 48V-motor to propel the coolant pump on a diesel engine of the 13-L commercial vehicle class. Three different drive variants of the coolant pump were implemented and measured on the diesel engine test bench. MATLAB®/Simulink®-simulations were conducted to assess the possible fuel savings in three different driving cycles. This paper provides a summary and interpretation of the measurement and simulation results. The simulation studies predict a decrease of fuel consumption of up to 0.94%. Furthermore, the additional advantages of electrified coolant pumps based on 48V are discussed.

Stabilizing Excessive EGR With an Oxidation Catalyst on a Modern Diesel Engine

2002 ◽  
Author(s):  
Ming Zheng ◽  
David K. Irick ◽  
Jeffrey Hodgson
Keyword(s):  
Diesel Engine ◽  
Oxidation Catalyst ◽  
Stable Operation ◽  
Exhaust Gas ◽  
Oxides Of Nitrogen ◽  
Engine Operation ◽  
Turbocharged Diesel Engine ◽  
New Approach ◽  
Cyclic Variations ◽  
Gas Recirculation

For diesel engines (CIDI) the excessive use of exhaust gas recirculation (EGR) can reduce in-cylinder oxides of nitrogen (NOx) generation dramatically, but engine operation can also approach zones with high instabilities, usually accompanied with high cycle-to-cycle variations and deteriorated emissions of total hydrocarbon (THC), carbon monoxide (CO), and soot. A new approach has been proposed and tested to eliminate the influences of recycled combustibles on such instabilities, by applying an oxidation catalyst in the high-pressure EGR loop of a turbocharged diesel engine. The testing was directed to identifying the thresholds of stable operation at high rates of EGR without causing cycle-to-cycle variations associated with untreated recycled combustibles. The elimination of recycled combustibles using the oxidation catalyst showed significant influences on stabilizing the cyclic variations, so that the EGR applicable limits are effectively extended. The attainability of low NOx emissions with the catalytically oxidized EGR is also evaluated.

Sign in / Sign up

Export Citation Format

Share Document